Rear wheel spacer kit aluminium, Suzuki RGV250
€76.31
Replace the heavy steel rear wheel spacer and wheel bearing distance spacer on the VJ22 with these lightweight 6061-T6 aluminium spacers. At 35% of the weight of standard they’re just what you need for easier wheelies!
TYGA no: TPER-0054
SKU: suz-10090 Categories: ALL products, CNC parts, CNC parts, RGV250 VJ22, Shop, SuzukiSet, Pipe, R.H Exit, Full Race System, VFR750F, 3rd Gen,90-93 (No Silencer)
€1,010.86
TYGA no: EXPS-0151
SKU: hon-11341 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93Exhaust hanger stay left, Aprilia RS250
€65.59
moet nog 40
TYGA no: TYLY-0052
SKU: apr-10001 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Exhausts, Exhausts, RS250, ShopSubframe, GP Race Tail, NSR250, Assy.
€123.00
This strong but lightweight subframe replaces the stock item when used as part of the NSR250GP Race Tail kit. Essential for mounting the seat cowl, this component is supplied with all brackets and mounting points to substitute this for the OEM Honda item. Supplied with a lightweight undertray and stainless steel bolts to attach the tank and regulator/rectifier as well as cable ties for securing the wiring.
Compatible Parts:
Only to be used with NSR250 GP Race Tail kit, BPFT-9002 MC21 seat cowl, BPFT-90012 MC28 seat cowl, subframe TYLY-0007, battery box TYLY-0006, seat pad BPSP-0001, Taillight BPLT-0008 and plate holder BPFX-9006, recommend BPAC-0001 rear brake reservoir kit
TYGA no: TYLY-0007
SKU: hon-10827 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250, NSR250 MC21, NSR250 MC28Turn signal relay LED , 1990 Honda
€18.19
Turn Signal Relay, Replacement for Honda 1990s Type.
Electronically speed controlled flasher relay especially designed to be used with LED turn signals. This unit will flash at the correct speed regardless of the wattage of the turn signals so it can be used with stock fronts and LED rears, all LEDs or even all stock.* Easy to install, plugs and plays where the stock Honda one is installed. Re-use the stock Honda rubber sheath for mounting it.
*For some Hondas such as the MC21, NC30 and NC35, this relay works fine with 2 LED turn signals installed or with all four of the stock turn signals installed. However, if 4 LED turn signals are installed, then you need to install one of the following in the wiring harness:
TYGA no: TELC-0002
SKU: hon-10580 Categories: ALL products, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R MC19, CBR250RR MC22, CBR400RR NC23, CBR400RR NC29, CBR900RR 1992- 95, Honda, NR750, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, RVF400RR NC35, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750R RC30, VTR1000Sp1SP2Triple Clamp Set, CNC Silver, NC35 Forks to fit MC28
€588.29
CNC machined TYGA triple clamp set for the MC28 to take NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-0741
SKU: hon-10786 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35Kitaco big throttle body kit 181cc NEO
€365.21 €314.49
Kitaco big throttle body kit 181cc NEO
High performance with high quality and durability.
This kit comes complete with filter, intake manifold, brackets.
All parts you need to install it on your Honda MSX125 Grom.
This kit is specially designed for the Kitaco NEO Big bore kit.
TYGA no: 403-1432100
SKU: MSX-10372 Categories: ALL products, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020 Tag: Honda MSX Kitaco NEO kit blackSet full race system with carbon silencer, Honda MSX125 GROM
€509.76
Set, Pipe, Full Race System, MSX125 Grom, Carbon Oval/Carbon End Cap. First Generation.
This full race system has been specifically designed for the MSX125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too!
Total weight of the set is 2100 grams
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0043), and Carbon Silencer (EXSL-0042).
A useful gain all through the range, increasing as the revs rise up to maximum.
Similar Products:
Please also see:
EXPS-0042 Moto Maggot System
EXPS-0052 Stainless Oval Silencer System
EXPS-0066 Carbon Oval High level System for 2016 MSX125SF second generation Grom
Compatibility:
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: EXPS-0041
SKU: MSX-10132 Categories: ALL products, Exhausts, Honda, MSX125 2013 - 2015, Shop