Tank filler cap racing , Kawasaki type 4
€69.87
Tank Filler Cap, Keyless, Racing Type, Kawasaki Type 1
This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves
Supplied complete with seals and mounting hardware, it can be installed in minutes. This product is suitable for most bigger Kawasaki sportsbike models pre 1999.
See also TYLY-0115 and TYLY-0116 for other Kawasaki types.
Tank filler cap “racing”, Honda type 4
€69.87
Tank Filler Cap, Keyless, Racing Type, Honda
This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves
Supplied complete with seals and and mounting hardware, it can be installed in minutes. This product is suitable for nearly all Honda sportsbike models since the 1990s which have the usual 7 allen bolt mounting arrangement (3 which actually mount to the tank and the other 4 dummy ones for the outer ring)
Suitable for the following models:
- CBR 600 F4I F4 F3 F2 (1991-2008)
- CBR 600RR (2003-2011)
- CBR 900 (1995-1999)
- CBR 929 (all years)
- CBR 954 (all years)
- RC51 (all years)
- VTR 1000 (all years)
- CBR1000RR (all years)
- CBR 1100 1100XX (all years)
- CB 600F (07-10)
- CB1000R (08-11)
- CB 900F 919 Hornet 900 (all years)
- CBR 250RR (All Years)
- CBR 400RR (All Years)
- RVF 400 (All Years)
- VFR 400 (All Years)
TYGA no: TYLY-1222
SKU: hon-11441 Categories: ALL products, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR250R MC19, CBR250RR MC22, CBR400RR NC23, CBR400RR NC29, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Hawk/Bros 400/650, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RC36-2 -> RC30 replica products, RVF400RR NC35, Shop, Tank fillers, Various parts, Various parts, Various parts, Various parts, various parts, Various parts, various parts, VFR400RR NC30, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97, VTR1000Sp1SP2Set full race system under belly with short stainless silencer + carbon side cover, Honda Monkey 125 2018-
€731.40
Set, Pipe, Full System, Underbelly, Monkey 125, Stainless Oval/Carbon End Cap, Short, with Carbon Side Cover
This full race system has been specifically designed for the Monkey 125 to maximise power. Made in stainless steel with spring mounted stainless silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! (A dB killer is included).
Note that once the stock system has been removed from the Monkey, there is an empty space under the seat on the right side. This set includes Carbon Side Cover BPCC-7142R which has been designed to mirror the left side cover. This will fill in the gap under the seat and complete the transformation. Refer to photos of the exhaust installed for more details.
Performance and Dynograph
The blue trace shows the 100% standard Honda Monkey 125, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0107) with no other changes to the stock bike.
A useful increase in peak power and further gains could probably be had with remapping etc.
Similar Products:
Please also see:
EXPS-0107 Stainless, Underbelly, with long silencer
Carbon front fender, CBR500
€187.52
Carbon direct replacement for OEM Honda item. Pre drilled for easy fitting. Compatible with:
CBR500F
CBR500X
CBR500R
Update your bike with this great carbon product, direct replacement of the original part
Silencer aluminium Classic “SHORTY’ 60mm, 2 stroke black endcap
€76.12
Silencer, Shorty, Aluminium Classic, Two Stroke, Assy.
This shorty aluminium two stroke silencer has been designed for those owners of two stroke motorcycles looking for a more old fashioned classic look. They have similar dimensions and perform the same as our other two stroke silencers and are available with two different colour options for the exhaust exit cap and nozzle to suit the customers’ requirements.
Stainless steel pressed mounting end cap with 3 M6 threaded holes for mounting to exhaust chamber flange
Stainless steel exit end cap and long nozzle in traditional design with choice of raw stainless or black powder-coated finish
Cartridge glass wool insulation for greater longevity
Lightweight: weighs just 0.7kg
Tough anodised body finish for enhanced looks and weather resistance
Silencer is supplied with paper gasket and stainless steel bolts and washers.
“Note this product is intended to be used with our exhaust chambers (EXCS-****) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber.”
Compatible Parts:
All Tyga Performance Two Stroke chamber sets. Remember to order enough silencers for one complete system!
Other Alternative Products:
EXSL-0001 Aluminium Classic
EXSL-9005 Aluminium Premium
EXSL-0003 Carbon
EXSL-0004 Carbon/Kevlar
EXSL-0067 Shorty Aluminium Premium
EXSL-0065 Shorty Carbon
EXSL-0066 Shorty Carbon/Kevlar
TYGA no: EXSL-0002B
SKU: alg-10370 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Cagiva, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, ShopAluminium fairing stay, Honda VFR400 NC30
€130.42
Direct replacement for stock item, 50% of the weight
Compatible Parts:
Upper cowlings: OEM Honda NC30, BPFU-0009, BPFU-0010, BPFU-0011, BPFU-0012, BPFU-0014, BPFU-0016 and BPFU-0020, for use with NC30 model only
Please note:
This product is designed for racing use to support the upper cowling and when used on a street use on bikes where the upper stay is needed to mount the mirrors some vibration in the mirrors will occur.
Beautiful, perfect fitment and give your bike that HRC look.
Lower cowling (GRP) yellow, Honda MSX125SF GROM
€332.31
Lower cowling (GRP) yellow, Honda MSX125SF GROM
Lower Cowling, (GRP), yellow, MSX125SF. Bling up your GROM with this cool component. High quality mounting hardware provided and easy to install.
This Lower Cowling is also available as BPCL-7428 in Carbon
TYGA no: BPFL-7428Y
SKU: msx-10387 Categories: ALL products, Bodywork and carbon, Honda, MSX125 GROM, MSX125SF 2016 -2020, ShopStay, wire harness connector, Honda RS250R NXA
€4.64
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA no: BPSY-0322
SKU: hon-11384 Categories: ALL products, Honda, RS250R NF5 / NX5, RS250R NXA, Various parts