Handle bar clamp left ” hinge type” black, KTM RC390 2014 -24
€106.61
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1731L
SKU: ktm-10213 Categories: ALL products, CNC parts, CNC parts, CNC parts, Exhausts, KTM, RC 125/200, RC 390, RC390 2022-, Stock list, all modelsKit, complete bodywork with front fender GRP stock shape, Honda VFR750 RC30 (Jap spec)
€1,022.73
Upper cowling “stock”, Honda VFR750 RC30 (hon-10569)
Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.
Blank, Booster Bottle, MC21 (pair)
€6.26
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: TYLY-0074
SKU: hon-11255 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250 MC21, NSR250 MC28, ShopStay, Horn, Carbon, NSR250 MC21/MC28
€35.12
Stay, Horn, Carbon, NSR250 MC21/MC28
This lightweight carbon Horn stay replaces the stock item that the bike is supplied with (Honda OE part nr: 38115-KV3-830)
Fits:
Honda NSR250 MC21
Honda NSR250 MC28
TYGA no: BPCC-0066
SKU: hon-11208 Categories: ALL products, Honda, NSR250, NSR250 MC21, NSR250 MC28, Various parts, Various partsBelly Pan Race/street (GRP, white Paint), WSS300 TYGA version, KTM Duke125/200/390 2017-
€358.08
Step Kit (Street), (Adjustable), KTM 390 Duke
Designed in-house by TYGA Performance using the latest CAD/CAM software, these CNC machine-made step kits are made from top quality aircraft grade aluminium. Complete with carbon heelguard on left and right hanger.
Race shift possible by reversing the gear change arm. No other modification necessary other than adjustment of the link rod.
Peg position is 25/40mm. up and 15/30mm. back*.
Brake light is operated by standard pressure switch.
Provision for the side stand is provided.
Fitting the TYGA Step Kit for the KTM 390 Duke requires that the swingarm axle be removed from the machine, which can render the vehicle unstable. Having an assistant can be very useful during removal and fitting of the axle.
Seat cowling set GP500, NSR250 MC21/MC28
€297.76
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFS-0209
SKU: hon-11284 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250, NSR250 MC21, Shop, Silencersquick lock cap and O ring, TYGA filler
€25.00
<p><strong><span>Tank Filler Cap, Keyless, Racing Type, KTM, 7 Hole</span></strong></p>
<p><span>This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves</span></p>
<p><span>Supplied complete with seals and mounting hardware, it can be installed in minutes.</span></p>
<p><span>This product is suitable for KTM RC series sports bike models (RC125/200/250 and 390)</span></p>
<p><span>Fits all KTM RC models which are using the OEM filler cap with code: 90507008000 (2014-2016) but also may fit on later models using a 7 hole filler cap.</span></p>
<p><span>Suitable for the following models:</span></p>
<p><span>KTM</span></p>
<ul>
<li><span>KTM RC125</span></li>
<li><span>KTM RC200</span></li>
<li><span>KTM RC250</span></li>
<li><span>KTM RC390</span></li>
**** Please check photo 2 ****
</ul>
TYGA no: lock-0001
SKU: alg-10418 Categories: ALL products, CNC parts, CNC parts, Honda, Monkey 125 2018-, MSX125 2021-, MSX125 GROM, MSX125SF 2016 -2020, NSR125 JC22 1994 - 2003, NSR150SP, NSR250, NSR250 MC21, NSR250 MC28, RC 125/200, RC 390, RGV250 VJ21, RGV250 VJ22, RS250, RVF400RR NC35, Shop, Suzuki, Suzuki RGV250, Tank fillers, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Exhaustset race Stainless steel, aluminium silencer, Honda CBR250R
€411.44
The TYGA Full Race System has been designed with maximum power mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. For unsurpassed looks, sound and performance, this system is supplied with silencer EXSL-0040. If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only 3 kg instead of the 8 kg of the stock system
TYGA no: EXPS-0030
SKU: hon-10304 Categories: 4 stroke exhaust sets, ALL products, CBR250R 2011 - 15, Exhausts, Exhausts, Honda, Shop