Handlebar Clamp, Left, Black, 48 mm.
€98.58
Handlebar Clamp, Left, Black, 48 mm.
Replacement Left handlebar clamp for handlebar set TYLY-1012
Bodywork Set 2, GRP, Painted RC36-2 RC30 Style, Race
€4,231.40 €4,019.83
Bodywork Set 1, GRP, Painted RC30, RC36-2 RC30 Style, Street
Due to high demand, please allow 1-2 months after placing your order for the painted parts to be ready
SPECIAL INTRODUCTORY PRICE FOR PAINTED KIT
Consist of:
- BPFU-7049 Upper Cowling, GRP, RC36, RC30 Style, Street
- SCRE-0182 Screen, RC36-2, RC30 Style, Street
- BPFL-7049 Lower Cowling, GRP, RC36, RC30 Style, Street
- TYBP-0006 Hardware, Cowling, GRP, RC36, RC30 Style, Street
- BPFT-7049 Seat Cowling, GRP, RC36, Single, RC30 Style, Street
- TYLY-0314 Subframe Set, RC36-2, RC30 Style, Street
- BPFG-0009 Fuel Tank, GRP, VFR750 R36-2, RC30 Style, Unpainted
- TYBP-0009 Fitting Kit for Fuel Tank, RC36-2, RC30 Style
- TYLY-0318 Fuel Tap Extension, RC36-2, RC30 Style
- TYLY-0305 Upper/Mirror Stay, 40mm, RC36, RC30 Style
- TYLY-0317 Meter Stay, RC36-2, RC30 Style
- BPFC-7049 Frame In-Fill Panel, GRP, Pair, RC36-2, RC30 Style
- TPER-0113 Steering Stopper, Honda VFR750R RC36 (94-97)
- 16956-MT4-000 Fuel Hose, RC36/1
- BPSP-0012 Bum Stop, RC30 Style, Replacement
- BPSP-0013 Seat Pad, RC30 Style, Replacement
- TYPP-0036 Lock Assy. RC36-2, RC30 Style.
- BPAC-0015 Set Windscreen Molding and Clips
- TYPA-0025 Paintwork, RC30 Scheme
Choose between 40mm (default) and 30 mm mirror pitch
Note: All parts used for the RC36-2 RC30 replica can be ordered individually. Please see here for the complete parts list, click on images below to open product page for that particular component for more information and photos.
40mm pitch mirror version is provided unless you specify 30mm in the comment box at check out
TYGA no: BPFS-0241
SKU: hon-11531 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, StocklistSection final stainless “RH exit, VFR750F gen 3 and 4, 90-97
€116.77
Section, Final, R.H Exit, Stainless, VFR750F Gen 4, ’94-’97:
Used on: Right Hand Exit Full Race Systems, VFR750R, Gen 4
EXPS-0131 Set, Pipe, Full Race System, R.H Exit, VFR750F, Gen 4, ’94-‘9, (No Silencer)
EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer, VFR750F, Gen 4, ’94-’97
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer, VFR750F, Gen 4, ’94-’97
EXPS-0134 Set, Pipe, R.H Exit, Full Race System, Oval Carbon/Carbon End Cap Silencer, VFR750F, Gen 4, ’94-’97
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer, VFR750F, Gen 4, ’94-’97
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer, VFR750F, Gen 4, ’94-’97
TYGA no: EXPT-9119
SKU: hon-11038 Categories: ALL products, exhaust system replacement parts, Exhausts, Honda, Shop, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97Carbon hugger, Ducati monster 696/795
€159.41
Hugger, (Carbon), Ducati Monster, 696, 795
Powervalve cover Gold, Suzuki RG125
€60.74
set ( 4 pieces), complete CNC billet aluminium powervalves, RGV250/RS250 (alg-10123)
This set of Power valves is the latest version, and can be used for your Suzuki RGV250 or Aprilia RS250. Fully tested on Dyno and used on track and street bikes.
The set is made of CNC billet aluminium and is special coated.
No more problems with the “power valve pin” and having to buy new ones every 15.000 km.
And the risk that a broken power valve will ruin your engine!!
Now available for an unbeatable price, and FREE SHIPPING all over Europe.
TYGA no: TYLY-7039
SKU: alg-10439 Categories: ALL products, High performance, RG125, Shop, Suzuki Tags: and can be used for your Suzuki RGV250 or Aprilia RS250. Fully tested on Dyno and used on track and street bikes., And the risk that a broken power valve will ruin your engine!!, Best available in the market., No more problems with the “power valve pin” and having to buy new ones every 15.000 km., The set is made of CNC billet aluminium and is special coated., This set of Power valves is the latest versionTriple clamp set CNC black, Suzuki SV650
€573.36
CNC machined TYGA triple clamp set for your RGV250 VJ22.
These stylish, all aluminium triple clamps are a direct replacement for the OEM VJ22 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered without seals and bearings, but include an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy. Weights 1800 gram.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
Update your RGV250 with these light, strong and cool triple clamp set.
Carbon engine cover right, ninja 400 2018 –
€144.93
Engine Cover, (Carbon), Right, Ninja 400, 2018-
This engine protective cover is made from lightweight carbon with an abrasion resistant inner layer of Kevlar. Now requirement for many racing classes and a sensible and attractive addition to a road bike.
See also: BPCC-7140L and BPCC-7014 (set with left and right cover)
TYGA no: BPCC-7140R
SKU: kaw-10129 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-Triple clamp set CNC black, Honda NSR250 -> RVF400 fork
€673.59
Triple Clamp Set, CNC Black, NSR250 MC18 (1988/89) To Fit RVF400 Forks
CNC machined TYGA triple clamp set for the MC18 to take NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1247
SKU: hon-10703 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC18