Meter Stay Extension
€12.29
Replacement meter stay extension nylon shaft. Suitable for the following models:
BPFS-0079
BPFS-0092
See table for application of meter stay extensions with our body kits:
Spacer left side hanger mount, Ninja 400
€3.56
Spacer, Left Side Hanger Mount, Ninja 400
TYGA step kit replacement right side Hanger, Hawk/Bros
€43.99
TYGA step kit replacement right side Hanger, Hawk/Bros
TYGA no: STAH-0015
SKU: hon-10927 Categories: ALL products, By model, Hawk/Bros 400/650, Honda, ShopCarbon race airbox, NC30 NC35
€159.63
Perfect carburation requires a large volume of still air which most airboxes struggle to achieve.
Our race airbox increases this volume by 8% for more stable performance.
Great product for road but also on track!
TYGA no: BPCX-9009
SKU: hon-10117 Categories: ALL products, High performance, High performance, High performance, Honda, RVF400RR NC35, Shop, VFR400RR NC30Turn signal relay LED , 1990 Honda
€18.19
Turn Signal Relay, Replacement for Honda 1990s Type.
Electronically speed controlled flasher relay especially designed to be used with LED turn signals. This unit will flash at the correct speed regardless of the wattage of the turn signals so it can be used with stock fronts and LED rears, all LEDs or even all stock.* Easy to install, plugs and plays where the stock Honda one is installed. Re-use the stock Honda rubber sheath for mounting it.
*For some Hondas such as the MC21, NC30 and NC35, this relay works fine with 2 LED turn signals installed or with all four of the stock turn signals installed. However, if 4 LED turn signals are installed, then you need to install one of the following in the wiring harness:
TYGA no: TELC-0002
SKU: hon-10580 Categories: ALL products, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R MC19, CBR250RR MC22, CBR400RR NC23, CBR400RR NC29, CBR900RR 1992- 95, Honda, NR750, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, RVF400RR NC35, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750R RC30, VTR1000Sp1SP2Top triple clamp CNC black RACE, KTM RC390, 2014- 21
€442.15
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1931
SKU: ktm-10219 Categories: ALL products, CNC parts, CNC parts, Exhausts, KTM, RC 125/200, RC 390, Stock list, all modelsVHM insert for head, Standard VHM stock.
€52.95
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AE.....-
SKU: alg-10380 Categories: ALL products, Aprilia, High performance, High performance, High performance, High performance, High performance, RGV250 VJ23, Shop, Various parts, Various parts, VHM productsUpper cowling street RVF, NC35
€284.65
Stock shaped GRP upper fairing, comprising the upper and two side inspection covers of the OEM plastic panels. Supplied with light holes and light fittings. Race version (BPFU-0009) also available.
Suitable with BPFL-0003 stock shaped lowers.
See also kits BPFS-0069 and BPFS-0070.
TYGA no: BPFU-0029
SKU: hon-10147 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, Shop