Silencer stainless round, WSS300 (race) system, KTM RC390
€384.78
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXSL-0174p
SKU: ktm-10144 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsScreen GP2010, TYGA RGV/RS/NSR
€52.00
Screen clear GP2010, TYGA RGV/RS/NSR
This screen fits the TYGA bodywork.
TYGA no: scre-0084-scre-0085
SKU: alg-10072-alg-10073 Categories: ALL products, Aprilia, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ22, RS250, SuzukiDecibel killer silencer stainless, moto maggot
€29.15
Spacer side stand, VFR750F gen 4, 94-97
Spacer, Side Stand, VFR750F Gen 4, ’94-’97
For use with:
EXPS-0119 Set, Pipe, Full Race System, VFR70R Gen.4, ’94-’97, (No Silencer)
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer
TYGA no: EXDK-0007
SKU: hon-11035 Categories: ALL products, exhaust system replacement parts, Exhausts, Honda, Shop, VFR750F Gen 4, 94-97Link rod Tyga step replacement, NSR150/250
€20.06
Tyga Step Kit Replacement Link Rod, Female, 240 mm.
Replacement gear link rod for your NSR150, MC21 or MC28 TYGA Step Kit. (STAA-0001 and STAA-0002)
Uses M6x1 thread in one end and M6x1 L/H thread in the other. 245mm in length.
TYGA no: STAR-0001
SKU: hon-10294 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, Honda, NSR150SP, NSR250 MC21, NSR250 MC28, ShopShim, Side Stand, Yamaha RD350LC (4L0)
€2.46
Shim, Side Stand, Yamaha RD350LC (4L0)
Use this shim on the inner side of the side stand mounting fork to reduce the slack from 37 years of wear.
When the stand mounting fork is worn, the spring pulls the stand in towards the centre of the bike and can interfere with the exhaust pipe.
Shim thickness = 0.5mm
TYGA no: BPSY-0209
SKU: yam-10069 Categories: ALL products, Exhausts, RD350LC 4L0, Stock list, all modelsKit, Fairing Set, Race, GRP, Stock Shape, VJ21
€700.54
Kit, Fairing Set, Race, GRP, Stock Shape, VJ21
Complete set of stock shaped bodywork for the Suzuki RGV250 VJ21
Consists of the following products ( also available seperatly)
BPFU-1019 Upper Fairing
BPFL-0019 Lower Fairing
BPFT-1019 Seat Cowling
BPFF-0019 Front Fender
SCRE-0120 Clear Screen
TYGA no: BPFS-0192
SKU: suz-10119 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ21, Suzuki, Suzuki RGV250Carbon radiator shrouds silver , Honda NSR250
€39.27
Radiator Shroud, Pair, Carbon, NSR250
TYGA no: BPSC-0011
SKU: hon-10410 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopCarb Service Kit A, 39 pieces, Honda CBR400RR NC23
€72.27
Carb Service Kit A, 39 pieces, Honda CBR400RR NC23
LiteTek Carburettor Seal Kit to suit
Honda CBR400RR NC23(G-H-J-K)
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-006 Float Bowl Ring, Material: Flourosilicone (Part of Honda Assembly Part No. 16010-MN4-003 superseded by 16010-MN4-305)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A (Part of Honda Assembly Part No. 16010-MN4-003 superseded by 16010-MN4-305)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel
4x OR-009 Drain Screw O-Ring, Material: Viton 70A (Part of Honda Assembly Part No. 16010-MN4-003 superseded by 16010-MN4-305)
6x OR-018 Vacuum Breather O-Ring, Material Viton 70A (The parts book lists the part number for the vacuum o-rings as being part of the kit 16040-MM5-601. However, that kit only contains the o-rings for the fuel tubes and float bowl breather tee pieces. Therefore, we have added these o-rings to the kit)
4x OR-011 Float Breather O Ring, Material: Viton 70A (Part of Honda Assembly Part No. 16040-MN4-003 superseded by 16040-MM5-601)
6x OR-016 Fuel O-Ring, Material: Viton 70A (Part of Honda Assembly Part No. 16040-MN4-003 superseded by 16040-MM5-60)
4x CS004 Choke Plunger Cap, Material: HNBR (Part of Honda Assembly Part No. 16046-KT8-003 or 16046-KY2-711)
3x SC-008 Throttle Synch Screws, Material: Stainless Steel
TYGA no: CKA-Honda-NC23
SKU: alg-10357 Categories: ALL products, Carburettor Service Kits,, CBR400RR NC23, Honda