Bumb foam large,
€13.95
This foam seat bum stop is supplied with adhesive surface on back for easy and fast application. Adds the final touch to any race or race rep bike. This size is the larger of the two versions we supply. See BPSP-0003 for smaller version.
TYGA no: BPSP-0002Â
SKU: alg-10081 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, RGV250 VJ22, Shop, SuzukiSpace S/A shaft, Ninja 400
€4.60
Spacer, S/A Shaft, Ninja 400
To be used for STAA-0026 ( Step Kit Kawasaki Ninja 400)
Side cowling B left (GRP), KTM RC125/RC200/RC390
€150.56
Side Cowling B, Left, Race (GRP), KTM RC125/200/390
This lightweight GRP side cowling replaces the heavier stock plastic item. Ideal for racing.
Must be used with:
BPFX-7231L TYGA Performance Side Cowling A, Left, Race (GRP), KTM RC125/200/390.
BPCX-7231L TYGA Performance Side Cowling A, Left, Race (Carbon), KTM RC125/200/390.
Our fairing has the same shape as the original KTM side cowlings, but we have made some updates on the product which makes it stronger and easier to instal.
The TYGA side cowling work together as a set, the original KTM fairing won’t fit the TYGA and vice versa.
When you want to order make sure you order A B.
TYGA no: BPFX-7331L
SKU: ktm-10048 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200, RC 390, ShopHandlebar tube assy, kawasaki ninja 2008 -18
€22.89
Handlebar Tube (Assy), Black. Suitable for both left and right sides for Ninja250R /300R
Comes fitted with plastic bungs in each end.
Bracket rear brake, 84mm Brembo conversion black, Honda MSX125 GROM
€100.41
Bracket, Rear Brake, 84mm Brembo Conversion, Black, MSX125 Grom
This is to fit the 84mm pitch rear caliper.
Also available in silver (TYLY-0093)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
TYGA no: TYLY-1093
SKU: MSX-10078 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, Honda, MSX125 2013 - 2015, MSX125 2021-, MSX125SF 2016 -2020, ShopCarbon chain guard, KTM RC125/RC200/RC390 2022-
€141.35
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPCX-7131B
SKU: ktm-10207 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all modelsCarb Service Kit A, 48 pieces, Honda VFR750R RC30
€97.64
Carb Service Kit A, 44 pieces, Honda VFR750R RC30
LiteTek Carburettor Seal Kit to suit: Honda VFR750R RC30
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-025 Float Bowl Ring, Material: Flourosilicone *
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A *
4x WS-001 Pilot Screw Washer, Material: Stainless Steel
4x OR-009 Drain Screw O-Ring, Material: Viton 70A *
4x OR-040 Air Cut Seal, Material Viton 70A *
4x OR-041 Breather O Ring, Material: Viton 70A **
4x OR-016 Top Cap O-Ring, Material: Viton 70A *
4x OR-042 Float Bowl O-Ring, Material: Viton 70A *
4x OR-011 Overflow O-Ring, Material: Viton 70A **
4x OR-012 Fuel Tee O-Ring, Material: Viton 70A **
4x CS-004 Choke Plunger Cap, Material: HNBR
Honda OEM parts numbers :
* No: 16010-MR7-014 → 16010-MR7-505 or 16010-MR7-691 → 16010-MR7-692 → 16010-MR7-505
** No: 16040-MR7-004
TYGA no: CK-Honda-RC30
SKU: alg-10349 Categories: ALL products, Carburettor Service Kits,, Honda, VFR750R RC30Set, pipe full race system oval carbon/carbon end LH exit, VFR750F gen 4, 94-97
€1,300.90
Set, pipe full race system oval carbon/carbon end, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system can be used with a number of our 2″ slip on exhaust silencers
See also our sets with silencer included:
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand, however, the centre stand and pillion foot rests must be removed prior to installation.
TYGA no: EXPS-0122
SKU: hon-11015 Categories: ALL products, Exhaust systems, Exhaust systems, Exhausts, Honda, RC36-2 -> RC30 replica products, Shop, VFR750F Gen 4, 94-97