Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Carbon Front fender, Suzuki GSX

196.87

(238.21 inc. VAT )

Carbon Front fender, Suzuki GSX

Direct replacement of the original Suzuki part

Let your bike stand out from the crowd with this beautiful carbon fibre product.

PLEASE NOTE: all ” TYGA” logo stickers on the carbon products can be easily removed because it is applied last above the clearcoat finish

Read more

Carbon fairing set street GP-T, Honda NSR250 MC21/MC28

1,780.94

(2,154.94 inc. VAT )

Kit, Fairing Set, Carbon, (Street), NSR250 GP-T

This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NSR250. As well as bringing the NSR250 up to date, it also offers huge weight saving and easy fitment and removal. Similar to a GP bike, the fairing is held on by R clips and nylon bungs for quick release. The kit is supplied with all mounting hardware including carbon fiber side stays and aluminium upper and front stays. The headlights used in this kit, are LED and consist of two units either side with 2 on low and 4 on high beam. The system uses a lot less current than conventional halogen systems while at the same time being discrete but stylish. Please note that the headlights do not comply with road use regulations and are unsuitable for high speed riding on unlit roads.

Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.

As well as this fairing BPFS-0138 which is made using carbon fiber panels finished in high gloss UV protective clearcoat, we offer a similar product using GRP (glass reinforced plastic) which is primed and ready for paint**. See BPFS-0137

* A clear screen is provided unless you specify tinted in the comment box at check out.

** We recommend trial fitting and making and minor adjustments before painting

Read more

Upper Cowling (Street GRP), VJ21, Stock Shape

149.04

(180.34 inc. VAT )

Upper Cowling (Street GRP), VJ21, Stock Shape

Replacement of original.

TYGA no: BPFU-0019

SKU: suz-10107 Categories: , , , , ,
Read more

Exhaust Chamber, Right, Stainless Steel, MC28

317.17

(383.78 inc. VAT )

This is the bare right side replacement chamber for EXCS-0005B suitable for EXCS-0005B and EXCS-0006B for the MC28

TYGA no: EXCB-0005RB

SKU: hon-10861 Categories: , ,
Read more

Set, Exhaust Chamber, NSR500V Style, Stainless Steel, NSR250 MC28

795.00

(961.95 inc. VAT )

Set, Exhaust Chamber, NSR500V Style, Stainless Steel, NSR250 MC28

Constructed in stainless steel, TYGA Performance combine modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and track testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut but this is where the automation ends. All chambers are hand rolled and welded by expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.

For more information on how to get the best power out of this system, combine it with other parts of our MC28 Power Up Kit (see under ‘technical help’ on left hand menu) to give your bike a massive power increase. In addition to performance, the chambers will enhance the bike’s appearance and save weight too. There is no need to compromise with fit either. The chambers are designed to give clearance to the swing arm and stock foot peg hangers as well as work with our Tyga Performance step kit STAA-0002. The stock bodywork does not need to be cut, (though repositioning of rear lower cowling down by 25mm is recommended)

The NSR250V design, is provided with silencers clamping hardware which mounts directly to the NSR250V seat cowling BPFS-9043 or BPFT-9143 via exhaust stays TYLY-0243 for a more secure and firm installation.

By selecting stainless steel for longevity and beauty, TYGA systems offer unbeatable value.

Please note this product fits MC28 only although it can be installed with the MC21 if the MC21 has an MC28 swing arm installed. For the MC21 with a stock MC21 swing arm, please select EXCS-0005A

This product, EXCS-0047, has one chamber exiting left and one chamber exiting on the right in a high position similar to the NSR500V race bike. As a consequence, this system is only suitable for motorcycles without passenger foot pegs. For motorcycles with passenger foot pegs, please select EXCS-0006 and EXCS-0005B

Parts included with this product:

1 x left side chamber, side by side (left exiting) stainless steel
1 x right side chamber, side by side (right exiting) stainless steel
2 x silencer single clamps and mounting bolts, washers and nuts. Be sure to select the correct type. 70mm for silencers EXSL-0083 and EXSL-0084 and 60-61mm for silencers EXSL-9005, EXSL-0003, EXSL-0004, EXSL-0065 , EXSL-0066 and EXSL-0067
2 x manifolds
2 x mounting flanges
4 x mounting springs
Not included are the silencers.

Important! To complete your Tyga exhaust system remember to order 2 silencers with every chamber set. Note, we recommend that if you are installing this exhaust with seat set NSR250V BPFT-9043 or BPFT-9143 then order exhaust stay set TYLY-0234

TYGA no: EXCS-0047

SKU: hon-11045 Categories: , , , , ,
Read more

Carbon front fender, CBR500

187.52

(226.90 inc. VAT )

Carbon direct replacement for OEM Honda item. Pre drilled for easy fitting. Compatible with:

CBR500F

CBR500X

CBR500R

Update your bike with this great carbon product, direct replacement of the original part

TYGA no: BPCF-7030 

SKU: hon-10326 Categories: , , , ,
Read more

Carbon seat Cowling , NX5 RS250R (1995 NSR250 style)

1,096.23

(1,326.44 inc. VAT )

Kit, Fairing Set, Carbon, Honda NX5 RS250R (1995 NSR250 Style)

Complete Carbon Bodywork kit which consists of the following products:

Upper Cowling Race, Carbon, NX5 RS250R (Late Model Style) (BPCU-9036)

The Carbon upper fairing is modelled off the 1995 NSR250 racer but will fit any NX5 which has the ram air through the fuel tank system.

Lower Cowling, Carbon, NX5 RS250R (Late Model Style) (BPCL-9036)

The Carbon lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell.

Seat Cowling Race, Carbon, NX5 RS250R (1995 NSR250 Style) (BPCT-9036(p))

This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors.

Seat Support NX5 RS250R (BPCX-9036)

Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)

Made to order, takes approx 1 to 2 weeks to be ready for shipping

TYGA no: BPCT-9036

SKU: hon-10949 Categories: , , , , ,
Read more

Fitting kit for Under cowl BPFL-7028 and BPCL-7028

32.07

(38.80 inc. VAT )

Fitting Kit for Under Cowl BPFL-7028 and BPCL-7028

Complete replacement fitting kit for TYGA-Performance Under Cowl for Honda MSX125/GROM

Suitable for BPFL-7028 (all colours) and BPCL-7028

Only sold as complete set

Read more