Toptripleclamp nut, RGV250 / RS250
€30.34
Top triple clamp nut. CNC 3D machined from 7075 T6 aluminium. Light weight and good looking. Clear anodised for a long lasting finish.
This nut is a direct replacement to the top nut on:
Suzuki VJ21,
Suzuki VJ22
Aprilia RS-250
Suzuki SV650
and others. The thread is M22X1.
Torque setting: 65Nm
TYGA no: TYLY-0048
SKU: alg-10013 Categories: ALL products, Aprilia, By product, CNC parts, CNC parts, CNC parts, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Various partsStay B, VFR750F, 3rd Gen, 90-93
€15.90
TYGA no: BPSY-0319B
SKU: hon-11331 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93Silencer aluminium round 43mm, Kawasaki ZXR250 2008 –
€216.12
Silencer, Aluminium, Round, 43 mm. x 380 mm., Assy.
This silencer has polished stainless steel endcaps and a tough anodized aluminium tube for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
Compatible with TYGA and other systems which use a 2 inch external diameter tail pipe, this silencer uses a 4 inch x 380 mm. outside aluminium tube.
TYGA no: EXSL-0033
SKU: kaw-10021 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, Shop, SilencersTop triple clamp CNC black, KTM RC390, 2022-
€222.31
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1273
SKU: ktm-10208 Categories: ALL products, CNC parts, Exhausts, KTM, RC390 2022-, Stock list, all modelsCarbon tank cover, Yamaha V-max
€261.38
Weight approx. 0.48 kg. This item replaces the heavy steel cover. It is supplied with mounting cups for frame rubbers and rear mount for latch mechanism. Fits in minutes.
Fuel Tap / Pet Cock, MC16/MC18
€115.94
Fuel Tap / Pet Cock, MC21/28
TYGA no: 16950-KV3-005
SKU: hon-11081 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC18Lower cowling (GRP) stock shape, Honda NSR250 MC18
€263.33
Lower Cowling (GRP), Stock Shape, 1989 NSR250, MC18
Replacement part, to be used with Upper Fairings BPFU-9123 and BPFU-9222
See also BPFS-0173 and BPFS-0174 for complete sets with upper, lower fairing and screen.
TYGA no: BPFL-9122
SKU: hon-10917 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, ShopCowling center flat black, Honda MSX125 GROM
€17.03
Cowling center flat black, OEM Honda part
TYGA no: 77230-K26-900ZF
SKU: MSX-10318 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, Shop