Carbon seat cowling, stock shape, NXA RS250R (2001- ’08)
€908.01
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Carbon passenger seat cover, Ducati monster 696/795/796/1100
€167.82
Passenger Seat Cover, (Carbon), Ducati Monster
Carbon tank filler cap cover Honda, CBR600 en CBR1000
€35.23
Carbon Tank Filler cap Cover. Fits most Honda sports bikes including:
MC18, MC21, MC22, MC28
NC23, NC29, NC30, NC35
Most other modern sports bikes such as CBR600, and CBR900, 1000 and 1100XX models
TYGA no: BPCC-0002
SKU: hon-10009 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR250R MC19, CBR250RR MC22, CBR400RR NC23, CBR400RR NC29, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RVF400RR NC35, Shop, VFR400RR NC30, VTR1000Sp1SP2Carbon exhaust guard TYGA, Yamaha R25 – R3
€63.97
Exhaust Guard, TYGA Slip On, Yamaha R25/R3
Made from specially formulated high temperature resin, this exhaust guard adds the finishing touches to the TYGA Performance slip-on exhaust transformation. Fits in minutes and adds a factory GP touch to your bike.
Note, this product is only suitable when used with TYGA Performance R25 and R3 slip-on exhaust systems EXPS-0059 and EXPS-0060
Spring puller (type 2), universal
€21.68
Handy, tough, spring puller ideal for removal of exhaust mounting springs in those difficult to get places. Say goodbye to slipping vice grips and twisted strands of wire.
Also gives your race pit a professional edge for that psychological advantage over the competition!
We have 2 type’s, also see product alg-10009.
A must for every workshop!!
TYGA no: puller1
SKU: alg-10239p Categories: 2 stroke exhaust sets, 4 stroke exhaust sets, ALL products, By product, Cagiva, Exhausts, Exhausts, Honda, Mito 125, Monkey 125 2018-, MSX125 2013 - 2015, MSX125SF 2016 -2020, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, Shop, Suzuki, Tools, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, Yamaha, YZ250 2005-15Clutch/brake mount clamp, Honda MSX125 GROM
€13.47 – €13.48
Clutch/Brake Mount Clamp), Bikers. Light weight and good looking. Anodised for a long lasting finish. Available in a variety of other colours. See photos.
This clamp is a direct replacement to the top nut on many Honda machines, such as MSX125, CBR250R MC18~28, MC19, MC22, NC23, NC29, NC30, NC35 etc
TYGA no: H052-A8Z1-0039BLACK
SKU: msx-10165- Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020Lock washer clutch, RGV250/RS250
€3.49
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Rear axle Wheel, MSX/ Monkey
€20.41
Rear axle Wheel, MSX/ Monkey
TYGA no: 42301-K26-900
SKU: msx-10252 Categories: ALL products, Honda, Monkey 125 2018-, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, OEM parts, OEM parts, Shop, Various parts, Various parts, Various parts