Triple Clamp Set, 3D, CNC Silver, NC35 Forks to fit MC21/MC28
€673.59
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3305
SKU: hon-11270 Categories: 4 stroke exhaust sets, ALL products, CNC parts, CNC parts, Exhausts, Honda, NSR250 MC21, NSR250 MC28, Shop, SilencersTank filler cap racing (forward fill hole type), KTM 7 hole
€69.87
<p><strong><span>Tank Filler Cap, Keyless, Racing Type, KTM, 7 Hole</span></strong></p>
<p><span>This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves</span></p>
<p><span>Supplied complete with seals and mounting hardware, it can be installed in minutes.</span></p>
<p><span>This product is suitable for KTM RC series sports bike models (RC125/200/250 and 390)</span></p>
<p><span>Fits all KTM RC models which are using the OEM filler cap with code: 90507008000 (2014-2016) but also may fit on later models using a 7 hole filler cap.</span></p>
<p><span>Suitable for the following models:</span></p>
<p><span>KTM</span></p>
<ul>
<li><span>KTM RC125</span></li>
<li><span>KTM RC200</span></li>
<li><span>KTM RC250</span></li>
<li><span>KTM RC390</span></li>
**** Please check photo 2 ****
</ul>
TYGA no: TYLY-0223
SKU: alg-10318 Categories: ALL products, CNC parts, CNC parts, KTM, RC 125/200, RC 390, Shop, Tank fillers, Various parts, Various partsFront sprocket 16T, Honda MSX125 GROM
€10.82
16T steel front sprocket for Honda MSX125. Made by JT. To fit standard #420 chain.
TYGA no: JTA-H-NO-420-F-16TÂ
SKU: MSX-10122 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, Shop, Sprockets, SprocketsWaterpump rebuild set, Honda NSR250 MC21/MC28
€63.89
All necessary seals and bearing to rebuild your NSR250SP/R waterpump.
Please note that it is necessary to remove the clutch cover to overhaul the waterpump, so a clutch cover gasket may also be required.
TYGA no: NHPS-0008
SKU: hon-10557 Categories: ALL products, High performance, Honda, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various partsKitaco big throttle body kit 181cc NEO
€365.21 €314.49
Kitaco big throttle body kit 181cc NEO
High performance with high quality and durability.
This kit comes complete with filter, intake manifold, brackets.
All parts you need to install it on your Honda MSX125 Grom.
This kit is specially designed for the Kitaco NEO Big bore kit.
TYGA no: 403-1432100
SKU: MSX-10372 Categories: ALL products, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020 Tag: Honda MSX Kitaco NEO kit blackO- ring for exhaust, RGV250 / RS250
€5.97
Replacement O rings for the TYGA exhaust manifold used with the TYGA expansion chamber.
Remember to order four of these items to service both expansion chambers.
This is a replacement part. When ordering chambers, this item is included in the price and you do not need to order this parts separately.
Compatible with the following TYGA systems:
EXCS-0007
EXCS-0008
EXCS-0009
EXCS-0010
EXCS-0011
EXCS-0014
EXCS-0016
EXCS-0018
TYGA no: EXOR-0001
SKU: alg-10024 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Exhausts, Exhausts, Exhausts, RGV250 VJ21, RGV250 VJ22, RS250, ShopCarbon engine cover (right),(5 speed engine) Monkey 2022-
€93.94
TYGA no: BPCC-7542
SKU: msx-10516 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, Monkey 125 2018-, MSX125 2021-, ShopBush 3rd & 4Th driven gear no.22, RGV250/RS250
€30.89
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl