Rear sprocket aluminium gold, Honda CBR500
€67.41
Upgrade your bike with TYGA Sprockets.
Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.
TYGA no: TYSR-0111-40T - TYSR-0111-43TÂ
SKU: hon-10331 - hon-10334 Categories: ALL products, By product, CBR500R, Honda, SprocketsCarbon fairing set street GP-T, Honda NSR250 MC21/MC28
€1,780.94
Kit, Fairing Set, Carbon, (Street), NSR250 GP-T
This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NSR250. As well as bringing the NSR250 up to date, it also offers huge weight saving and easy fitment and removal. Similar to a GP bike, the fairing is held on by R clips and nylon bungs for quick release. The kit is supplied with all mounting hardware including carbon fiber side stays and aluminium upper and front stays. The headlights used in this kit, are LED and consist of two units either side with 2 on low and 4 on high beam. The system uses a lot less current than conventional halogen systems while at the same time being discrete but stylish. Please note that the headlights do not comply with road use regulations and are unsuitable for high speed riding on unlit roads.
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
As well as this fairing BPFS-0138 which is made using carbon fiber panels finished in high gloss UV protective clearcoat, we offer a similar product using GRP (glass reinforced plastic) which is primed and ready for paint**. See BPFS-0137
* A clear screen is provided unless you specify tinted in the comment box at check out.
** We recommend trial fitting and making and minor adjustments before painting
TYGA no: BPFS-0138
SKU: hon-10530 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, NSR250 MC28, ShopCowling left black, Honda MSX125 GROM
€23.35
Cowling left black, Honda MSX125 GROM (msx-10014)
OEM Honda part
TYGA no: 77225-K26-900ZA
SKU: MSX-10014 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopSeat set race GP-T, Honda VFR400 NC30
€968.19
The ultimate seat set for your V4 Honda!
This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NC30. As well as bringing the NC30 up to date, it also offers huge weight saving and easy fitment and removal. The seating position is higher and roomier compared to the stock NC30 postition, bringing it into line with modern sports bikes ergonomics. The seat pad is designed to give plenty of feedback for race use and the cowling has plenty of space for tucking in behind the fairing along the straights. The seat cowling is designed so that the fuel tank can be removed while leaving the seat cowling installed, allowing for quick jetting changes etc.
The kit is supplied with all mounting hardware including subframe and battery box.
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
** We recommend trial fitting and making and minor adjustments before painting
TYGA no: BPFS-0165
SKU: hon-10631 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, VFR400RR NC30Tyga Step Kit Replacement Link Rod, 215mm
€16.92
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: STAR-0215
SKU: alg-10427 Categories: ALL products, Carbon, CBR250R 2011 - 15, CBR300R 2014-, Honda, NSR150SP, RVF400RR NC35, Shop, Various parts, Various parts, Various parts, various parts, Various parts, Various parts, VFR400RR NC30, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97Kit, GRP, Complete bodywork set with Fuel Tank and Front Fender, painted Repsol, MC21, MC28 NSR250V
€3,668.44
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: BPFS-250VREPSOL
SKU: hon-11411 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopRacing stepkit black/BLACK adjustable, Honda MSX125 GROM
€477.27 €395.87
Racing Rear Set Kit, Adjustable, black with BLACK Slot Cover, MSX125 Grom
With all major components desgined specifically for the MSX125 Grom in mind, this rear set kit is the best on the market. Designed in-house by TYGA Performance using the latest CAD/CAM software, these tough CNC machine-made step kits are made from top quality, aircraft grade aluminium and utilise TYGA’s unique and elegant system to provide ten different foot peg positions. The kit features levers moving on ball bearings to give precise and smooth movement. In addition to the technical specifications, emphasis has also been given to make the steps as uncluttered as possible with the rear master cylinder hidden from view and no unsightly unused holes on view etc. The kit comes complete, ready to bolt on with stainless steel fasteners and carbon heel guards. With individualism in mind, there is a choice of ten colour combinations available and all components are available as replacement or separate items. Be sure to order the correct colour combination. Some photos below are for reference and show different colours to this product.
Note, no real brake light provision. If required, we recommend installation of inline pressure switch.
You can only use these steps on the MSX125SF if you have a TYGA exhaust
<a href= {{media url= wysiwyg/05-fitting-msx-step-kit-online-6e1bce74.pdf }} target= _self >Click here for fitting instructions</a>
TYGA no: STAA-1019BLACK
SKU: MSX-10244 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Steps, StepsBrake Lever, MC28
€118.57
Brake Lever, MC28
TYGA no: 46500-KV3-830
SKU: hon-11145 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28