Top end rebuild set Cylinder A, Honda NSR250 MC21/MC28
€293.88
The picture shows everything you need to do a top end rebuild on your MC21/28. One kit includes all parts for one cylinder (cylinder ‘A’). To overhaul both cylinders please order 2 kits.
Honda OEM:
1x Gasket cylinder 12192-KV3-680
1x Gasket head 12251-KV3-830
1x Piston ring 13010-KV3-305
1x Piston B mark 13102-KV3-830
1x Piston pin 13111-KV3-771
1x RC valve shaft E clip 90601-KV3-000
1x Bearing piston 91102-KV3-771
1x Seal, RC valve shaft 91201-PA9-004
2x Dowel cylinder 94301-10160
2x Piston Circlip 15mm 94601-15000
There are different kits depending on the piston supplied and the pistons are sized to match the cylinder. The cylinders have a letter stamped on them. A cylinder = B piston B cylinder = no mark piston, C cylinder = D piston. The largest cylinder bore is A and the smallest is C. However, note that this is only for when cylinders are new or in good condition, so if the cylinder is worn, the corresponding piston will be a looser so a bigger piston might be advised. If the cross hatch honing of the cylinder is very feint then we suggest using the next size up piston. The differences in sizes are tiny (11 microns between largest and smallest) and for the most part not an issue so it is not a problem if a smaller piston is used in a larger cylinder or the other way round.
Cylinder A = 54.008mm – 54.011mm use Piston B = 53.966mm – 53.969mm
Cylinder B = 54.004mm – 54.008mm use Piston # = 53.962mm – 53.965mm
Cylinder C = 54.000mm – 54.004mm use Piston D = 53.958mm – 53.961mm
Piston to bore clearance = 0.039mm – 0.045mm
TYGA no: NHPS-0001A
SKU: hon-10439 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopRear sprocket aluminium gold, KTM Duke 125/200
€67.41
Upgrade your bike with TYGA Sprockets.
Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.
TYGA no: TYSR-0113-38 - TYSR-0113-46
SKU: ktm-10009 - ktm-10017 Categories: ALL products, By product, Duke 125/200 2012- 16, KTM, Sprockets, SprocketsSeat cowling stock shape painted RR, Honda RVF400 NC35
€419.72
Seat cowling stock shape painted RR, Honda RVF400 NC35
Stock shape seat cowling with or without taillight holes. Single seat, direct replacement for stock NC35 seat cowling in the same shape but with the exact top part of the RC45 single seat replacing where the passenger seat was. This seat cowling uses OEM seat pad. Please specify if you would like taillight holes and taillight mount made for no extra charge. If we receive no comment, we will send with taillight holes and mounts.
Compatible Parts:
All Tyga Performance and Honda OEM panels. Retains use of Honda OEM taillight and seat pad
Painted in classic RR scheme (1994-95). This panel is finished to match the stock paintwork
TYGA no: BPFT-9004 (Painted RR)
SKU: hon-10515 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopTyga Step Kit Replacement Right Side Hanger, (Adj.) CBR250R/CBR300R Assy.
€65.91
Tyga Step Kit Replacement Right Side Hanger, (Adj.) CBR250R/CBR300R Assy.
Replacement right hanger for your TYGA Step Kit. Complete with mounting bolts. Note this is for the adjustable type. See STAH-0018 for non adjustable fixed type.
Shroud left yellow, Honda MSX125 GROM
€32.45
Shroud left yellow, OEM Honda part
TYGA no: 83490-K26-900ZF
SKU: MSX-10324 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopTop Triple clamp nut M33, NC30
€19.05
Top clamp nut machined from 7075 T6 aluminium. Light weight and good looking. Clear anodised for a long lasting finish.
This nut is a direct replacement to the top nut on many Honda machines, such as NC30 VFR400R, RS250, RC30 VFR750R. The list is long.
TYGA no: TYLY-0037
SKU: hon-10116 Categories: ALL products, CNC parts, CNC parts, Honda, RS250R NF5 / NX5, Shop, Various parts, Various parts, VFR400RR NC30, VFR750R RC30Set, Pipe, Full Race System, High Level, MSX125 2021-, Moto Maggot
€451.95
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
Carbon airbox lid for race airbox, Aprilia RS250 Mk1/Mk2
€64.13
Carbon airbox lid for race airbox, Aprilia RS250 Mk1/Mk2
This airbox cover fits both Aprilia’s Mk1 and Mk2.
TYGA no: special030
SKU: apr-10098 Categories: ALL products, Aprilia, Bodykit replacement parts, High performance, High performance, RS250, Shop