Upper stay GP-T, Honda NSR250 MC21/MC28
€98.49
Upper Stay, NSR250, GP-T, Assy.
Lightweight GP style upper stay complete with plastic bungs and R clips for quick fairing assembly and removal.
Compatible Parts
TYGA upper cowlings, BPFU-9033 and BPCU-9033.
TYGA no: TYLY-0121
SKU: hon-10535 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork and carbon, Bodywork and carbon, NSR250 MC21, NSR250 MC28, ShopKit, Seat Set, GRP, (Race), MC21, MC28, NSR250V
€432.66
Kit, Seat Set, GRP, (Race), MC21, MC28, NSR250V
Modelled closely from the seat cowling taken off an actual NSR500V HRC factory machine, this seat cowling kit has been designed to faithfully reproduce the appearance and silhouette of the NSR500V but in proportion to the NSR250. This seat cowling set can be installed with both the MC28 and the MC21, (though to fit it on a MC21 you will need an MC28 fuel tank or TYGA Fuel tank BPCG-0001 or BPFG-0001). The set consists of the parts shown below and has special mounting hardware and seat pad provided.
We have designed the seat cowling so that for fuel tank removal, there is no need to remove the seat cowling, making for quick and easy jet changes and maintenance etc. Note, you do not need to change the subframe for either the MC21 or MC28 models to install this seat cowling which bolts to the stock subframe holes at the rear and special front lower subframe mounting positions with all hardware provided. The seat cowling has threaded holes in the underside to attach exhaust stays TYLY-0243L and TYLY-0243R for use with NSR250V exhaust system EXCS-0047
We recommend installing this seat cowling set with fairing set BPFS-0197 on the NSR250 to complete the NSR250V bodywork style. For a complete transformation of the whole bike, we also recommend exhaust system EXCS-0047 and EXSL-0083 or EXSL-0084.
TYGA no: BPFS-0198
SKU: hon-11057 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Set pipe, Full race with round aluminium silencer NEW, Kawasaki ZXR250 2013 –
€557.94
2013-2017, Set, Pipe, Full Race System, Ninja 250R, Round Aluminium Silencer
We now have a new and improved design to give you the edge in this highly competitive class. Through our continuous R&D, we have enhanced the dimensions of components to squeeze even more power from the Ninja 250 when used with the TYGA system*. Made in stainless steel with spring mounted round Aluminium silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! Unlike the stock system and most other aftermarket full systems, the TYGA Performance full race system is routed up the right side of the bike for the best possible gas flow and the performance figures support this. Please see below.
(* May not comply with noise regulations for some states and territories and may exceed noise regulations for some circuits)
This system is supplied with an Round Aluminium silencer EXSL-0040
Note, this exhaust system is not suitable for the 2008-12 model. For the 2008-12 model, please see EXPS-0018.
* Please also note that all TYGA-Performance pipe sections and silencers are new for 2017 and thus not compatible with previous 2013-2016 TYGA-Performance Ninja 250 Exhaust pipe sections and silencers.
Top triple clamp black set, CBR250 2011 –
€280.14
CNC machined top triple clamp with detachable ignition switch/lock holder for your CBR250R and 300R. Designed and manufactured in house as a direct replacement for the standard top triple clamp. Fully functional steering lock.
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp and key holder set offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.
TYGA no: TYLY-1069
SKU: hon-10187 Categories: ALL products, CBR250R 2011 - 15, CBR300R 2014-, CNC parts, CNC parts, CNC parts, Honda, ShopCarb Service Kit A, 40 pieces, Honda RVF400 NC35
€81.81
Carb Service Kit A, 20 pieces, Honda RVF400 NC35
LiteTek Carburettor Seal Kit to suit: Honda RVF400 NC35
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-002 Float Bowl Ring, Material: Flourosilicone (Part of Honda Kit No. 16010-MR8-900)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A (Part of Honda Kit No. 16010-MR8-900)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel
4x OR-009 Drain Screw O-Ring, Material: Viton 70A (Part of Honda Kit No. 16010-MR8-900)
4x OR-011 Needle O-Ring, Material: Viton 70A (Part of Honda Kit No. 16010-MR8-900)
TYGA no: CK-Honda-NC35
SKU: alg-10351 Categories: ALL products, Carburettor Service Kits,, Honda, RVF400RR NC35, Shop, Various partsCarbon sprocket cover, KTM Duke390 2017 –
€125.54
Carbon sprocket cover, KTM Duke390 2017 –
This lightweight carbon sprocket cover weighs less than the stock one and adds style to your ride.
Please note, this product fits the 390 Duke 2017 model.
Let your KTM Duke stand out from the crowd this beautiful carbon product.
KTM powerpart!
TYGA no: BPCC-7631
SKU: ktm-10172 Categories: ALL products, Bodywork and carbon, Carbon, Duke 390 2017 -, KTM, ShopFork Caps, Silver/Black, Full adjustment, Honda MC18/MC21/MC28/NC30
€249.74
Fork Caps, Silver/Black, Full adjustment.
Many race replica street bikes are graced with adjustable suspension as standard, but as with many ‘so-called’ adjustable suspension systems on production bikes, the actual adjustment available is very limited. The manufacturer lets you adjust within very tight parameters so that it’s difficult to get the settings wrong.
The TYGA fork tops do away with this dictator attitude, allowing you to take control of your set-up.
The preload adjustment is increased, with an extra 4mm possible, and we also provide a full 20 clicks of rebound adjustment that works!
Another great feature is the easy-turn knob for rebound adjustment. No more fumbling around for the screw driver.
The fork tops are manufactured from top quality anodized 6061 T6 aluminium and come ready to install, and are a direct replacement for the standard parts. Securing to the fork tube is by a pin spanner that is provided.
Basic suspension rebuild skills are useful for fitting, but full instructions will be provided.
Fits MC21SE/SP, MC28SE, MC18SP & NC30.
Also available in Blue/Red see TYLY-0038
Please note that these Fork Caps will not work with ‘R’ spec NSR forks, or ’89 NC30, as these are preload adjustment only type forks.
TYGA no: TYLY-1038
SKU: hon-10967 Categories: ALL products, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Section, Secondary A, R.H Exit, VFR750F, 3rd Gen, 90-93
€107.88
TYGA no: EXPT-7151
SKU: hon-11344 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93