Wheel Bearing Set, Front MC18/21/28
€18.58
Replacement front wheel bearing. OEM quality assured
2x Bearings included
TYGA no: TYPP-0009
SKU: hon-10833 Categories: ALL products, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Various parts, Various parts, Various partsFront sprocket 14T, Honda MSX125 GROM
€7.37
14T steel front sprocket for Honda MSX125. Made by JT. To fit standard #420 chain.
TYGA no: JTA-H-WA-420-F-14T
SKU: MSX-10085 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, Shop, Sprockets, SprocketsCarbon under cowling, Honda MSX125 GROM
€303.55
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: BPCL-7048
SKU: msx-10474 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2021-, ShopSpacer side stand, VFR750F gen 4, 94-97
€11.08
Spacer side stand, VFR750F gen 4, 94-97
Spacer, Side Stand, VFR750F Gen 4, ’94-’97
For use with:
EXPS-0119 Set, Pipe, Full Race System, VFR70R Gen.4, ’94-’97, (No Silencer)
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer
TYGA no: BPSY-0257
SKU: hon-11034 Categories: ALL products, exhaust system replacement parts, Exhausts, Honda, Shop, VFR750F Gen 4, 94-97Undertray (GRP), NC35 T13, Assy.
€74.57
This is the all GRP undertray used in the NC35 T13 style seat cowling kit BPFS-0118.
This product is suitable as a replacement in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC35.
To be used with
seat cowling BPFT-9118
subframe TYLY-0025
battery box TYLY-0026
taillight BPLT-0013
Indicators BPLT-0020L and BPLT-0020R
registration/license plate holder BPCX-9118/BPFX-9118
TYGA no: BPFX-9218
SKU: hon-10804 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35Turn signal relay LED , 1990 Honda
€18.19
Turn Signal Relay, Replacement for Honda 1990s Type.
Electronically speed controlled flasher relay especially designed to be used with LED turn signals. This unit will flash at the correct speed regardless of the wattage of the turn signals so it can be used with stock fronts and LED rears, all LEDs or even all stock.* Easy to install, plugs and plays where the stock Honda one is installed. Re-use the stock Honda rubber sheath for mounting it.
*For some Hondas such as the MC21, NC30 and NC35, this relay works fine with 2 LED turn signals installed or with all four of the stock turn signals installed. However, if 4 LED turn signals are installed, then you need to install one of the following in the wiring harness:
TYGA no: TELC-0002
SKU: hon-10580 Categories: ALL products, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R MC19, CBR250RR MC22, CBR400RR NC23, CBR400RR NC29, CBR900RR 1992- 95, Honda, NR750, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, RVF400RR NC35, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750R RC30, VTR1000Sp1SP2Bar end weight (pair), Honda CBR250RR MC22
€21.46
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-0322
SKU: hon-11468 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersKit complete body kit “street” with front fender GRP RC30 style, Honda VFR400 NC30
€1,073.55
This is the all GRP seat cowling used in the NC30 RC211V style seat cowling kits, BPFS-0028 and BPFS-0034.
This product is suitable as a replacement seat cowling in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC30.
To be used with:
subframe TYLY-0025
battery box TYLY-0026
taillight BPLT-0013
registration/license plate holder BPCX-9007
TYGA no: BPFS-0228
SKU: hon-11429 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, Shop, VFR400RR NC30