Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Bodykit complete MiniRacerXtreme, Honda MSX125 GROM

1,540.86

(1,864.44 inc. VAT )

Bodywork Set, (GRP), MRX, MSX125 GromThis kit is the ultimate modification for your MSX125 Grom converting it to a mini racer for the road or track depending on how the mood takes you. The kit is comprehensive and is supplied with all mounting hardware and components including, headlight, handlebars, top triple clamp and mirrors*.The panels are made from high quality GRP using high quality epoxy resins for strength and lightness and are primed ready to apply paint. The shape lends itself to most liveries and ideal for promoting your business or race team.With improved ergonomic and aerodynamic performance, this kit will increase top speed and agility as well as give a whole new riding experience for the MSX125 Grom. Ideal for buddying road racers for honing racecraft and riding skills, or just a fun project to stand out from the crowd, the MRX will put a smile on everyone’s face.*Note, turn signal indicators, tail tidy, front fender are not included with kit but are available on this site. We recommend installation of rear sets and exhausts but they are not strictly necessay.Our MRX set only fits the first model MSX 2013-16<iframe width= 560 height= 315 src= https://www.youtube.com/embed/8eiU-sMhpRI frameborder= 0 allowfullscreen></iframe>

TYGA no: BPFS-0127

SKU: MSX-10276 Categories: , , , ,
Read more

Cover headlight upper cowling (pair) yellow, Honda VFR400 – RVF400

27.34

(33.08 inc. VAT )

Cover, (yellow), pair, Headlight, Upper Cowling, Endurance

To be used on the TYGA Endurance Fairings for NC30/35

Read more

Triple clamp set CNC black, Honda NSR250 -> RVF400 fork

673.59

(815.04 inc. VAT )

Triple Clamp Set, CNC Black, NSR250 MC18 (1988/89) To Fit RVF400 Forks

CNC machined TYGA triple clamp set for the MC18 to take NC35 forks.

Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.

They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.

The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.

Tightening recommendations:

Lower clamp pinch bolts: 23Nm.

Top clamp pinch bolts: 23Nm.

TYGA no: TYLY-1247

SKU: hon-10703 Categories: , , , , ,
Read more

Power jet #0, for NSR250 MC18/21/28

8.44

(10.21 inc. VAT )

Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970

Use this jet to blank of the power jet circuit in NSR250 carbs.

Read more

Carbon set, Yamaha R1 2009-14

458.68

(555.00 inc. VAT )

Carbon set, Yamaha R1 2009-10

A set contains:

Front fender

Rear Hugger

Chain guard

Direct replacement for original Yamaha part

Buy a complete set and it saves you money.

PLEASE NOTE: all ” TYGA” logo stickers on the carbon products can be easily removed because it is applied last above the clearcoat finish.

TYGA no: BPFS-0089

SKU: yam-10001 Categories: , , , ,
Read more

Carb Service Kit B, 19 pieces, Honda CBR400RR NC29

31.32

(37.90 inc. VAT )

Carb Service Kit B, 19 pieces, Honda CBR400RR NC29

LiteTek Carburettor Seal Kit to suit
Honda CBR400RR NC29
Made from long lasting, ethanol resistant elastomers and Viton®

Consist of the following items:

2x OR-019 Vacuum O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No.16040-MN4-003 superseded by 16040-MM5-601)
6x OR-016 Fuel O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16040-MN4-000)
4x OR-014 Float Breather O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No.16040-MN4-003 superseded by 16040-MM5-601)
4x CS-005 Choke PLunger Cap, Material: HNBR, (Part of Honda Assembly Part No. 16046-KT8-003)
3x SC-008 Throttle Synch Screws, Material: Stainless Steel

Please also see Honda CBR400RR NC29 Carb Service Kit A, 20 pieces.

TYGA no: CKB-Honda-NC29

SKU: alg-10355 Categories: , , ,
Read more

Under cowling (GRP) Black, Honda MSX125 GROM

182.13

(220.38 inc. VAT )

Under Cowl, (GRP), MSX125, painted asteroid black metallic to match your bike. Bling up your grom with this cool component. High quality mounting hardware provided and easy to install. We also offer the same product in Carbon, see BPCL-7028.

Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.

Read more