Fairing set race stock shape, Honda NSR250 MC21
€674.07
This kit comprises of parts below.
Upper Fairing
Lower Fairing
Seat Fairing
Front Fender
Screen
The fairing is a race version of the stock shape with headlight and indicator holes filled in. The lower is in one piece for simple installation and removal.
Ideal for race classes where retaining stock shape (or similar) is necessary to comply with rules. The panels are top quality, being lightweight, flexible and tough. Constructed with epoxy resin and multi layer cross weave mat; do not confuse this with budget race glass made with polyester and chopped strand just because the price is right!
This kit is supplied with clear screen. Please state if you would like a tinted screen or and we will be happy to change to suit. Same applies if you wish to substitute a different model front fender.
Please note that the fairings only weigh approx. 1kg for upper fairing panel and 1.5 for lower and 1.6 kg for seat cowling. To ensure a safe delivery, the box they are sent in weighs 4 kg. You may want to consider two sets and save on shipping…
Delivered in white primer
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: BPFS-0112
SKU: hon-10356 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, ShopCarbon front fender, Honda CBR600 2005-6
€219.78
Carbon direct replacement for OEM Honda item. Pre drilled for easy fitting.
Update your bike with this great carbon product, direct replacement of the original part
Seat set style RVF, VFR400 NC30 (no taillight holes)
€240.81
Seat Cowling (GRP), NC30, RVF Race Style, No Tail Light
RVF shape Race Seat Cowling without taillight holes. Single seat, direct replacement for use on the Honda NC30, styled the same as the RVF400 seat cowling but single seat style like the RC45.
Seat cowling support is included in kit. This seat cowling uses OEM seat pad.
Please note this product does not have taillight holes. For seat cowling with taillight holes, please order BPFT-9013.
Compatible Parts:
All Tyga Performance and Honda OEM panels. Retains use of Honda OEM seat pad.
TYGA no: BPFT-9113
SKU: hon-10419 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer/ Carbon End Cap ,VFR750F, 3rd Gen,
€1,271.03
Set, pipe full race system round carbon/carbon end cap silencer RH exit, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system comes with the 450mm Round Auluminium Silencer but can be used with a number of our 2″ slip on exhaust silencers
See also our other sets with silencer included:
EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand and pillion foot rests however, the centre stand must be removed prior to installation.
TYGA no: EXPS-0153
SKU: hon-11327 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93Silencer aluminium round /carbon end cap 380mm (4 stroke) 2
€271.40
Silencer, Aluminium/Carbon End Cap, Round, 2 x 380 mm., Assy.
This silencer has a tough anodized aluminium tube and carbon exit cap for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
Compatible with TYGA and other systems which use a 2 inch external diameter tail pipe, this silencer uses a 4 inch x 380 mm. outside aluminium tube.
TYGA no: EXSL-0140
SKU: alg-10136 Categories: 4 stroke exhaust sets, ALL products, exhaust system replacement parts, Exhaust systems, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, Silencers, VFR400RR NC30, VFR750F Gen 4, 94-97Clutch Lever TYGA CNC flip up , KTM Duke – RC125/RC200/RC390
€54.27
Clutch Lever TYGA CNC flip up , KTM Duke – RC125/RC200/RC390
CNC machined from solid billet, these flip up type levers are made to a very high standard.
Not to much bling, and the orange color matches your KTM RC series good quality and adjustable in reach and length.
Fits’s in minutes and changes the appearance of your KTM!
TYGA no: LEVC-7003
SKU: ktm-10077 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, Duke 125/200 2012- 16, Duke 125/200 2017 -, Duke 390 2012-16, Duke 390 2017 -, KTM, RC 125/200, RC 390, RC390 2022-Handle bar clamp, Right, black, 41mm, Ninja 400
€90.76
Handlebar Clamp, Right, Black, 41mm, Ninja 400
Replacement Right handlebar clamp for handlebar set TYLY-1212
Tyga Step Kit Replacement Peg Spacer, Black, MSX125 Grom
€9.68
Tyga Step Kit Replacement Peg Spacer, Black, MSX125 Grom