Carbon lower cowling GP-T, Honda NSR250 MC21/MC28
€509.98
Lower Cowling (Carbon), NSR250 GP-T, Assy.
This product is designed to be used with BPCU-9033 as part of the Bodywork set BPFS-0138
Designed in-house by TYGA Perforance and using 15 years experience of developing fairings for the NSR250, this fairing is lightest and most stylish yet. The design allows for the extra width of an HRC radiator while at the same gives maximum clearance with the track at high angles of lean. Other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is under 1 kg but strength retained using high strength epoxy resins and good design. Also available in GRP, see BPFL-9033
It is supplied with spacers to place between fairing and rear lower mounts to ensure clearance with exhaust chambers.
Compatible products:
This product must be used with BPCU-9033
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with chambers:
1. stock systems, fit with no spacing but will need a small part of the indent on the lower vent removed to clear the chamber. We can modify the lower to fit the stock chambers if requested
2. Tyga chambers require some spacing but no cutting. On some systems (particularly MC28) no spacing is necessary
3. Other systems, can not advise, but should require only spacing or possibly cutting of front of lower where front cylinder header exits.
TYGA no: BPCL-9033
SKU: hon-10541 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, NSR250 MC21, NSR250 MC28, ShopSteering Stem Conversion Kit, NSR/RS
€128.69
This conversion kit includes the parts you need to convert the complete USD front end from a Honda RS250 NF5/NX5/NA5 to fit the NSR250 MC21/28.
Parts included:
Steering Stem
Top Clamp Collar
Top Nut (TYLY-0027)
Steering Stopper bushes and bolts
To fit the parts you will need to press the RS stem out of the RS lower clamp. Remove the clip from the bottom of the RS shaft and re-fit this to the conversion shaft. Then press back into the RS lower clamp.
The top clamp collar is a press fit into the top clamp, from the top side. this resizes the top clamp to fit the conversion shaft.
Headstock bearings are OEM NSR items, or TYGA taper roller. These must be purchased separately.
The final attack is fitting the steering stoppers. To locate these, loosly fit the converted headstock to the NSR and then turn your steering to left and right, marking the location of the steering stopper positions to give you just enough clearance for no interference with radiator etc. Check and double check position, then drill (dia. 6.8mm) and tap to M8. Use the supplied M8 bolts to secure.
You can now fit the rest of your front end with ease.
TYGA no: TPER-0027
SKU: hon-10836 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250, NSR250 MC21, NSR250 MC28, Stock list, all modelsMeterstay aluminium, Honda VFR400 NC30
€211.86
Direct replacement of the stock item. Fabricated from aluminium alloy, this Tyga Lyte product weighs approx. 200g. and can be used with all other NC30 components and fairings.
Beautiful, perfect fitment and give your bike that HRC look.
TYGA no: TYLY-0016
SKU: hon-10416 Categories: ALL products, Bodywork, Honda, Shop, Various parts, VFR400RR NC30Passenger seat cover Black, Honda MSX125 GROM
€187.90
Passenger Seat Cover, (GRP), MSX125 Grom.
This is the GRP version of our MSX125 passenger seat cowling in asteroid black as shown in the main photo. Note some other photos show different colours so please be careful when making your selection.
Easy installation, with mounting hardware and trim supplied, this stylish cover will clean up the lines of your bike and make your bike stand out from the crowd.
This seat cowling is also available as BPCX-7128 in carbon fibre. See website for more details.
<a href= {{media url= wysiwyg/02-fitting-manual-seat-cover-bpfx-cx-7128-online-72148956.pdf }} target= _self >Click here for PDF</a>
TYGA no: BPFX-7128 B
SKU: MSX-10146 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopCarbon set, Yamaha R1 2009-14
€458.68
Carbon set, Yamaha R1 2009-10
A set contains:
Front fender
Rear Hugger
Chain guard
Direct replacement for original Yamaha part
Buy a complete set and it saves you money.
PLEASE NOTE: all ” TYGA” logo stickers on the carbon products can be easily removed because it is applied last above the clearcoat finish.
TYGA no: BPFS-0089
SKU: yam-10001 Categories: ALL products, Carbon, Shop, Yamaha, YZF-1000 R1 2009- 14Meter Stay, NC35 T13 Cowling Type, Assy.
€86.26
Lightweight laser cut steel stay designed specifically to mount the T13 style fairings BPFU-9218, BPCU-9218 and retains stock instrument cluster for the NC35.
Do not use with other model fairings.
Compatible with:
TYGA T13 kits for the NC35
TYGA no: TYLY-2018
SKU: hon-10820 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35Carbon front fender, Kawasakit ZXR250/300 2013-
€187.52
Carbon direct replacement for OEM Kawasaki item. Pre drilled for easy fitting. Compatible with:
2013- Ninja 250
2013- Z250
2013- Ninja 300
2013- Z300
TYGA no: BPCF-7032
SKU: kaw-10033 Categories: ALL products, Carbon, Kawasaki, Ninja 250R/300R 2013 -, ShopCarbon endcap for MSX/RC silencer
€47.22
This is a replacement part. When ordering an exhaust system, this item is included in the price and you do not need to order this parts separately.
Carbon endcap for MSX/RC silencer