key holder CNC silver, Honda NSR150
€121.39
Ignition Switch Holder, CNC Silver, NSR150SP
This is a removable ignition switch/lock holder for our NSR150SP top triple clamp. Can be ordered as part of a triple clamp set or by itself or to fit to our TYGA triple clamps.
TYGA no: TYLY-0151
SKU: hon-10284 Categories: ALL products, CNC parts, CNC parts, Honda, NSR150SP, ShopFairing set race RC211V, CBR400RR
€1,086.59
This set of bodywork comprises of the parts shown in the picture which are also available separately.
A clear screen is provided unless you specify tinted in the comment box at check out This kit is supplied with all additional fasteners required to mount it to a stock NC29.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Please also look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
Handlebar Clamp, Left, Black, CBR250R
€92.83
Replacement left handlebar clamp for handlebar set TYLY-1469
Set full race system under belly with long stainless silencer with carbon cap, Honda MSX125SF GROM
€480.85
Set, Pipe, Full System, Underbelly, MSX125 Grom, Carbon Oval/Carbon End Cap, Long
This full race system has been specifically designed for the MSX125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! (DB killer included)
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0064) with no other changes to the stock bike.
A useful increase in peak power and further gains could probably be had with remapping etc.
Similar Products:
Please also see:
EXPS-0068 Stainless, Underbelly, with short silencer
<iframe width= 560 height= 315 src= https://www.youtube.com/embed/mSTQKSWArE0 frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0064
SKU: MSX-10349 Categories: ALL products, Exhausts, Exhausts, Exhausts, Honda, MSX125 2013 - 2015, MSX125 2021-, MSX125SF 2016 -2020, ShopHandlebar set 41 mm, silver
€216.82
Designed and machined in house from aircraft grade aluminium, suitable for most sports bikes with 41 mm. right way up front suspension see chart below for examples.
7 degree angle for a comfortable, yet sporty feel.
BMW Strada
Honda CB-1 89-90
Honda CBR1000F 93-96
Honda CBR400 NC23/29
Honda CBR600F2
Honda CBR600F3
Honda Hawk 650 RC31
Honda NSR250 MC18/21/28
Honda VFR400 NC30
Honda VFR750 90-97
Honda VTR1000 98-02
Kawasaki EX650R 06-09
Kawasaki ZX10 88-90
Kawasaki ZX6E
Kawasaki ZX6R 95-97
Suzuki GSF400/600 Bandit
Suzuki GSXF600/750/1100 Katana
Suzuki GSXR750/1100 86-87
Suzuki RGV250 VJ21
Suzuki SV650 99-09
Yamaha FZR750
Yamaha YZF600 94-95
Please note that these bars may have clearance issues with components when used on street bike and are primarily sold for race use.
TYGA no: TYLY-0077
SKU: alg-10088 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, Shop, Various parts, VFR400RR NC30Side Cowling, Left, Race, Carbon Clearcoated, KTM RC390 WSS300
€454.95
Side Cowling, left, Race, Carbon Clearcoated KTM RC390 WSS300
Replacement Side Cowling, Left, GRP, Race, WSS300, MUST be used with KTM WSS300 hardware
see also:
BPFU-7331R (GRP)
BPCU-7331UR (Carbon Unpolished)
Seat pad, curved
€46.69
Vinyl covered medium density foam race seat pad provides a maximum amount of feedback from the bike and minimum comfort!
Underside of seat has velcro stitched in. Kit is supplied with a strip of Velcro with strong 3M adhesive tape appied on the underside. Easy installment. Cut the strip to size using scissors, one each side recommended. Then simply peel back the protective layer on the adhesive strip, lay the strips on the seat cowling and place the seat pad in position.
Compatible Parts:
Tyga Tail cowling: BPFT-9002, BPFT-9012, BPFT-9102 and BPFT-9112
TYGA no: BPSP-0001AÂ
SKU: alg-10080 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopStay, 2T Oil Tank, Carbon, NSR250 MC21/MC28
€35.12
Stay, 2T Oil Tank, Carbon, NSR250 MC21/MC28
This lightweight carbon 2T oil tank stay replaces the stock item that the bike is supplied with (Honda OE part nr: 35112-KV3-830)
Fits:
Honda NSR250 MC21
Honda NSR250 MC28
TYGA no: BPCC-0064
SKU: hon-11209 Categories: ALL products, Honda, NSR250, NSR250 MC21, NSR250 MC28, Various parts, Various parts