Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Front fender grp, Ninja 400

85.28

(103.19 inc. VAT )

Front Fender, (GRP), Ninja 400

TYGA no: BPFF-7040

SKU: kaw-10138 Categories: , , ,
Read more

Seat set with carbon race, Honda NSR250 MC28

539.26

(652.50 inc. VAT )

This set of bodywork is designed to replace the stock seat cowling with the street version of our GP Race Seat cowling and includes all parts needed to do the conversion. The kit comprises the parts below which are also available separately.

We make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. . For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessary parts to complete the modification.

BPFS-0003 (street)

BPFS-0004 (race)

uses BPFT-9002 MC21 with carbon front section

BPFS-0059 (street)

BPFS-0060 (race)

uses BPFT-9102 MC21 all GRP construction

BPFS-0004 (street)

BPFS-0005 (race)

uses BPFT-9012 MC28 with carbon front section

BPFS-0045 (street)

BPFS-0046 (race)

uses BPFT-9112 MC28 all GRP construction

The advantages of this seat cowling over stock include:

– Design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent

– higher at the rear, to give the bike a more agressive stance

– better rider control by use of enclosed seat area

– improved strength with precision in design and fitment as well as lighter weight.

TYGA no: BPFS-0006

SKU: hon-10240 Categories: , , , , , , ,
Read more

Section, Final, Slash Cut Slip-On type, Stainless, R25/R3

60.40

(73.08 inc. VAT )

Section, Final, Slash Cut Slip-On type, Stainless, R25/R3

Used with exhaust system EXPS-0071

TYGA no: EXPT-0002

SKU: yam-10076 Categories: , ,
Read more

Airbox carbon, A kit, Honda RS250 NX5

673.59

(815.04 inc. VAT )

Airbox, Carbon/Kevlar, NSR250 MC21/MC28

This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.

Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007

TYGA no: BPCX-0008

SKU: hon-11311 Categories: , , ,
Read more

key holder CNC black, Suzuki RGV 250

121.39

(146.88 inc. VAT )

Ignition Switch Holder, CNC Black, Suzuki RGV250 VJ22

This is a removable ignition switch/lock holder for our Suzuki RGV250 VJ22 top triple clamp. Can be ordered as part of a triple clamp set or by itself or to fit to our TYGA triple clamps TYLY-1046.

TYGA no: TYLY-1146

SKU: suz-10058 Categories: , , , , ,
Read more

O-ring fuel tap, NSR250 MC16- 28

0.60

(0.73 inc. VAT )

Piston D, MC21/28

Read more

Battery Box Cover , Race, GRP, KTM RC390 WSS300

77.43

(93.69 inc. VAT )

Battery Box Cover, Race, GRP, KTM RC390 WSS300

Replacement Battery Box Cover. WSS300, MUST be used with KTM WSS300 hardware

see also:

BPCX-7631UB (Carbon Unpolished)
BPCX-7631B (Carbon Clearcoated)

TYGA no: BPFX-7631B

SKU: ktm-10167 Categories: , , , ,
Read more

Carbon cover, rev. Counter 92mm, Honda

32.14

(38.89 inc. VAT )

Carbon cover set instrument surrounds, Honda

Theses covers fit snuggly over the original plastic Honda gauge covers and adds a sporty appearance. They are also ideal for hiding any ugly scratches or dents that may have occurred over the years. They fit in second and can be held in place with a dab of glue or silicone adhesive. Note, these covers are also available as separate covers.

This product is suitable for the following models:

MC18 NSR250

NC30 VFR400R

RC30 VFR750R

TYGA no: BPCC-0025

SKU: hon-10612 Categories: , , , , , , , ,
Read more