Side Cowling, Left, Race, Carbon Clearcoated, KTM RC390 WSS300
€454.95
Side Cowling, left, Race, Carbon Clearcoated KTM RC390 WSS300
Replacement Side Cowling, Left, GRP, Race, WSS300, MUST be used with KTM WSS300 hardware
see also:
BPFU-7331R (GRP)
BPCU-7331UR (Carbon Unpolished)
Fairing set style RVF, NC30 NC35
€425.07
A cheaper alternative to our RC211V style kits, this set of bodywork consists of race upper cowling, Race Lower Cowling with closed bottom and NC35 screen SCRE-0041. Ideal for track days or race bikes which are stock or need to keep stock to comply with racing regulations. The panels are top quality, being lightweight, flexible and tough. Constructed with epoxy resin and multi layer cross weave mat; do not confuse this with budget race glass made with polyester and chopped strand just because the price is right!
This fairing will also fit the NC30, though front and upper stays will need to be modified to fit.
Please state if you would like a tinted screen or stock shape open lowers (BPFL-0003) and we will be happy to change to suit
Please note that the fairings only weigh approx. 1kg for each panel and to ensure a safe delivery, the box they are sent in weighs 4 kg. You may want to consider two sets and save on shipping…
TYGA no: BPFS-0023
SKU: hon-10076 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Crankshaft Bearing, C , NSR250 MC21/28
€213.11
Crankshaft Bearing, Left, NSR250 MC21/28
Genuine OEM KOYO main crankshaft bearing for your Honda NSR250 MC21/28.
See also TYPP-0012SET for set consisting of one each of the left, centre and right crank bearings.
TYGA no: TYPP-0012C
SKU: hon-10759 Categories: ALL products, Honda, NSR250, NSR250 MC21, NSR250 MC28, Various parts, Various partsCarbon seat cowling stock shape street single, Honda NSR250 MC28
€673.59
Seat Cowling (Carbon), NSR250 MC28, Stock Shape, Street Assy.
This lightweight seat cowling is a direct replacement for the stock plastic seat cowling and is exactly the same shape. Unlike the plastic part, it doesn’t have joins between the sides and the tail piece and it can even be ordered without the passenger seat pad strap holes to give a factory race look. There is no compromise in practicality though, and the panel features the luggage door and all mounting tabs for the taillight, duct shroud and luggage bracket. It can be used with stock Honda parts or TYGA parts such as BPCX-0001 and BPCC-0013 (shown in some of the photos below).
Note: BPCT-0007B luggage door is included and can also be ordered seperately.
TYGA no: BPCT-0007
SKU: hon-10561 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC28, ShopTail light cover, Aprilia RS250 Tyga
€17.20
This cover is made specifically for the TYGA bodywork kit (BPFS-0103). Fills in the light holes to make a smooth seat cowling for race use.
Not suitable for the stock bodywork
TYGA no: BPFX-9330Â
SKU: apr-10043 Categories: ALL products, Aprilia, Bodykit replacement parts, Bodywork, RS250, ShopSilencer kevlar/carbon SHORTY 60mm 2 stroke
€156.20
This high quality shorty (55mm shorter than our other silencers) lightweight silencer (0.40kg) is made from CNC machined end caps joined by a Carbon/Kevlar fiber tube. It has a built-in sealing ‘O’ ring and is supplied with stainless steel bolts and washers for fitment.
Note this product is intended to be used with our exhaust chambers (EXCS-****) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber.
Compatible Products:
All Tyga Performance Two Stroke chambers sets. Remember to order the correct number of silencers for a complete system!
Other Alternative Products:
EXSL-0065 Shorty Carbon
EXSL-0067 Shorty Aluminium
EXSL-9005 Aluminium
EXSL-0003 Carbon
EXSL-0004 Carbon/Kevlar
TYGA no: EXSL-0066
SKU: alg-10259 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, ShopRacing stepkit black/SILVER adjustable, Honda Monkey 2018
€477.27 €395.87
Racing Rear Set Kit, Adjustable, Black, Monkey 125
With all major components designed specifically for the Monkey 125 in mind, this rear set kit is the best on the market. Designed in-house by TYGA Performance using the latest CAD/CAM software, these tough CNC machine-made step kits are made from top quality, aircraft grade aluminium and utilise TYGA’s unique and elegant system to provide ten different foot peg positions. The kit features levers moving on ball bearings to give precise and smooth movement. In addition to the technical specifications, emphasis has also been given to make the steps as uncluttered as possible with the rear master cylinder hidden from view and no unsightly unused holes on view etc. The kit comes complete, ready to bolt on with stainless steel fasteners, new OEM Honda axle bolt and carbon heel guards. With individualism in mind, there is a choice of ten colour combinations available and all components are available as replacement or separate items.
Notes:
No real brake light provision. If required, we recommend installation of inline pressure switch.
Fitting this rear set requires replacing the axle bolt with a slightly longer one, a new orginal OEM honda axle bolt is included
This rear set cannot be used in a reverse (GP) shift pattern
TYGA no: STAA-1027SILVER
SKU: msx-10425 Categories: ALL products, CNC parts, Honda, Monkey 125 2018-, ShopSet pipe “slip on’ Mesh slash cut” stainless, KTM Duke 390
€168.73
Set, Pipe, Slip On, Mesh, Slash Cut, KTM 390 Duke
Hand welded from stainless steel, this is a direct bolt on to the standard 390 Duke . Just remove the stock silencer and fit the TYGA silencer.
This silencer looks great, significantly reduces weight without being too loud due the cat box reducing noise significantly before it reaches the tail pipe. Nevertheless, this product may not comply with noise regulations for some states and territories).