Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer, VFR750F, 3rd Gen, 90-93

1,338.49

(1,619.57 inc. VAT )

Set, pipe full race system round carbon/carbon end cap silencer RH exit, VFR750F gen 4, 94-97

This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.

Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.

For unsurpassed looks, sound and performance, this system comes with the 450mm Round Auluminium Silencer but can be used with a number of our 2″ slip on exhaust silencers

See also our other sets with silencer included:

EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).

**Important Note**

The TYGA system keeps the use of the side stand and pillion foot rests however, the centre stand must be removed prior to installation.

TYGA no: EXPS-0154

SKU: hon-11326 Categories: , , , ,
Read more

Sub-frame (TYGA), Suzuki RGV250 VJ22

143.58

(173.73 inc. VAT )

This subframe is a replacement for the stock Suzuki item and to be used in our TYGA seat cowling kits BPFS-0036, BPFS-0037, BPFS-0038 etc. and bolts up to the VJ22 frame without need for modifying any components. It will not fit the stock Suzuki seat cowling.

The subframe is supplied with all the fasteners needed to mount the various components that are housed under the seat cowling and incorporates a battery tray. This product is made in steel but is much smaller than the stock one and weighs much less without compromising strength.

Not to be used on a motorcycle carrying a passenger and rider.

This subframe is only compatible with the TYGA rear seat, the original seat cowling won’t fit.

TYGA no: TYLY-0028 

SKU: suz-10089 Categories: , , , , , ,
Read more

Gear 5th drive z=24 no.4, RGV250/RS250

104.93

(126.97 inc. VAT )

VHM insert, Aprilia RS125 (alg-10176)

piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.

VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.

We are pleased that we can offer VHM products on our website.

The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design

This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.

Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl

Read more

Kit, Fairing Set, Carbon, Honda NX5 RS250R (1995 NSR250 Style)

2,468.27

(2,986.61 inc. VAT )

Kit, Fairing Set, Carbon, Honda NX5 RS250R (1995 NSR250 Style)

Complete Carbon Bodywork kit which consists of the following products:

Upper Cowling Race, Carbon, NX5 RS250R (Late Model Style) (BPCU-9036)

The Carbon upper fairing is modelled off the 1995 NSR250 racer but will fit any NX5 which has the ram air through the fuel tank system.

Lower Cowling, Carbon, NX5 RS250R (Late Model Style) (BPCL-9036)

The Carbon lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell.

Seat Cowling Race, Carbon, NX5 RS250R (1995 NSR250 Style) (BPCT-9036(p))

This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors.

Seat Support NX5 RS250R (BPCX-9036)

Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)

Made to order, takes approx 1 to 2 weeks to be ready for shipping

TYGA no: BPFS-0189

SKU: hon-10977 Categories: , , , , ,
Read more

Rubber, Tank Front, MC28

0.59

(0.71 inc. VAT )

Rubber, Tank Front, MC28

TYGA no: 17245-107-010

SKU: hon-11168 Categories: , , , , ,
Read more

Seat Cowling (GRP), NSR250 MC21, Stock Shape, Street, Painted Rothmans

713.10

(862.85 inc. VAT )

Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22

CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.

Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.

They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.

Tightening recommendations:

Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.

TYGA no: BPFT-0044Painted

SKU: hon-11283 Categories: , , , , , , ,
Read more

Athena cylinder set with piston, set 1 Aprilia RS250 – Suzuki RGV250

661.61

(800.55 inc. VAT )

This cylinder kit  is a direct replacement for the original (OEM) cylinder from Suzuki/Aprilia and this means it can be installed without making any changes to the engine crankcase. Same porting and all sizes the same.

Read more

Carbon fuel tank (early type), Honda RS250R NX5

1,444.49

(1,747.83 inc. VAT )

Fuel Tank, Carbon, RS250R NX5 (Early Type)

Top quality reproduction of the early non ram air version NX5 fuel tank in carbon fiber.

Finished in high quality UV resistant clear-coat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel, Avgas 100LL to E85 (85% ethanol). Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light ( 2.25 kg) Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts and following the stock shape, the following stock parts can be used (not included):

Fuel Cock
Breather
Front strap
Stock mounting rubbers
Filler cap and seal
IMPORTANT: Please note that this fuel tank, for ease of manufacture, uses the later flush fitting NX5 type filler cap. This can be purchased from HRC (part numbers 17521-NX4-680 for filler cap and 17515-NX5-770 for seal) or we can supply our own TYGA version (Cap: TYLY-0178A, Seal: BPSY-0238) Note the filler cap and the above list of parts are not included with the fuel tank and needs to be purchased separately.

TYGA no: BPCG-0003

SKU: hon-10946 Categories: , , , , ,
Read more