Seal, Headstock Lower
€25.62
Seal, Headstock Lower
TYGA no: 53214-371-010
SKU: hon-11142 Categories: ALL products, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28Pillion seat cover “carbon”, KTM RC390 2022 –
€177.68
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPCX-7731
SKU: ktm-10209 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all modelsFront fender RC211V, NC35
€71.75
Attaches to the original NC35 RVF400 mounting points and can be used with all Tyga and Honda bodywork
Compatible Parts:
All Tyga Performance and Honda OEM panel
TYGA no: BPFF-9005
SKU: hon-10124 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, ShopKit, Complete Body Set, Stock Shape, with Seat Cover, NC30, Painted Type 1
€1,643.89
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPFS-0218
SKU: hon-11403 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30TYGA bike dust cover black red Aprilia
€63.10
Specially made for your Aprilia.
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
TYGA no: TMER-0052
SKU: apr-10085 Categories: ALL products, Aprilia, Bike covers, Merchandise, RS125, RS250, RSV125, Shop, Universal parts, Various parts, Various parts, Various partsSeat set street GRP GP-T, Honda NSR250 MC21
€846.53
Kit, Seat Set, GRP (Street), MC21 GP-T
This set of bodywork is designed to replace the stock seat cowling with the race version of our GP-T Race Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC21 but also an MC28 fitted with an MC21 fuel tank. The kit comprises parts shown below which are also available separately.
Note there are 4 MC21 GT-T seat cowling kits to choose from:
BPFS-0129 Street GRP
BPFS-0130 Race GRP
BPFS-0131 Street Carbon
BPFS-0132 Race Carbon
TYGA no: BPFS-0129
SKU: hon-10456 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, ShopFront fork adjuster 14mm
€32.91
Front fork Pre-load adjuster. suitable for adjuster with 14 mm oval type fitment, for example:
Make Model from year to year
Honda NSR250 1988 1997
Honda VFR400R 1989 1993
Honda CB 1300 2003 2009
Honda CB 1300 S 2005 2013
Honda CBR 600 F 2001 2007
Honda CBR 600 F Sport 2001 2002
Honda CBR 600 RR 2003 2004
Honda CBR 900 RR Fireblade 1992 1999
Honda Hornet 900 2002 2005
Honda VTR 1000 F Firestorm 1997 2006
Suzuki GSX-R 600 1997 2003
Triumph Daytona 1200 1993 1997
Triumph Daytona 900 1993 1996
Triumph Daytona 955i 1999 2006
Triumph Daytona T595 (955i) 1997 1998
Triumph Speed Triple 2003 2004
Triumph TT 600 2000 2003
TYGA no: TYLY-1110 - TYLY-4110
SKU: alg-10149 - alg-10151 Categories: ALL products, CBR600RR 2003- 4, CBR900RR 1992- 95, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Clutch Damper Rubber, MC28SP
€9.82
Clutch Damper Rubber, MC28SP
TYGA no: 22203-KV3-780
SKU: hon-11154 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28