Bracket rear brake, 84mm Brembo conversion Silver, Honda MSX125 GROM
€100.41
Bracket, Rear Brake, 84mm Brembo Conversion, Silver, MSX125 Grom
This is to fit the 84mm pitch rear caliper.
Also available in black (TYLY-1093)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
TYGA no: TYLY-0093
SKU: MSX-10079 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, Honda, MSX125 2013 - 2015, MSX125 2021-, MSX125SF 2016 -2020, ShopHandlebar Tube (Assy), Black
€22.89
Handlebar Tube (Assy), Black. Suitable for both left and right sides for CBR500R
Comes fitted with plastic bungs in each end.
Silencer stainless round, WSS300 (street) system, KTM RC390
€384.78
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXSL-0074p
SKU: ktm-10145 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsLower Cowling, GRP, NC30, Stock Shape, Painted Type 1
€441.95
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPFL-0003Btype1
SKU: hon-11410 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30Meterstay aluminium Race , Honda VFR400 NC30
€202.46
Meter Stay, NC30, Race, Stock Type, Assy
This meter stay to be used with all stock shaped bodywork. It is the same dimensions as Honda part 64501-MR8-000 and TYGA part TYLY-0016 but is designed with track use in mind . Made from aluminium and designed without any headlight mounts, this simple and lightweight stay is suitable for race and track day applications.
Compatible with stock Honda NC30 bodywork and TYGA parts BPFU-1021 and BPFS-0139
TYGA no: TYLY-0250
SKU: hon-11215 Categories: ALL products, Honda, Shop, Various parts, VFR400RR NC30Section, Pipe, Stainless, CBR125
€149.30
CBR125 Pipe. Silencer not included.
Carbon engine covers left 2016 – , KTM Duke / RC390
€120.42
Engine Cover, (Carbon), Left, KTM Duke 250/390 RC250/390, 2016-2018 1
Engine Cover, (Carbon), Left, KTM Duke 250/390 RC250/390, 2016-2018 2Engine Cover, (Carbon), Left, KTM Duke 250/390 RC250/390, 2016-2018 3
Engine Cover, (Carbon), Left, KTM Duke 250/390 RC250/390, 2016-2018
This engine protective cover is made from lightweight carbon with an abrasion resistant inner layer of Kevlar. Now requirement for many racing classes and a sensible and attractive addition to a road bike.
Note: This product does not fit the 2014-2015 model KTM RC390 due to a revised design of the left side engine cover, please see BPCC-7331L for 2016-2018 type
TYGA no: BPCC-7531L
SKU: ktm-10080 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, Duke 390 2017 -, KTM, RC 390, RC390 2022-Front wheel spacer kit aluminium, Suzuki RGV250
€33.23
Replace the heavy steel front wheel spacer and wheel bearing distance spacer on the VJ22 with these lightweight 6061-T6 aluminium spacers. At 35% of the weight of standard they’re just what you need for easier wheelies!
TYGA no: TPER-0053
SKU: suz-10084 Categories: ALL products, CNC parts, CNC parts, RGV250 VJ22, Shop, Suzuki