Racing step kit, Honda VFR750 (gen 3) 1990 – ’93
€432.66
Racing step kit, Honda VFR750 (gen 3) 1990 – ’93
TYGA Performance racing step kit assembly. Designed in-house by TYGA Performance, these CNC machined step kits are made from top quality, aircraft grade aluminium. Features levers moving on ball bearings to give precise and smooth movement, and comes complete, ready to bolt on with stainless steel fasteners and all the required hardware.
Includes rear brake light provision, and retains the standard exhaust guard.
Carbon heel guards are included for both left and right hangers.
Peg position is 10 mm. up and 10 mm. back. Pitch of hanger to frame mounting holes is 78.6 mm.
TYGA no: STAA-0031
SKU: hon-11225 Categories: ALL products, CNC parts, Honda, Shop, VFR750F Gen 3 90-93Washer, Fr. Sprocket Lock, MC28
€4.00
Washer, Fr. Sprocket Lock, MC28
TYGA no: 23815-KV3-000
SKU: hon-11147 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Carbon cover, temp Gauge 64mm, Honda
€25.10
Carbon cover, temp Gauge 64mm, Honda
This cover fits snuggly over the original plastic Honda gauge cover and adds a sporty appearance. It is also ideal for hiding any ugly scratches or dents that may have occurred over the years. Fits in second and can be held in place with a dab of glue or silicone adhesive.
This product is suitable for the following models:
MC18 NSR250
NC30 VFR400R
RC30 VFR750R
Also available as a complete set with speedo,temp gauge and rev counter, see BPCC-0027
This product might also fit other models.
TYGA no: BPCC-0024
SKU: hon-10609 Categories: ALL products, Carbon, CBR400RR NC23, Honda, NSR250 MC18, Shop, Various parts, Various parts, VFR400RR NC30Sub frame aluminium GP-T, Honda NSR250 MC21/MC28
€196.44
Subframe, Aluminium, NSR250 MC21/28 GP-T
This lightweight aluminium subframe weighs less than 1.2 kg and replaces the stock item when used as part of the NSR250 GP-T seat kit. Essential for mounting the seat cowl, this component is supplied with all brackets and mounting points to substitute this for the OEM Honda item. Composed of extrusions and CNC machined sections, handwelded together by craftsman, this subframe is then blasted and anodized for a tough and attractive finish. Supplied with a regulator/rectifier stay as well as cable ties for securing the wiring.
Compatible Parts:
Use with seat cowling kits
BPFS-0128, 0129, 0130, 0131, 0132, 0133, 0134, 0135 and 0136
TYGA no: TYLY-0108
SKU: hon-10458 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, NSR250 MC28, ShopCarbon seat set race, Aprilia RS250
€1,059.04
Due to popular demand, our GP seat cowling kit is now available in carbon race version. These panels are both lighter and stronger than GRP. Finshed in three layers of tough clear coat to protect against UV light, they are ready to use and don’t require painting.* This kit comprises of the parts shown below which are also available separately.
*Please note, does not include front fairing kit which can be ordered, Graphics shown in photos are not included.
This kit is supplied with all additional fasteners required to mount it to a stock Aprilia RS-250
If you have left and right exiting chambers (side by side) you will need to add 1 X exhaust stay to your order (Only one supplied in kit for twin right exiting chambers)
For Aprilia RS250 MK1 owners, you can use this fairing but it’s not a direct fit.
The dash is different, the digital meters (MK2) fits the TYGA frame.
Tank MK1 looks the same but is little different. The seat needs adjustment the tank is a little bigger.
The cooling- and oil tank are in the sub frame (MK1) and on the side of the frame MK2.
The steps left and right of the MK2 have extra brackets, the MK1 don’t have these. You need this fot the lower TYGA cowling.
TYGA no: BPFS-0168
SKU: apr-10087 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, ShopGasket, Water Pump, MC28
€7.91
Gasket, Water Pump, MC28
TYGA no: 19226-KV3-680
SKU: hon-11091 Categories: ALL products, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28Gear 1st driven z=27 no.13, RGV250/RS250
€104.93
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Carbon seat set street, Aprilia RS250
€1,203.58
Due to popular demand, our GP seat cowling kit is now available in carbon. These panels are both lighter and stronger than GRP. Finshed in three layers of tough clear coat to protect against UV light, they are ready to use and don’t require painting.* This kit comprises of the parts shown below which are also available separately.
*Please note, does not include front fairing kit which can be ordered, code BPFS-1100. Graphics shown in photos are not included.
This kit is supplied with all additional fasteners required to mount it to a stock Aprilia RS-250
If you have left and right exiting chambers (side by side) you will need to add 1 X exhaust stay to your order (Only one supplied in kit for twin right exiting chambers)
For Aprilia RS250 MK1 owners, you can use this fairing but it’s not a direct fit.
The dash is different, the digital meters (MK2) fits the TYGA frame.
Tank MK1 looks the same but is little different. The seat needs adjustment the tank is a little bigger.
The cooling- and oil tank are in the sub frame (MK1) and on the side of the frame MK2.
The steps left and right of the MK2 have extra brackets, the MK1 don’t have these. You need this fot the lower TYGA cowling.
TYGA no: BPFS-1102
SKU: apr-10068 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, Shop