Dash Indicator Bulb Harness, NC30/35
€17.20
This product plugs in line with the wiring connector that connects to the main harness from the left hand handlebar switch and allows the turn signal instrument warning light to function properly when LED turn signals and turn signal relay TELC-0002 are installed. Without this harness, the LED turn signals and turn signal instrument warning light will not flash properly. To install simply unplug the connector at the front of the bike near the master stay and install the TYGA mini harness in line.
TYGA no: TYWH-0002
SKU: hon-10756 Categories: ALL products, Honda, RVF400RR NC35, Various parts, Various parts, VFR400RR NC30Carbon exhaust guard TYGA, Yamaha R25 – R3
€63.97
Exhaust Guard, TYGA Slip On, Yamaha R25/R3
Made from specially formulated high temperature resin, this exhaust guard adds the finishing touches to the TYGA Performance slip-on exhaust transformation. Fits in minutes and adds a factory GP touch to your bike.
Note, this product is only suitable when used with TYGA Performance R25 and R3 slip-on exhaust systems EXPS-0059 and EXPS-0060
Section final stainless “RH exit, VFR750F gen 3 and 4, 90-97
€116.77
Section, Final, R.H Exit, Stainless, VFR750F Gen 4, ’94-’97:
Used on: Right Hand Exit Full Race Systems, VFR750R, Gen 4
EXPS-0131 Set, Pipe, Full Race System, R.H Exit, VFR750F, Gen 4, ’94-‘9, (No Silencer)
EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer, VFR750F, Gen 4, ’94-’97
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer, VFR750F, Gen 4, ’94-’97
EXPS-0134 Set, Pipe, R.H Exit, Full Race System, Oval Carbon/Carbon End Cap Silencer, VFR750F, Gen 4, ’94-’97
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer, VFR750F, Gen 4, ’94-’97
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer, VFR750F, Gen 4, ’94-’97
TYGA no: EXPT-9119
SKU: hon-11038 Categories: ALL products, exhaust system replacement parts, Exhausts, Honda, Shop, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97Set, pipe full race system round carbon silencer LH exit, VFR750F gen 4, 94-97
€1,193.94
Set, pipe full race system round carbon silencer, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system can be used with a number of our 2″ slip on exhaust silencers
See also our sets with silencer included:
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand, however, the centre stand and pillion foot rests must be removed prior to installation.
TYGA no: EXPS-0125
SKU: hon-11018 Categories: ALL products, Exhaust systems, Exhaust systems, Exhausts, Honda, RC36-2 -> RC30 replica products, Shop, VFR750F Gen 4, 94-97Exhaust Gasket, Spring, NSR150/250
€66.78
Exhaust Gasket, Spring, NSR150/250
TYGA no: 18293-KV3-004
SKU: hon-11163 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, New OEM Honda parts, New OEM Honda parts, New OEM Honda parts, NSR150SP, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28lower cowling (GRP), stock shape NSR250 MC21/MC28
€241.47
Lower Cowling (GRP), NSR250, MC21/28, Stock Shape, Assy
This part is a direct replacement for the OEM Honda left, right lower, right mid and inner cowls and has the ‘shark fin’ and front ducts retained. Compatible with stock and Tyga exhaust systems.
Compatible Parts:
Can be used with the following upper cowlings: MC21 and MC28 OEM upper cowling, Tyga upper cowlings: BPFU-0001, BPFU-0002, BPFU-0003, BPFU-0006, BPFU-0007, BPFU-0008 and BPFU-0022
See also
BPFL-0001 for similar product
TYGA no: BPFL-9001
SKU: hon-10915 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28VHM Cyl. headset Yamaha YZ125 ’05-
€271.95 €256.04
VHM Cyl. headset Yamaha YZ125 ’05-> (alg-10202) AA33077VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.We are pleased that we can offer VHM products on our website.VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:1x cylinder head1x standard insert (11.00cc)Optional inserts:– blind– 10.80– 11.00– 11.20This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.Note: please put in comment box, the year of your bike and what size insert you want (no comment is STD insert).Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AA33077Â Â Â Â Â Â Â Â
SKU: alg-10202 Categories: ALL products, Motocross, Shop, VHM products, Yamaha, Yamaha MXCarbon Front fender, Aprilia RS125 (2007-2010)
€208.08
This is a stock shaped fender for the 2007-2011 Aprilia RS-125 complete with mounting holes pre drilled for ease of fitment.
Weighs a fraction of the stock one at approx. 240g.
Let your bike stand out from the crowd with this beautiful carbon product
TYGA no: BPCF-7107
SKU: apr-10009 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS125, Shop