Big bore kit 300cc wiseco, NSR250 MC18/MC21/MC28

Be the first to review this product

€1,486.78

Availability: In stock

Product no: hon-10390 TYGA no: TPER-3007 
This 300cc Big Bore Kit is identical to the TPER-0007 300cc Big Bore Kit, but the standard 300cc pistons are replaced with high performance options.



In this case we have forged Wiseco pistons that are lighter and stronger than stock. They use Wiseco rings, clips and pins.



See below for performance details for TPER-0007.



Bore & Stroke is 59mm x 54.5mm giving a total displacement of 298cc.



Parts included in the NSR300 kit.



Cylinder x 2 (includes head studs, RC valve, pulley & nut and washers)

Rear Head x 1

Front Head x 1

Piston x 2

Ring set x 2

Piston Pin x 2

Piston Clip x 4

S/E Bearing x 2

Head gasket x 2

Cylinder gasket x 2

RC Valve cables x 4

Water hose x 1

Exhaust Manifold x 2 (to fit TYGA pipes)







Other information:



There is no problem about the RC valves hitting the piston due to thin cylinder wall thickness. This is not an issue on our kit as it's using different

cylinders, not modified NSR250. They are genuine OEM Honda cylinders, made and plated in Japan to their typical high quality.



The RC valves are easier to adjust than ever on the 300 kit, as there's only one adjuster screw to play with, and each cylinder marked at the correct 'fully open' position for simple setting.



Exact Jetting requirements for your area and application cannot be provided due to differing atmospheric conditions around the world. However, following are some base settings to work from:







MC21 Std bottom end, Wire splice, TYGA Pipes, Airbox lid mod with filter.







Temp: 29 C



Press: 1015mb



Hum: 65%



Alt: 30m







MJ - #182/#185



JN - Std./Std.



SJ - #38/#38



AS - 1.5 turns out



PwrJ - Std./Std.







Tip: Cooler temps, higher pressure and/or lower humidity require richer jetting. High altitude requires leaner settings. Starting off with rich settings will in the worse case foul a plug. Too lean a setting may destroy the engine.







This jet set-up is for guidance only. TYGA Performance cannot be held responsible for any engine damage incurred due to incorrect settings.















At present, this kit is available by special order. Each kit takes approx. four weeks to prepare.



 

Product Description

This 300cc Big Bore Kit is identical to the TPER-0007 300cc Big Bore Kit, but the standard 300cc pistons are replaced with high performance options. In this case we have forged Wiseco pistons that are lighter and stronger than stock. They use Wiseco rings, clips and pins. See below for performance details for TPER-0007. Bore & Stroke is 59mm x 54.5mm giving a total displacement of 298cc. Parts included in the NSR300 kit. Cylinder x 2 (includes head studs, RC valve, pulley & nut and washers) Rear Head x 1 Front Head x 1 Piston x 2 Ring set x 2 Piston Pin x 2 Piston Clip x 4 S/E Bearing x 2 Head gasket x 2 Cylinder gasket x 2 RC Valve cables x 4 Water hose x 1 Exhaust Manifold x 2 (to fit TYGA pipes) Other information: There is no problem about the RC valves hitting the piston due to thin cylinder wall thickness. This is not an issue on our kit as it's using different cylinders, not modified NSR250. They are genuine OEM Honda cylinders, made and plated in Japan to their typical high quality. The RC valves are easier to adjust than ever on the 300 kit, as there's only one adjuster screw to play with, and each cylinder marked at the correct 'fully open' position for simple setting. Exact Jetting requirements for your area and application cannot be provided due to differing atmospheric conditions around the world. However, following are some base settings to work from: MC21 Std bottom end, Wire splice, TYGA Pipes, Airbox lid mod with filter. Temp: 29 C Press: 1015mb Hum: 65% Alt: 30m MJ - #182/#185 JN - Std./Std. SJ - #38/#38 AS - 1.5 turns out PwrJ - Std./Std. Tip: Cooler temps, higher pressure and/or lower humidity require richer jetting. High altitude requires leaner settings. Starting off with rich settings will in the worse case foul a plug. Too lean a setting may destroy the engine. This jet set-up is for guidance only. TYGA Performance cannot be held responsible for any engine damage incurred due to incorrect settings. At present, this kit is available by special order. Each kit takes approx. four weeks to prepare.

Reviews

Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Size Guide

This is a custom CMS block. You can use it to display information about size guide, shipping, returns, refunds, latest promotions etc. Put any content you want here, like text, HTML, images, videos. There are many useful blocks like this one across the theme. All CMS blocks are editable from the admin panel. You can change name and delete block static (Size Guide) if you want.


Out brand sizes are designed to fit to the following body measurements:
Some brands may vary from these measurements but you can still use them as a guide.

LONG & SHORT T-SHIRTS SIZE GUIDE

SIZETO FIT CHEST SIZE
 INCHESCM
S 36-38 91-96
M 38-40 96-101
L 40-42 101-106
XL 42-44 106-111
XXL 44-46 111-116

Lengths of T-shirt will vary from style to style, however the average length of a size M top measures 27.5 inches / 70cm down centre back from collar to hem. Please see ''info & care'' on individual product pages for items specific length measurements.

MEN'S FOOTWEAR SIZE GUIDE

UK SIZEEU SIZEUS SIZEFOOT LENGTH (MM)
    
6 39 7 246
7 40.5 8 254
7.5 41 8.5 258
8 42 9 262
9 43 10 271

Custom Tab

This is a custom CMS block. You can use it to display information about shipping, returns, refunds, latest promotions etc. Put any content you want here, like text, HTML, images or videos. There are many useful blocks like this one across the theme. All CMS blocks are editable from the admin panel. You can delete block static Custom Tab if you want.

Shipping: Please allow about 5-10 business days for delivery. For delivery to Alaska or Hawaii, please allow 10-15 days for delivery. For delivery to PO Boxes in Alaska, Hawaii, US Territories and APO/FPO addresses, allow three weeks for delivery.

Backorders: All backordered items will be shipped via Standard Delivery service at no additional charge.

Returns Policy: You may return new, unworn or unused products within thirty (30) days of delivery for a full refund of the cost of the goods, or an exchange if preferred.