Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Silencer aluminium Classic 60mm , 2 stroke stainless endcap

76.12

(92.11 inc. VAT )

Silencer, Aluminium Classic, Two Stroke, Assy.

This aluminium two stroke silencer has been designed for those owners of two stroke motorcycles looking for a more old fashioned classic look. They have similar dimensions and perform the same as our other two stroke silencers and are available with two different colour options for the exhaust exit cap and nozzle to suit the customers’ requirements.

Stainless steel pressed mounting end cap with 3 M6 threaded holes for mounting to exhaust chamber flange
Stainless steel exit end cap and long nozzle in traditional design with choice of raw stainless or black powder-coated finish
Cartridge glass wool insulation for greater longevity
Lightweight: weighs just 0.7kg
Tough anodised body finish for enhanced looks and weather resistance
Silencer is supplied with paper gasket and stainless steel bolts and washers.

“Note this product is intended to be used with our exhaust chambers (EXCS-****) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber.”

Compatible Parts:

All Tyga Performance Two Stroke chamber sets. Remember to order enough silencers for one complete system!

Other Alternative Products:

EXSL-0002 Shorty Aluminium Classic
EXSL-9005 Aluminium Premium
EXSL-0003 Carbon
EXSL-0004 Carbon/Kevlar
EXSL-0067 Shorty Aluminium Premium
EXSL-0065 Shorty Carbon
EXSL-0066 Shorty Carbon/Kevlar

Read more

Carbon front fender Dax German

230.75

(279.21 inc. VAT )

Front Fender, (Carbon) German type, Honda Dax. Carbon direct replacement for original part. Lighter and looks way, way cooler!

TYGA no: BPCF-7037

SKU: MKY-007 Categories: , , , , , ,
Read more

Tyga Step Kit Replacement Gear Shaft Clamp

12.72

(15.39 inc. VAT )

Tyga Step Kit Replacement Gear Shaft Clamp

Read more

Undertray seat cowling VJ21 TYGA, Suzuki RGV250 VJ21

73.06

(88.40 inc. VAT )

Undertray (GRP), GP Seat, VJ21, Assy. 1

This is the all GRP undertray used in theGP style seat cowling kits for the VJ21, sets BPFS-0121 and BPFS-012218.

This product is suitable as a replacement in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the VJ21.

To be used with

seat cowling BPFT-9021

TYGA no: BPFX-9021 

SKU: suz-10104 Categories: , , , , ,
Read more

Set pipe slip on carbon oval with cap, CBR500

504.96

(611.00 inc. VAT )

.Set, Pipe, Slip On, CBR500, Carbon Oval/Carbon End CapMade in stainless steel with spring mounted carbon silencer, and precision made CNC machined end cap. (May not comply with noise regulations for some states and territories)This system is supplied with a carbon silencer EXSL-0043<iframe width= 560 height= 315 src= https://www.youtube.com/embed/CTgM0wCAvfg frameborder= 0 allowfullscreen></iframe>

TYGA no: EXPS-0045 

SKU: hon-10327 Categories: , , , , ,
Read more

Triple clamp set CNC black, Honda CBR250 MC22 -> CBR600 fork

673.59

(815.04 inc. VAT )

Triple Clamp Set, CNC Black, CBR600RR Forks to fit CBR250RR MC22

CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 48 mm / 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks on the lower clamp, please change options below)

Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.

They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.

Note, we recommend using Handlebar set 48 mm. TYLY-1012 when installing this triple clamp set for best clearance issue with the CBR250RR clocks and fairing.

Tightening recommendations:

Lower clamp pinch bolts: 23Nm.

Top clamp pinch bolts: 23Nm.

TYGA no: TYLY-1230

SKU: hon-11230 Categories: , , , , , ,
Read more

Carbon race airbox, Suzuki RGV250 VJ22

412.40

(499.00 inc. VAT )

Carbon race airbox, Suzuki RGV250 VJ22 (suz-10098)

Our race airbox is inspired by the GP road racing technology, taking advantage of a front air intake and all available space within the engine compartment.

And by using the lower part of the fuel tank as closing to increase the volumetric capacity of which becomes 9.5 lt against 6.2 lt of the standard component ( 53%).

The air intake (Snorkel) is positioned in the front to be able to suck a greater amount of air and with less turbulence than the positioning adopted in origin ( in the back)

Its shape also was designed using the calculation FEM (Finite Element Method) to minimize the load losses and therefore increase performance in the complete range of the RPM.

The kit also includes a carbon cover to be mounted close to the air intake to prevent suction of hot air.

All this is mainly reflected in an increase in engine performance, as shown below on the Dyno graph.

Greater maximum power ( 3 hp *)

Better throttle response

Higher max. RPM ( 500 rpm)

A GP “sound”

Improved access for maintenance

jet #310 – #320 (*)

Also be using Carbon you will have weight reduction of around 50% (465 grams compared to 970 grams OEM).

The filter is washable and gives better performance then original

* Standard engine

Please note, the rubber airbox manifolds are not with the airbox. You have the reuse the original ones.

TYGA no: special015

SKU: suz-10098 Categories: , , , , ,
Read more

Carbon set, Yamaha R1 2009-14

458.68

(555.00 inc. VAT )

Carbon set, Yamaha R1 2009-10

A set contains:

Front fender

Rear Hugger

Chain guard

Direct replacement for original Yamaha part

Buy a complete set and it saves you money.

PLEASE NOTE: all ” TYGA” logo stickers on the carbon products can be easily removed because it is applied last above the clearcoat finish.

TYGA no: BPFS-0089

SKU: yam-10001 Categories: , , , ,
Read more