Exhaust Hanger, Aluminium, Ninja 400
€49.83
Exhaust Hanger, Aluminium, Ninja 400
Lightweight hand welded aluminium racing exhaust stay, this product is a direct replacement for stock passenger foot peg hanger and ideal for any race bike or custom project. The exhaust stay is supplied with a removable bracket to mount the rear brake reservoir.
Compatible with the following TYGA silencers and Slip-On sets:
EXSL-0071
EXSL-0072
EXPS-0100
EXPS-0101
TYGA no: TYLY-0213
SKU: kaw-10098 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Kawasaki, Ninja 400R 2018-Carbon tankshields set, Honda CBR600 2005-6
€270.91
These high quality carbon parts replace the cheap looking plastic original parts supplied by Honda
Rear sprocket aluminium gold, Suzuki RGV250
€67.41
Upgrade your bike with TYGA Sprockets.
Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.
TYGA no: TYSR-0105-40T - TYSR-0105-48T
SKU: suz-10071 - suz-10081 Categories: ALL products, By product, CNC parts, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, Sprockets, Suzuki, Various parts, Various partsTriple Clamp Set, 3D, CNC Silver, NC35 Forks to fit MC21/MC28
€673.59
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3305
SKU: hon-11270 Categories: 4 stroke exhaust sets, ALL products, CNC parts, CNC parts, Exhausts, Honda, NSR250 MC21, NSR250 MC28, Shop, SilencersCarbon chain guard, Yamaha YZF-R125 2009 –
€117.41
Chain Guard (Carbon), Yamaha YZF-R125 2009-2014
Direct replacement from original Yamaha part
Section, Final, Stainless, CBR250/300R
€103.08
Section, Final, Stainless, CBR250/300R
TYGA no: EXPT-0116
SKU: hon-10797 Categories: ALL products, By product, Exhausts, Stock list, all modelsSide mount lower cowling, Honda VFR400 NC30
€9.04
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPSY-0323
SKU: hon-11390 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, Shop, Various parts, VFR400RR NC30