Tank cover front, CBR250RR MC22
€101.04
This product is part of set BPFX-9125, (the other part being BPFX-9125R). This tank cover is designed to fit over a stock MC22 CBR250RR tank to prevent or cover up accident damage to the tank for example.
TYGA no: BPFX-9225F
SKU: hon-10211 Categories: ALL products, Bodywork, By model, CBR250RR MC22, Honda, ShopSeat Cowling (With Carbon), NC35 T13, Assy.
€361.17
This is the seat cowling with carbon (front section and around top and bottom air ducts) and is used in the NC35 T13 style seat cowling kit BPFS-0118.
This product is suitable as a replacement seat cowling in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC35.
To be used with
subframe TYLY-0025
battery box TYLY-0026
taillight BPLT-0013
Indicators BPLT-0020L and BPLT-0020R
registration/license plate holder BPCX-9118/BPFX-9118
TYGA no: BPCT-9218
SKU: hon-10809 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35Carb Service Kit A, 48 pieces, Honda VFR750R RC30
€97.64
Carb Service Kit A, 44 pieces, Honda VFR750R RC30
LiteTek Carburettor Seal Kit to suit: Honda VFR750R RC30
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-025 Float Bowl Ring, Material: Flourosilicone *
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A *
4x WS-001 Pilot Screw Washer, Material: Stainless Steel
4x OR-009 Drain Screw O-Ring, Material: Viton 70A *
4x OR-040 Air Cut Seal, Material Viton 70A *
4x OR-041 Breather O Ring, Material: Viton 70A **
4x OR-016 Top Cap O-Ring, Material: Viton 70A *
4x OR-042 Float Bowl O-Ring, Material: Viton 70A *
4x OR-011 Overflow O-Ring, Material: Viton 70A **
4x OR-012 Fuel Tee O-Ring, Material: Viton 70A **
4x CS-004 Choke Plunger Cap, Material: HNBR
Honda OEM parts numbers :
* No: 16010-MR7-014 → 16010-MR7-505 or 16010-MR7-691 → 16010-MR7-692 → 16010-MR7-505
** No: 16040-MR7-004
TYGA no: CK-Honda-RC30
SKU: alg-10349 Categories: ALL products, Carburettor Service Kits,, Honda, VFR750R RC30Velocity Stacks, NC30, Kit, 4 pcs
€149.37
Fuel Tank, GRP, VFR400R NC30, Unpainted
Top quality reproduction of the steel NC30 fuel tank in GRP. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
Seat set street GRP GP-T, Honda RVF400 NC35
€1,078.75
The ultimate seat set for your V4 Honda!
This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NC35. As well as bringing the NC35 up to date, it also offers huge weight saving and easy fitment and removal. The seating position is higher and roomier compared to the stock NC35 postition, bringing it into line with modern sports bikes ergonomics. The seat pad is designed to give plenty of feedback for race use and the cowling has plenty of space for tucking in behind the fairing along the straights. The seat cowling is designed so that the fuel tank can be removed while leaving the seat cowling installed, allowing for quick jetting changes etc.
The kit is supplied with all mounting hardware including subframe and battery box. The taillight used in this kit, is LED and may not comply with road use regulations in some territories,( though we have not heard of any issues after selling them worldwide for ten years).
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
As well as this seat cowlng set BPFS-0149 which is made using GRP (glass reinforced plastic) which is primed and ready for paint
** we offer a similar product using carbon fiber panels finished in high gloss UV protective clearcoat. See BPFS-0151
** We recommend trial fitting and making and minor adjustments before painting
TYGA no: BPFS-0149
SKU: hon-10582 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35TYGA tank catch kit,
€21.68
Exhaust Valve Bottle Holder, RGV250 VJ21/VJ22
In house designed and 3D printed with excellent strength and durability this exhaust valve bottle holder is the perfect solution to securely fit the exhaust valve bottle to the frame.
For exhaust valve bottle see BPAC-0011
TYGA no: BPAC-0011
SKU: alg-10320 Categories: ALL products, Aprilia, Bodywork and carbon, Honda, RC36-2 -> RC30 replica products, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS250, Shop, Suzuki, Various parts, Various parts, Various parts, various parts, Various parts, Various parts, Various parts, various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR750F Gen 3 90-93Silencer carbon/carbon cap, Yamaha R25 / R3
€275.21
Replacement Silencer, Carbon, Oval/Carbon End Cap, Yamaha R25/R3
Hand assembled with carbon sleeve. Precision made CNC machined mount cap, with sleek carbon end cap.
This is a direct bolt on to the standard R3 headers. Just remove the stock silencer and exhause cover and fit the TYGA silencer.
This silencer looks great, significantly reduces weight without adding any noticeable volume.
(May not comply with noise regulations for some states and territories).
Note: This product is supplied with a genuine replacement exhaust gasket to fit where the TYGA pipe joins the Yamaha header pipes. It does not include the special high temp resin exhaust guard BPCC-7033.If you require the exhaust guard to complete the transformation, please order set EXPS-0060 and save money over ordering individual parts.
TYGA no: EXSL-0056
SKU: yam-10048 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Shop, Yamaha, YZF-R25/R3Decal set, type 4 Blue Metallic scheme, Honda MSX125 GROM
€46.17
Decal Set, MSX125, Type 4, 2014 Blue Metallic Scheme. This set comprises of a complete set of all the OE Honda decals required for the painted panelson the MSX125. Note it includes the decal ‘MSX125’ not ‘Grom’ as used in some markets.
TYGA no: STIC-0026U
SKU: MSX-10230 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, Shop