Steering stopper, KTM RC390
€19.17
Steering Stopper, KTM RC390
Designed and manufactured in house by TYGA Performance, this stainless steel steering stopper restricts the amount of steering angle on the KTM RC series. Ideal for racing and preventing smashed thumbs from ‘tank slappers’. Installs in minutes. No special tools or dismantling of the bike required.
Fitting Instructions: BPSY-0159 Steering Stopper, KTM RC390
1) Remove 2x M3 bolts and spring washers, and remove the top plate
2) Remove cover from 3M double sided tape
3) Lift the steering stopper into position to wrap around the standard
steering stopper on the frame. It should hold itself in place with the tape
4) Refit cover, M3 screws and washers and tighten the screws securely.
5) Go racing!!
TYGA no: BPSY-0159
SKU: ktm-10052 Categories: ALL products, KTM, RC 390, Shop, Universal parts, Various partsBelly pan (GRP) Black, Honda MSX125 GROM
€225.09
<p>Belly Pan, (GRP), MSX125, painted asteroid black metallic to match your bike. Bling up your grom with this cool component. Enclosed bottom makes this product suitable for race regulations requiring fluid retention capability.</p>
<p>High quality mounting hardware provided and easy to install.</p>
<p>We also offer the same product with carbon, see BPCL-7228 mounted on bike in photos.</p>
<p>Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.</p>
<p> </p>
<p><a href="{{media url="wysiwyg/01-belly-pan-fitting-bpfl-bpcl-7128-online-hl-d42c3f6e.pdf"}}" target="_self">Click here for PDF</a></p>
TYGA no: Â BPFL-7128 BÂ
SKU: MSX-10186 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopHandlebar Clamp, Right, Silver, Ninja250/300R
€113.75
Replacement Right handlebar clamp for handlebar set TYLY-0869
Carbon meter cover black, MC21/MC22/NC35/NC29/SC28
€40.76
Carbon Meter Cover MC21, MC22, NC35, NC29, SC28
Attractive carbon cover for MC21 meter assembly.
For fitment, simply remove adhesive backing and pop it on over the three foam retaining buttons.
Fits?Honda models as follows: CBR900RRN/RRP/RRR, RVF400 NC35, CBR400 NC29, CBR250 MC22.
TYGA no: BPCC-0004
SKU: hon-10377 Categories: ALL products, Bodywork and carbon, Carbon, CBR400RR NC29, CBR900RR 1992- 95, Honda, NSR125 JC22 1994 - 2003, NSR250 MC21, RVF400RR NC35, Shop, Various parts, Various partsLower Cowling (Carbon), NC35, Stock Shape
€631.04
Stock shaped one piece lower in carbon conprising what is left right and lower part of inner cowling on OEM panels. Compatible with our stock shaped NC35 carbon upper. See also BPFS-0065, BPFS-0066, BPFS-0067 and BPFS-0068 for savings.
PLEASE ALLOW TWO WEEKS BEFORE SHIPPING. PARTS ARE MADE TO ORDER
TYGA no: BPCL-0103
SKU: hon-10841 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35Set, pipe full race system round aluminium/carbon end cap silencer LH exit, VFR750F gen 4, 94-97
€1,155.39
Set, pipe full race system round aluminium/carbon end cap silencer, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system can be used with a number of our 2″ slip on exhaust silencers
See also our sets with silencer included:
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand, however, the centre stand and pillion foot rests must be removed prior to installation.
TYGA no: EXPS-0127
SKU: hon-11020 Categories: ALL products, Exhaust systems, Exhaust systems, Exhausts, Honda, RC36-2 -> RC30 replica products, Shop, VFR750F Gen 4, 94-97Fairing set street GP-T, Honda VFR400 NC30
€1,054.33
The ultimate faring set for your Honda VFR400 NC30!!
This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NC30. As well as bringing the NC30 up to date, it also offers a useful weight saving and easy fitment and removal. The kit is supplied with all mounting hardware including carbon fiber side stays and aluminium upper and front stays. The headlights used in this kit, are LED and consist of two units either side with 2 on low and 4 on high beam. The system uses a lot less current than conventional halogen systems while at the same time being discrete but stylish. Please note that the headlights do not comply with road use regulations and are unsuitable for high speed riding on unlit roads.
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
As well as this fairing BPFS-0144 which is made of GRP (glass reinforced plastic) which is primed and ready for paint**, we offer a similar product using carbon fiber panels finished in high gloss UV protective clearcoat. See BPFS-0146
* A clear screen is provided unless you specify tinted in the comment box at check out.
** We recommend trial fitting and making and minor adjustments before painting
TYGA no: BPFS-0144
SKU: hon-10579 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, VFR400RR NC30lower cowling (GRP), stock shape NSR250 MC21/MC28
€241.47
Lower Cowling (GRP), NSR250, MC21/28, Stock Shape, Assy
This part is a direct replacement for the OEM Honda left, right lower, right mid and inner cowls and has the ‘shark fin’ and front ducts retained. Compatible with stock and Tyga exhaust systems.
Compatible Parts:
Can be used with the following upper cowlings: MC21 and MC28 OEM upper cowling, Tyga upper cowlings: BPFU-0001, BPFU-0002, BPFU-0003, BPFU-0006, BPFU-0007, BPFU-0008 and BPFU-0022
See also
BPFL-0001 for similar product
TYGA no: BPFL-9001
SKU: hon-10915 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28