Exhaustset stainless steel carbon silencer round, Honda CBR150
€520.76
This full race system has been specifically designed for the CBR150 to maximise power. Made in stainless steel with spring mounted carbon silencer this system significantly increases performance, saves 4.8 kg in weight (TYGA system 1.4 kg, stock system 6.2 kg!) and enhances the looks of the bike. Sounds great too!
TYGA no: EXPS-0008Â
SKU: hon-10286 Categories: 4 stroke exhaust sets, ALL products, CBR125R/CBR150R 2004-10, Exhausts, Honda, ShopCarbon rear hugger, KTM RC125/RC200/RC390 2022-
€113.63
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPCH-7031B
SKU: ktm-10206 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all modelsCarbon end cap YZ250 silencer
€37.18
Tail Pipe, Stainless Steel, YZ250.
This link pipe is used in conjunction with the silencer, and is specific to the Yamaha YZ250
This product is compatible with EXCB-0032 and EXSL-0050 which together make up complete exhaust system EXTS-0001
TYGA no: EXCC-0007
SKU: alg-10142 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Motocross, Shop, Yamaha, YZ250 2005-15Honda VFR400 NC30 screen
€49.05
Honda VFR400 NC30 screen
This screen fits the original bodywork.
TYGA no: screenvfr400
SKU: hon-10319 - Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, VFR400RR NC30Front Fork Preload Adjusters (Pair), ninja 400
€200.55
Front Fork Preload Adjusters, Pair, Ninja 400
These fully functional preload adjusters replace the blank end caps on the stock Ninja 400 front suspension. These caps allow the rider to increase the amount of preload on the internal springs, allowing for a better set up for your riding style or conditions. Essential for spirited riding through the twisties or track days and racing.
This modification allows preload to be increased from the stock setting by 12mm. The minimum setting gives the same preload as stock.
Supplied in red and blue anodised finish, these adjusters are as beautiful as they are functional.
TYGA no: TYLY-0099k
SKU: kaw-10100 Categories: ALL products, Exhausts, Kawasaki, Ninja 400R 2018-, Various partsSeal, Crank L., MC28
€9.77
Seal, Crank L., MC28
TYGA no: 91205-KV3-771
SKU: hon-11111 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28Decal set, type 3 Pearl valentine red scheme, Honda MSX125 GROM
€46.17
Decal Set, MSX125, Type 3, 2013 Pearl Valentine Red Scheme. This set comprises of a complete set of all the OE Honda decals required for the painted panelson the MSX125. Note it includes the decal ‘MSX125’ not ‘Grom’ as used in some markets.
TYGA no: STIC-0026R
SKU: MSX-10115 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopUpper stay, Tyga Gp MC18/MC21/MC28
€70.24
Lightweight GP style upper stay to use on the GP style fairing
Compatible Parts
Upper cowlings, BPFU-0004, BPFU-0005, BPFU-0015 and BPFU-9012. For use with MC18, MC21 and MC28 models only
TYGA no: TYLY-0001
SKU: hon-10253 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, By model, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop