Carbon fuel tank (early type), Honda RS250R NX5
€1,444.49
Fuel Tank, Carbon, RS250R NX5 (Early Type)
Top quality reproduction of the early non ram air version NX5 fuel tank in carbon fiber.
Finished in high quality UV resistant clear-coat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel, Avgas 100LL to E85 (85% ethanol). Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light ( 2.25 kg) Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts and following the stock shape, the following stock parts can be used (not included):
Fuel Cock
Breather
Front strap
Stock mounting rubbers
Filler cap and seal
IMPORTANT: Please note that this fuel tank, for ease of manufacture, uses the later flush fitting NX5 type filler cap. This can be purchased from HRC (part numbers 17521-NX4-680 for filler cap and 17515-NX5-770 for seal) or we can supply our own TYGA version (Cap: TYLY-0178A, Seal: BPSY-0238) Note the filler cap and the above list of parts are not included with the fuel tank and needs to be purchased separately.
TYGA no: BPCG-0003
SKU: hon-10946 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopSub-frame, Aprilia RS250 (Tyga)
€156.77
his subframe is a replacement for the stock Aprilia item and to be used in our TYGA seat cowling kits BPFS-0102 and BPFS-0103 etc. and bolts up to the 1998-2006 frame without need for modifying any components. It will not fit the stock Aprilia seat cowling.
The subframe is supplied with all the fasteners needed to mount the various components that are housed under the seat cowling and incorporates a battery tray. This product is made in steel but is light without compromising strength. Not to be used on a motorcycle carrying a passenger and rider.
TYGA no: TYLY-0065
SKU: apr-10038 Categories: ALL products, Aprilia, Bodykit replacement parts, Bodywork, RS250, ShopSeat set street GRP GP-T, Honda RVF400 NC35
€1,078.75
The ultimate seat set for your V4 Honda!
This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NC35. As well as bringing the NC35 up to date, it also offers huge weight saving and easy fitment and removal. The seating position is higher and roomier compared to the stock NC35 postition, bringing it into line with modern sports bikes ergonomics. The seat pad is designed to give plenty of feedback for race use and the cowling has plenty of space for tucking in behind the fairing along the straights. The seat cowling is designed so that the fuel tank can be removed while leaving the seat cowling installed, allowing for quick jetting changes etc.
The kit is supplied with all mounting hardware including subframe and battery box. The taillight used in this kit, is LED and may not comply with road use regulations in some territories,( though we have not heard of any issues after selling them worldwide for ten years).
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
As well as this seat cowlng set BPFS-0149 which is made using GRP (glass reinforced plastic) which is primed and ready for paint
** we offer a similar product using carbon fiber panels finished in high gloss UV protective clearcoat. See BPFS-0151
** We recommend trial fitting and making and minor adjustments before painting
TYGA no: BPFS-0149
SKU: hon-10582 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35Tyga Step Kit Replacement Left Side Hanger, Aprilia RS-125, Assy.
€77.07
Replacement left hanger for your Aprilia RS-125 TYGA Step Kit. Complete with mounting hardware and bushes.
TYGA no: STAH-0021
SKU: apr-10091 Categories: ALL products, CNC parts, CNC parts, RS125, Stock list, all modelsCarbon rear hugger,Honda CBR250 2011 – CBR300 2014
€236.91
This lightweight carbon version of the stock hugger will enhance the beauty of your CBR as well as reduce unsprung weight.
TYGA no: BPCH-7208
SKU: hon-10183 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, CBR250R 2011 - 15, CBR300R 2014-, Honda, ShopSide cover left flat black, Honda MSX125 GROM
€39.31
Side cover flat black, OEM Honda part
TYGA no: 83540-K26-900ZF
SKU: MSX-10322 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopCarbon front fender Dax German
€230.75
Front Fender, (Carbon) German type, Honda Dax. Carbon direct replacement for original part. Lighter and looks way, way cooler!
TYGA no: BPCF-7037
SKU: MKY-007 Categories: ALL products, By model, By product, Carbon, Dax and Chaly, Honda, ShopIndicator, Front, Right, Ninja 250R/300R 2013 -18
€44.37
Indicator, Front, Right, Ninja 250R/300R 2013 -18
TYGA no: 23040-0108
SKU: kaw-10167 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R/300R 2013 -, Shop