Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Airbox Carbon/kevlar, Honda NSR250 MC21/MC28

635.04

(768.40 inc. VAT )

Airbox, Carbon/Kevlar, NSR250 MC21/MC28

This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.

Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007

Read more

Subframe aluminium , Honda RVF400 NC35

444.57

(537.93 inc. VAT )

This lightweight aluminium subframe is closely modelled on the stock NC35 subframe and can be substituted for the heavy steel one with a weight saving of XXX. Made from extruded and CNC machined 6000 series aluminium, this product is hand-welded by our craftsmen to provide a strong, accurate and beautiful component. Finished in Hard wearing satin black powdercoating, it can be painted if the customer so chooses.

Note this subframe is for race and single seat use only and cannot be used for carrying a passenger. All mounting positions for exhaust stay, seat cowling, seat pad, undertray, radiator overflow bottle, electrical components etc which are normally mounted to the subframe are supplied with subframe, there are even two mounting holes in case you wish to install a remote reservoir rear shock (BPCC-0046 is a direct fit), so it is almost a simple plug and play. Most of the standard fasteners are used, however where necessary, replacements are included.

If you wish to run this subframe without the rear fender, then this is also possible and we recommend installing it along with Seat cowling bracket part number: TYLY-0224-17 and battery box TYLY-0026. In this configuration, you will need modify the rear mounts of the battery box and drill them to attach to the subframe and to cable tie, starter relay etc which are normally attached directly to the undertray

TYGA no: TYLY-0225

SKU: hon-10985 Categories: , , , , , , ,
Read more

Section, Final, Stainless, Yamaha R25/R3

147.90

(178.96 inc. VAT )

Section, Final, Stainless, Yamaha YZF-R25 and YZF-R3

Used with EXPS-0072, EXPS-0073, EXPS-0074 and EXPS-0075.

TYGA no: EXPT-0027

SKU: yam-10077 Categories: , ,
Read more

Carbon rear hugger, Honda MSX125 Grom 1st + 2nd gen.

259.22

(313.66 inc. VAT )

Rear Hugger, (Carbon) Stock Shape, MSX125. Carbon direct replacement for original part. Lighter and looks way, way cooler!

Read more

Silencer GP-T, Aluminium 60mm, Two Stroke, Spring Mounted

95.39

(115.42 inc. VAT )

Silencer GP-T, Aluminium, Two Stroke, Spring Mounted, Assy

To complement our NX5 exhaust chambers, we wanted a silencer design which was both functional and classic. The result is this TYGA Performance GP-T style silencer. Available in three models, with carbon, carbon/Kevlar and aluminium outer tubes and with stainless end caps, it is mounted by two springs (included) for ease of installation and for looks. The silencer is strong and easily rebuildable, using rivets to assemble. Remember to order two silencers for every twin cylinder exhaust system! Also see EXSL-0069 and EXSL-0069.

Note, this silencer is only compatible with the NX5 RS250R exhaust system and cannot be mounted on other exhaust chambers in our product range.

TYGA no: EXSL-0070

SKU: hon-10903 Categories: , , , , ,
Read more

Kit fairing set street GRP stock shape, Honda NSR250 MC21

766.71

(927.72 inc. VAT )

Kit, Fairing Set, Street, GRP, Stock Shape, NSR250 MC21

Complete set of stock shaped bodywork for the Honda NSR250 MC21

Consists of the following products (also available separately)

BPFU-0006 Upper Fairing
BPFL-9001 Lower Fairing
BPFT-9044 Seat Cowling
BPFF-0009 Front Fender
SCRE-0016 Clear Screen

TYGA no: BPFS-0204

SKU: hon-11221 Categories: , , , , ,
Read more

Carbon dash standard, Aprilia RS250

50.22

(60.77 inc. VAT )

This carbon dash is the same shape as the stock Aprilia dash used on the later Mark II RS250 (1998-2008) Suitable for stock bodywork only.

It adds bling factor and weighs only 40 grams!

Update your bike with this great carbon product, direct replacement of the original part

Not suitable for TYGA bodywork kits (BPFS-0100 and BPFS-0101). For these kits order BPCX-3230

TYGA no: BPCX-9330

SKU: apr-10058 Categories: , , , , ,
Read more