Silencer, Carbon/Carbon End Cap, Oval, Slip-On, RVF400, Assy.
€476.54
This easy to fit bolt on silencer replaces the stock heavy aluminium one on the stock system and is an alternative to the more expensive full race system. Constructed from lightweight carbon fibre with carbon exit cap, and aluminium mount cap, it fits in minutes using the original hardware. Stainless steel mounting clamp is provided when you purchase this product.
Note, this silencer may not be legal for some states and territories
Carb Service Kit, 12 pieces, Honda NSR250 MC28
€43.36
Carb Service Kit, 12 pieces, Honda NSR250 MC28
LiteTek Carburettor Seal Kit to suit: Honda NSR250 MC28
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
2x FB-032 Float Bowl Seal, Material: Flourosilicone (Part of Honda kit: 16010-KV3-950)
2x FB-033 Top Cap O-Ring, Material FKM (Part of Honda kit: 16010-KV3-950)
2x OR-009 Drain Screw O-Ring, Material: Viton 70A (Part of Honda kit: 16010-KV3-950)
2x OR-014 Fuel T-Pipe O-Ring, Material: Viton 70A (Part of Honda kit: 16010-KV3-950)
2x OR-012 Float Bowl Vent O-Ring, Material: Viton 70A (Part of Honda kit: 16010-KV3-950)
2x CS-005 Choke Plunger Cap Material: Viton 70A (Part of Honda kit: 16046-KV3-950)
TYGA no: CKA-Honda-MC28
SKU: alg-10367 Categories: ALL products, Carburettor Service Kits,, Honda, NSR250, NSR250 MC28, Various partsShroud left yellow, Honda MSX125 GROM
€32.45
Shroud left yellow, OEM Honda part
TYGA no: 83490-K26-900ZF
SKU: MSX-10324 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopRubber Grommet type 3
€0.61
Mini LED turn signal lamps. Universal fitting. Bright but small and discrete, these units are easy to install requiring just one hole. Ideal for the finishing touch of any custom project. Please note that any LED turn signals draw a smaller current than most standard fitment ones and will need suitable flasher relay in order to flash at the correct speed.
TYGA no: 5045-001-00
SKU: alg-10421 Categories: 848 / 1098 / 1198, ALL products, Aprilia, Cagiva, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR250R MC19, CBR250RR MC22, CBR300R 2014-, CBR400RR NC23, CBR400RR NC29, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Ducati, Duke 125/200 2012- 16, Duke 390 2012-16, ER6N-F 2009-11, GSX-R1000 K5-K6, GSX-R1000 K7-K8, GSX-R1000 K9-K10, GSX-R1300 Hayabusa, GSX-R1400 Hayabusa, GSX-R600/750 K6-K7, GSX-R600/750 K8-K10, Honda, KSR110 2005- 10, Mito 125, Monster, MSX125 2013 - 2015, MSX125SF 2016 -2020, Ninja 250R 2008- 12, Ninja 250R/300R 2013 -, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RC 125/200, RC 390, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RSV125, RVF400RR NC35, Shop, Suzuki, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VTR1000Sp1SP2, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12, YZF-R125 2009-, YZF-R25/R3, Z125 2016-, ZX10R 2011 -15, ZXR250CMeter Stay Extension
€12.29
Replacement meter stay extension nylon shaft. Suitable for the following models:
BPFS-0012
BPFS-0019
BPFS-0032
BPFS-0033
See table for application of meter stay extensions with our body kits:
Carbon tank protector, Kawasaki Ninja 250/300 2013-18
€104.89
Carbon direct replacement for OEM Kawasaki item. Pre drilled for easy fitting. Compatible with:
2013- Ninja 250
2013- Z250
2013- Ninja 300
2013- Z300
TYGA no: BPCC-7032Â
SKU: kaw-10238 Categories: ALL products, Carbon, Kawasaki, Ninja 250R/300R 2013 -, ShopHandlebar Clamp, Right, Black, CBR250R
€92.83
Replacement left handlebar clamp for handlebar set TYLY-1469
Carbon fairing stay side 77mm (pair), Honda NSR250 MC21/MC28
€82.47
Fairing Stay, Side, Pair, Carbon
Designed to replaced fixed side stays these lightweight carbon fiber stays are supplied with nylon bungs and ‘R’ clips, for quick release. This product can also be used with many race fairings such as the TYGA Honda RSW and GP250 style or similar applications. See drawing for dimensions. Also see similar product BPSY-0143 Assy.
Dimensions:
BPSY-0143: length from centre of mounting hole to inside face of fairing with nylon bung = 87 mm.
BPSY-0143B: length from centre of mounting hole to inside face of fairing with nylon bung = 77 mm.
Compatible products:
TYGA upper cowlings, BPFU-0005, BPFU-9005, BPFU-9014
TYGA no: BPSY-0143
SKU: hon-10565 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various parts