Kit, Fairing Set, GRP, (Street) MC21, MC28, NSR250V
€920.57
Kit, Fairing Set, GRP, (Street) MC21, MC28, NSR250V
Modelled closely from the front fairing set taken off an actual NSR500V HRC factory machine, this kit has been designed to faithfully reproduce the appearance and silhouette of the NSR500V but to allow it to fit the NSR250 with correct mounting points and clearances. This fairing set can be installed with both the MC28 and the MC21, (and possibly the MC18, though we have not tried that model).
The set consists of the parts shown below and has a special TYGA designed triple beam LED headlight unit subtly located in what would normally be the front air duct. All special mounting hardware and windscreen is provided. Note, you do not need to change the meter stay for either the MC21 or MC28 models to install this fairing which bolts to the stock meter and rear frame spar side stay and lower stay locations with all hardware provided.
The fairing can be used with stock and all TYGA exhaust systems including use with the specially designed 250V exhaust system EXCS-0047
We recommend installing this fairing set with seat set BPFS-0196 on the NSR250 to complete the NSR250V bodywork style. For a complete transformation of the whole bike, we also recommend exhaust system EXCS-0047 and EXSL-0083 or EXSL-0084.
TYGA no: BPFS-0195
SKU: hon-11055 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Exhaustset stainless steel carbon silencer round, Honda CBR125
€479.79
This full race system has been specifically designed for the CBR125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too!
TYGA no: EXPS-0006Â
SKU: hon-10277 Categories: 4 stroke exhaust sets, ALL products, CBR125R/CBR150R 2004-10, Exhausts, Honda, ShopSilencer GP-T, Aluminium 60mm, Two Stroke, Spring Mounted
€95.39
Silencer GP-T, Aluminium, Two Stroke, Spring Mounted, Assy
To complement our NX5 exhaust chambers, we wanted a silencer design which was both functional and classic. The result is this TYGA Performance GP-T style silencer. Available in three models, with carbon, carbon/Kevlar and aluminium outer tubes and with stainless end caps, it is mounted by two springs (included) for ease of installation and for looks. The silencer is strong and easily rebuildable, using rivets to assemble. Remember to order two silencers for every twin cylinder exhaust system! Also see EXSL-0069 and EXSL-0069.
Note, this silencer is only compatible with the NX5 RS250R exhaust system and cannot be mounted on other exhaust chambers in our product range.
TYGA no: EXSL-0070
SKU: hon-10903 Categories: ALL products, CNC parts, Exhaust, Honda, RS250R NF5 / NX5, ShopCarbon sprocket cover, KTM Duke125/200
€110.40
Sprocket Cover, (Carbon), KTM125 Duke and 200 Duke
This lightweight carbon sprocket cover weighs less than the stock one and adds style to your ride.
Please note, this product fits the following models
125 Duke
200 Duke
Let your KTM RC stand out from the crowd this beautiful carbon product.
KTM powerpart!
TYGA no: BPCC-7231
SKU: ktm-10025 Categories: ALL products, Bodywork and carbon, Carbon, Duke 125/200 2012- 16, KTM, ShopProx top end bearing, Suzuki RGV250 / Aprilia Rs250
€12.14
ProX Quality product
size: 16 x 20 x 17.7 mm
TYGA no: 213349.0
SKU: alg-10103 Categories: ALL products, Aprilia, High performance, High performance, High performance, RGV250 VJ22, RS250, Shop, SuzukiLower Cowling (Carbon), NC35, T13, Assy.
€566.16
This lower cowling is part of a set of bodywork BPFS-0116.
TYGA no: BPCL-9218
SKU: hon-10806 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35Exhaust chamber Stainless steel Right, Gp-T Type, Honda RS250R NX5
€390.61
Exhaust chamber Stainless steel Right, Gp-T Type, Honda RS250R NX5
TYGA no: EXCB-0039R
SKU: hon-10899 Categories: ALL products, CNC parts, Exhaust, Honda, RS250R NF5 / NX5, ShopFuel tank (Ram air), Honda RS250R NX5
€1,321.68
Kit, Fairing Set, Carbon, Honda NX5 RS250R (1995 NSR250 Style)
Complete Carbon Bodywork kit which consists of the following products:
Upper Cowling Race, Carbon, NX5 RS250R (Late Model Style) (BPCU-9036)
The Carbon upper fairing is modelled off the 1995 NSR250 racer but will fit any NX5 which has the ram air through the fuel tank system.
Lower Cowling, Carbon, NX5 RS250R (Late Model Style) (BPCL-9036)
The Carbon lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell.
Seat Cowling Race, Carbon, NX5 RS250R (1995 NSR250 Style) (BPCT-9036(p))
This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors.
Seat Support NX5 RS250R (BPCX-9036)
Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)
Made to order, takes approx 1 to 2 weeks to be ready for shipping
TYGA no: BPFG-0002
SKU: hon-11445 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, Shop