Silencer stainless oval right , KTM RC390
€301.75
Silencer, Right, Stainless, Oval/Carbon End Cap, Spring Mount, KTM RC390 Serpent, No Fittings
If you need a DB-killer, you need to order that loose. please see product. msx-10283
TYGA no: EXSL-0057R
SKU: ktm-10099 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, KTM, RC 390, ShopCarbon hugger short, Ducati 848/1098/1198
€122.25
This carbon rear hugger protects the rear shock and underside of your pride and joy from road dirt as well as making your bike stand out from the crowd. Very easy to install. Weight approx. 0.10 kg.
Note; we also make a longer hugger (BPCH-7123) for this model shown in photo for comparison
Carbon sprocket cover, KTM Duke390/RC390 2012 –
€110.40
Sprocket Cover, (Carbon), KTM390 Duke/ RC390
This lightweight carbon sprocket cover weighs less than the stock one and adds style to your ride.
Please note, this product fits the 390 Duke and RC390.
Let your KTM RC stand out from the crowd this beautiful carbon product.
KTM powerpart!
TYGA no: BPCC-7131
SKU: ktm-10028 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, Duke 390 2012-16, KTM, RC 390, RC390 2022-, ShopTop Triple clamp CNC silver kit, Honda NSR150
€218.46
CNC machined top triple clamp with detachable ignition switch/lock holder for your NSR150SP.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch/lock holder is positioned to allow use of the steering lock, but can be removed for race use.
TYGA no: TYLY-0051
SKU: hon-10282 Categories: ALL products, CNC parts, CNC parts, Honda, NSR150SP, ShopLower Cowling (GRP), MC18, GP-T, Assy.
€183.50
Lower Cowling (GRP), MC18, GP-T, Assy.
This product is designed to be used with BPFU-9035 as part of the Bodywork set BPFS-xxxx
Designed in-house by TYGA Perforance and using 15 years experience of developing fairings for the NSR250, this fairing is lightest and most stylish yet. The design allows for the extra width of an HRC radiator while at the same gives maximum clearance with the track at high angles of lean. Other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is under 1 kg but strength retained using high strength epoxy resins and good design. See also carbon version BPCL-9035.
This product is supplied with lower mounting stays on the left and right.
Compatible products:
This product must be used with BPFU-9035
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with chambers:
1. stock systems, fit with no spacing but will need a small part of the indent on the lower vent removed to clear the chamber. We can modify the lower to fit the stock chambers if requested
2. Tyga chambers require some spacing but no cutting.
3. Other systems, can not advise, but should require only spacing or possibly cutting of front of lower where front cylinder header exits.
TYGA no: BPFL-9035
SKU: hon-10728 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, NSR250 MC18key holder CNC silver, Honda NSR250 MC18/MC21/MC28
€121.39
Ignition Switch Holder, CNC Silver, NSR250
This is a removable ignition switch/lock holder for our NSR triple clamp. Can be ordered as part of a triple clamp set or by itself or to fit to our TYGA triple clamps TYLY-0041 and TYLY-1041
TYGA no: TYLY-0141Â
SKU: hon-10268 Categories: ALL products, By model, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, ShopCowling, Side, RH, Green, Ninja 250R 2008 -12
€259.23
Cowling, Side, RH, Green, Ninja 250R 2008 -12
TYGA no: 55028-0272-777
SKU: kaw-10197 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopStay maggot silencer, Honda MSX125SF GROM
€21.25
Stay, Maggot Silencer, MSX125SF, High Level Exhaust
This product allows for the use of a TYGA Performance high level full race system with the 2016 second generation MSX125SF Grom. Some small modification to the rear fender is required to allow for installation, but once installed, the stay is neat and tidy and unobtrusive. This product is suitable for, and included with, the following model exhaust:
EXPS-0065 Set, Pipe, Full Race system, MSX125SF Grom, Moto Maggot
Note: This product can be ordered individually and used for customizing your bike with any high level exhaust. See also similar product BPSY-0177 which has the mounting holes further toward the rear and is used with our oval silencer full race system EXPS-0066 and EXPS-0067.
TYGA no: BPSY-0175
SKU: MSX-10342 Categories: ALL products, Exhausts, Honda, MSX125SF 2016 -2020, Shop