Carbon heel guard right, VJ22/ NC30/NC35
€37.61
This lightweight carbon heel guard can be used as a direct replacement for the heavy steel one on the VJ22 RGV250. It can also be fitted to many other models, being suitable for most models which have Nissin master cylinders with 45-49 mm. pitch mounting holes.
Note this product is not supplied with STAA-0002 and STAA-0003 step kits but it is supplied with STAA-0004. Please add this product to your cart if you require a right side carbon heel guard for the STAA-0002 and STAA-0003.
TYGA no: BPCC-9002
SKU: alg-10047 Categories: ALL products, Carbon, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, RGV250 VJ22, RVF400RR NC35, Shop, Suzuki, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Carbon front brake reservoir stay, Honda NSR250
€36.48
Replacement for tired the stock front brake resevoir stay. This trick carbon stay can be used as a direct replacement for the heavy steel one on the NSR250. It weighs about 25% of the original and as well as being stiff and strong, looks like it belongs on a GP bike.
Beautiful, perfect fitment and give your bike that HRC look.
TYGA no: BPCC-9015
SKU: hon-10408 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopSet upper/meter stay Race, Kawasaki Ninja 400 2018-
€292.88
Set, Upper/Meter Stay, Race, Ninja 400
This lightweight all aluminium upper cowling/meter stay replaces the big and complicated heavy steel one supplied with the bike and weighs a fraction of the original.
It is designed to be strong but minimal and supports both the fairing and instrument securely. It consists of a CNC machined aluminium clamp around the headstock and a lightweight aluminium fabricated stay which has been powdercoated for a durable finish.
It is simple and easy to install and in the event of an accident, it is easy to replace or repair. The instruments are mounted using the original stock mounts and it has a tab for holding the tipover sensor, also includes a stay to relocate the regulator.
Please note this is for circuit use only and can be installed with TYGA Performance ( BPFS-0175) or other race bodywork.
TYGA no: TYLY-0216
SKU: kaw-10153 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-Carb Service Kit A, 40 pieces, Honda VFR750R RC36 (90-93)
€81.92
Carb Service Kit A, 40 pieces, Honda VFR750R RC36 (90-93)
LiteTek Carburettor Seal Kit to suit: Honda VFR750R RC36 (1990-1993)
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-025 Float Bowl Ring, Material: Flourosilicone (Part of Honda Kit No. 16010-MT4-000)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A (Part of Honda Kit No. 16010-MT4-000)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel
4x OR-009 Drain Screw O-Ring, Material: Viton 70A (Part of Honda Kit No. 16010-MT4-000)
4x OR-040 Air Cut Seal, Material Viton 70A (Part of Honda Kit No. 16048-MM5-671)
4x OR-006 Needle O-Ring, Material: Viton 70A (Part of Honda Kit No. 16010-MT4-000)
4x OR-018 Vacuum Breather O-Ring, Material: Viton 70A (Part of Honda Kit No. 16040-MR7-004)
4x OR-011 Overflow O-Ring, Material: Viton 70A (Part of Honda Kit No. 16040-MR7-004)
4x OR-012 Fuel Tee O-Ring, Material: Viton 70A (Part of Honda Kit No. 16040-MR7-004)
4x CS-004 Choke Plunger Cap, Material: HNBR (Part of Honda assembly 16047-ML7-004 or 16047-MAJ-870)
Please check that your Honda uses the oval shaped air-cut ring, that is part of the Honda air cut valve assembly (part number 16048-MM5-671), to ensure that this is the correct kit for your motorcycle before proceeding with your purchase.
TYGA no: CKA-Honda-VFR750R-RC36 (90-93)
SKU: alg-10348 Categories: ALL products, Carburettor Service Kits,, Honda, VFR750F Gen 3 90-93Carbon meter cover, NSR250 MC28
€36.50
Attractive carbon cover for MC28 meter assembly.
For fitment, simply remove the three retaining bolts, stick on the cover and replace the bolts
TYGA no: BPCC-0001
SKU: hon-10245 Categories: ALL products, Bodywork and carbon, Carbon, Honda, NSR250 MC28, Shop, Various partsBrake Reservoir Cap, Front, Ninja 250R 2008 -12
€27.76
Brake Reservoir Cap, Front, Ninja 250R 2008 -12
TYGA no: 43026-1074
SKU: kaw-10204 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopCarbon ignition cover, Honda VFR400/RFV400
€119.92
This engine protective cover is made from lightweight carbon with an abrasion resistant inner layer of Kevlar. Now requirement for many racing classes and a sensible and attractive addition to a road bike.
Approx weight 0.09 kg
TYGA no: BPCC-9004
SKU: hon-10486 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, Shop, VFR400RR NC30Seat set race, Aprilia RS250
€500.14
Seat set race, Aprilia RS250
This kit comprises all the parts shown on picture, which are also available separately.
This kit is supplied with all additional fasteners required to mount it to a stock Aprilia RS250 MKII
For Aprilia RS250 MK1 owners, you can use this fairing but it’s not a direct fit.
The dash is different, the digital meters (MK2) fits the TYGA frame.
Tank MK1 looks the same but is little different. The seat needs adjustment the tank is a little bigger.
The cooling- and oil tank are in the sub frame (MK1) and on the side of the frame MK2.(order alg-10015, for cooling tank)
The steps left and right of the MK2 have extra brackets, the MK1 don’t have these. You need this fit the lower TYGA cowling.
TYGA no: BPFS-0103
SKU: apr-10035 Categories: ALL products, Aprilia, Bodywork, Bodywork and carbon, RS250, Shop