Side mount lower cowling, Honda VFR400 NC30
€9.04
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPSY-0323
SKU: hon-11390 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, Shop, Various parts, VFR400RR NC30Meter Stay Extension
€12.29
Replacement meter stay extension nylon shaft. Suitable for the following models:
BPFS-0013
BPFS-0014
BPFS-0020
BPFS-0115
BPFS-0116
BPFS-0119
See table for application of meter stay extensions with our body kits:
Tyga Step Kit Replacement Rear Brake Lever, Black, MSX125 Grom
€64.46
Tyga Step Kit Replacement Rear Brake Lever, Black, MSX125 Grom. Complete with bearings.
Top Triple clamp CNC black , Aprilia RS250 kit
€209.92
CNC machined top triple clamp for your Aprilia RS250.
Designed and manufactured in house as a direct replacement for the standard top triple clamp. Facilitates mounting holes for securing the ignition switch holder assy (TYLY-0153)
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp offer high strength while being lighter than the standard component, and looks fantastic!
Only fits the MK2 RS250
TYGA no: TYLY-1053p
SKU: apr-10018 Categories: ALL products, Aprilia, CNC parts, CNC parts, RS250, ShopCarbon hugger, Ducati monster 696/795
€159.41
Hugger, (Carbon), Ducati Monster, 696, 795
Silencer stainless steel Motogp style (4 stroke) 64mm maggot
€261.60
Silencer stainless steel Motogp style (4 stroke) 64mm “maggot” (alg-10222) Maggot silencer with 64 mm. inside inlet diameter. No mounting lug.Includes silencer clamp, mounting springs and spring hooks to weld onto existing exhaust tailpipe.
 
Tyga Moto Maggots are now available in five sizes, Mini, Midi, Moto, and Monster Mega Monster with inlet sizes of 35 mm., 43 mm., 50.8 mm., 54 mm and 64mm. respectively. As well as the basic five sizes, we have listed here some of the model specific Maggots which have lugs welded to them to suit their specific application. Of course, these can be mounted to other exhausts and offer an alternative to the basic Maggots.
All the silencers shown here are supplied with springs, spring hooks, and where applicable, mounting clamps.
 
<a title= Maggot 64mm href= {{media url= wysiwyg/06-maggot-exsl-0053-64mm-3fe5ec5c.PDF }} target= _self >Click here for PDF</a>
TYGA no: EXSL-0053
SKU: alg-10222 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Honda, Shop, SilencersRegistration/License Plate Holder, (Carbon), T13 Assy.
€136.75
This product is made using carbon fiber and holds the registration/license plate for use with our T13 seat cowlings. It is supplied with a registration/license plate illumination light for countries where this is a legal requirement. We also offer the same product but using only GRP, see BPFX-9118
This product attches by means of two bolts on an angled back flat plate and could be adpted to be used with other models with a flat undersurface.
TYGA no: BPCX-9118
SKU: hon-10823 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35Seat Cowling (GRP), NC35 T13, Assy.
€280.79
This is the all GRP seat cowling used in the NC35 T13 style seat cowling kit BPFS-0117.
This product is suitable as a replacement seat cowling in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC35.
To be used with
subframe TYLY-0025
battery box TYLY-0026
taillight BPLT-0013
Indicators BPLT-0020L and BPLT-0020R
registration/license plate holder BPCX-9118/BPFX-9118
TYGA no: BPFT-9218
SKU: hon-10808 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, Honda, RVF400RR NC35