Side cover right Red, Honda MSX125 GROM
€39.31
Side cover right Valentine Red, OEM Honda part
TYGA no: 83530-K26-900ZB
SKU: MSX-10118 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopUpper cowling track , Honda VFR750 RC30
€253.86
Upper cowling “track”, Honda VFR750 RC30 (hon-10568)
Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.
Bracket front brake CNC silver 84mm Brembo, Honda MSX125 GROM
€33.06
Bracket, Front Brake, 84 mm Brembo Conversion, Silver, MSX125 Grom
This is to fit the 84mm pitch rear caliper.
Also available in black (TYLY-1098)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
Photos show black version installed on bike
Only suitable for the non ABS models
TYGA no: TYLY-0098
SKU: MSX-10127 Categories: ALL products, By model, CNC parts, CNC parts, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, ShopCarbon front fender stock shape, Honda MSX125 2021 –
€264.55
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: BPCF-7048
SKU: msx-10476 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2021-, ShopSplitpen pro arm
€2.49
This R-Clip is a simple and racey look alternative to the standard slip pin used in the rear wheel axle of all Honda Proarms.
TYGA no: NUBO-0001
SKU: hon-10119 Categories: ALL products, Honda, NSR250 MC28, RVF400RR NC35, Shop, Universal parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750R RC30Carbon seat cowling, stock shape, NXA RS250R (2001- ’08)
€908.01
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Handlebar Clamp, Left, Black, CBR250R
€92.83
Replacement left handlebar clamp for handlebar set TYLY-1469
Blanking plate set valve, RC36-2 RC30 style
€16.11
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: TPER-0336
SKU: hon-11453 Categories: ALL products, chassis & fittings, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist