Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Racing stepkit black/SILVER adjustable, Honda Monkey 2018

395.87

(479.00 inc. VAT )

Racing Rear Set Kit, Adjustable, Black, Monkey 125

With all major components designed specifically for the Monkey 125 in mind, this rear set kit is the best on the market. Designed in-house by TYGA Performance using the latest CAD/CAM software, these tough CNC machine-made step kits are made from top quality, aircraft grade aluminium and utilise TYGA’s unique and elegant system to provide ten different foot peg positions. The kit features levers moving on ball bearings to give precise and smooth movement. In addition to the technical specifications, emphasis has also been given to make the steps as uncluttered as possible with the rear master cylinder hidden from view and no unsightly unused holes on view etc. The kit comes complete, ready to bolt on with stainless steel fasteners, new OEM Honda axle bolt and carbon heel guards. With individualism in mind, there is a choice of ten colour combinations available and all components are available as replacement or separate items.

Notes:

No real brake light provision. If required, we recommend installation of inline pressure switch.

Fitting this rear set requires replacing the axle bolt with a slightly longer one, a new orginal OEM honda axle bolt is included

This rear set cannot be used in a reverse (GP) shift pattern

TYGA no: STAA-1027SILVER

SKU: msx-10425 Categories: , , , ,
Read more

Side cover left Red, Honda MSX125 GROM

39.31

(47.57 inc. VAT )

Side cover left Valentine Red, OEM Honda part

TYGA no: 83540-K26-900ZB

SKU: MSX-10119 Categories: , , , ,
Read more

Carbon sprocket cover, Honda Monkey 125 2022 5 speed

126.94

(153.60 inc. VAT )

Rear Fender, Carbon, stock shape, Monkey 125 2018-

Carbon direct replacement for original part. Lighter and looks way, way cooler!

IMPORTANT, Rear fender BPCH-7042 is not compatible with the Honda number
plate holder (part number 80100-KOF-T00 ) due to the weight of the Honda
part. We recommend when installing BPCH-7042 that TYGA registration holder
BPCK-7142 is installed instead

TYGA no: BPCX-7742

SKU: msx-10513 Categories: , , , ,
Read more

Set pipe Full race system WSS300 (race), KTM RC390

1,155.39

(1,398.02 inc. VAT )

Set pipe Full race system WSS300 (race), KTM RC390

This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.

And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.

By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.

The system features a primary silencer, which helps reduce the sound level without any loss of performance.

The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.

Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.

As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.

Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112

TYGA no: EXPS-0112

SKU: ktm-10147 Categories: , , , , ,
Read more

Carbon set, Honda CBR600 2007-11

453.72

(549.00 inc. VAT )

This set comprises the carbon products below. Enjoy great savings on product prices and free SAL shipping when ordering this set.

Please note TYGA logos are applied over the clearcoat and can easily be removed.

TYGA no: BPFS-0083

SKU: hon-10013 Categories: , , , ,
Read more

Clutch adjuster, Honda MSX125 GROM

25.00

(30.25 inc. VAT )

Top clamp nut in colour. Light weight and good looking. Anodised for a long lasting finish. available in a variety of other colours. See photos.

TYGA no: H073-A8Z1-0091BLACK -

SKU: MSX-10160-msx-10164 Categories: , , , , , ,
Read more

Fairing set street GP2010, Honda NSR250 MC21/MC28

510.74

(618.00 inc. VAT )

This set of bodywork comprises of the parts showing in the picture which are also available separately.

This fairing has excellent aerodynamics for racing or road use.

Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.

* A clear screen is provided unless you specify tinted in the comment box at check out.

Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.

Read more

Racing stepkit black/GOLD adjustable, Honda MSX125 GROM

395.87

(479.00 inc. VAT )

Racing Rear Set Kit, Adjustable, black with GOLD Slot Cover, MSX125 Grom

With all major components desgined specifically for the MSX125 Grom in mind, this rear set kit is the best on the market. Designed in-house by TYGA Performance using the latest CAD/CAM software, these tough CNC machine-made step kits are made from top quality, aircraft grade aluminium and utilise TYGA’s unique and elegant system to provide ten different foot peg positions. The kit features levers moving on ball bearings to give precise and smooth movement. In addition to the technical specifications, emphasis has also been given to make the steps as uncluttered as possible with the rear master cylinder hidden from view and no unsightly unused holes on view etc. The kit comes complete, ready to bolt on with stainless steel fasteners and carbon heel guards. With individualism in mind, there is a choice of ten colour combinations available and all components are available as replacement or separate items. Be sure to order the correct colour combination. Some photos below are for reference and show different colours to this product.

Note, no real brake light provision. If required, we recommend installation of inline pressure switch.

You can only use these steps on the MSX125SF if you have a TYGA high level exhaust

<a href= {{media url= wysiwyg/05-fitting-msx-step-kit-online-6e1bce74.pdf }} target= _self >Click here for fitting instructions</a>

TYGA no: STAA-1019GOLD

SKU: MSX-10240 Categories: , , , , , , , ,
Read more