Screen RC211V, Tyga CBR/VFR/RVF
€52.00
Screen RC211V, Tyga CBR/VFR/RVF
This screen fits the TYGA bodywork.
Upper/meter stay, Race, KTM RC125/200/390
€235.99
Upper/meter stay, Race, KTM RC125/200/390
This lightweight all aluminium upper cowling/meter stay replaces the heavy cast one supplied with the bike and weighs only a third of the original.
It is designed to be strong but minimal and supports both the fairing and instrument securely while saving 1 kg/2.2 pounds in weight. In addition to the weight saving, it is very easy to install and in the event of an accident, easy to repair. It has rubber mountings to support the instrument cluster and can be installed in a matter of minutes. Please note this is for circuit use only and can be installed with either stock KTM bodywork or TYGA Performance race bod
TYGA no: TYLY-0158
SKU: ktm-10086 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, CNC parts, KTM, RC 125/200, RC 390, Various parts, Various partsFrame Cover, Left, (Carbon) Honda NSR250 MC21/MC28
€179.12
This lightweight carbon cover fit over the frame and it is designed to protect against scratches and damage to the frame in the event of an accident.
TYGA no: BPCC-9312L
SKU: hon-10717 Categories: ALL products, Bodykit replacement parts, Bodykit replacement partsCarbon heel guards curved right , universal
€44.37
Right side carbon fibre heel guard. This heel guard curves inboard more than BPCC-9010R
TYGA no: BPCC-9210R
SKU: alg-10274 Categories: ALL products, By model, By product, Carbon, Honda, NSR125 JC22 1994 - 2003, NSR150SP, RS250R NF5 / NX5, Shop, Various partsSeal, Blank, Kickstart, MC28
€8.77
Seal, Blank, Kickstart, MC28
TYGA no: 90871-733-003
SKU: hon-11122 Categories: ALL products, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC28Handle bar set, Honda RS250 NXA
€216.82
Handlebar Set, Silver, NXA
Design based on the genuine HRC bar clamps as used on the NXA. Made from 6061-T6 for strength and durability, ideal for replacements for your Honda RS250 or for building a special. Designed for 50mm/52mm clamping surface, with an angle of the bars set at 17° This is the same as stock HRC clamps and is more radical than the usual <10° which most of our other handle bar clamps are set at.
TYGA no: TYLY-0359
SKU: hon-11212 Categories: ALL products, CNC parts, CNC parts, Honda, RS250R NF5 / NX5, ShopSet pipe full system with maggot silencer, Honda Monkey 125 2018-
€442.31
Set, Pipe, Full Race System, Monkey 125, Moto Maggot This full race system has been specifically designed for the Monkey 125 to maximise power. Made in stainless steel with spring mounted Moto Maggot silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! (A dB killer is included).</br>
Note that this exhaust system is supplied with mounting hardware so the original Honda exhaust guard can be installed with the TYGA Maggot system. However, this guard is not necessary and the exhaust system can be installed without the guard, as the pipework is not likely to contact the rider in normal operation.
All fitting hardware included.
</br>
<strong>Instructions</strong>
<a href= /media/wysiwyg/MSX-10449-fitman-exms0017.pdf target= blank >Download Instructions here</a>
</br>
<strong>Performance and Dynograph</strong>
The blue trace shows the 100% standard Honda Monkey, compared to the red trace, which is after installing the TYGA Full System set, Monkey 125, Moto Maggot. A useful gain all through the range, increasing as the revs rise up to maximum.
</br>
<strong>Please also see:</strong></br>
<a href= /index.php/set-pipe-full-system-with-carbon-oval-silencer-honda-monkey-125-2018.html >MSX-10451 Carbon Oval High level System, Monkey 125</a>
<a href= https://www.tygaeurope.com/index.php/set-pipe-full-system-no-silencer-honda-monkey-125-2098.html >MSX-10450 Stainless Oval High level System, Monkey 125</a>
Kitaco big throttle body kit 181cc NEO
€365.21 €314.49
Kitaco big throttle body kit 181cc NEO
High performance with high quality and durability.
This kit comes complete with filter, intake manifold, brackets.
All parts you need to install it on your Honda MSX125 Grom.
This kit is specially designed for the Kitaco NEO Big bore kit.
TYGA no: 403-1432100
SKU: MSX-10372 Categories: ALL products, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020 Tag: Honda MSX Kitaco NEO kit black