Exhauststay left TYGA VJ21, Suzuki RGV250 VJ21
€52.50
This product is designed to be installed as part of our TYGA Seat cowling kit for the VJ21 Kit BPFS-0121 and substitutes for the stock passenger peg hangers. It retains the use of stock mounting hardware and there is a level of adjustability in the mounting position due to the slot for the clamp position.
This product can be used as a stand alone item and does not need the rest of the kit and is suitable for replacing passenger pegs on any race VJ21 for example.
Please note this product is ‘handed’ and you need one of each TYLY-0100L and TYLY-0100R for one bike.
TYGA no: TYLY-0100L
SKU: suz-10100 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ21, Suzuki, Suzuki RGV250Bearing, Countershaft, NSR250 MC18, MC21, MC28
€11.30
This NSK bearing is a high quality, direct replacement for OEM bearing 91024-KV3-003.
Extensively tested and used on many TYGA engines.
TYGA no: TYPP-0006
SKU: hon-10838 Categories: ALL products, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Universal parts, Various parts, Various parts, Various partsTYGA / Kitaco Power up kit stainless , Honda MSX125 GROM
€741.04 €666.94
TYGA/KITACO Power Up Kit, Stainless Type
This power up kit is designed to give a significant power boost over stock. Using TYGA Performance and KITACO products, the power of the MSX125 Grom is increased by 25%. Below is the dyno graph. STD vs our full system with carbon silencer, Kitaco type 2 camshaft, i-map (setting #3). Similar results were found with the Moto Maggot and stainess type silencers.
Parts
This product consists of the components shown below, namely:
EXPS-0052 Set, Pipe, Full Race System, MSX125 Grom, Stainless Oval/Carbon End Cap
KIT-300-1432010 KITACO Type 2 Camshaft
KIT-763-1432010 KITACO i-Map. Fuel Injection Controller
For those who want a Type 1 camshaft, please put this in the commentbox at check out.
Option:
KIT-763-0500900 i-Map interface cable. To adjust the i-map for special setting. Software available on KITACO website.
Description:
Fitting this Power Up Kit to your Honda MSX125/GROM gives a significant increase in top end performance and over rev. Peak hp is moved from 7,000rpm (std) up to 8,000rpm, with a 1.6hp gain at peak.
Fitting the i-Map Fuel Injection Controller is a necessary modification to avoid the engine running lean and being damaged. Running the KITACO Type 2 camshaft without the i-Map is NOT an option!
The wire harness requires modification and the documents are included with the kit, or can be viewed here: http://www.kitaco.co.jp/data/product/link/instaling_manual/kitaco_installing_manual_grom_imap.html
The i-Map is shipped with “setting #3” activated. This is the basic map for this kit, but the map can be modified using the optional i-Map interface cable and software downloadable from the KITACO website:
i-Map Fuel Manager: http://www.kitaco.co.jp/dlservice.html
TYGA no: TPER-0096
SKU: MSX-10304 Categories: ALL products, Exhausts, Exhausts, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopTYGA step kit replacement link rod 205mm, Y
€16.07
Tyga Step Kit Replacement Link Rod, Male, 205 mm.
Replacement gear link rod for your TYGA Step Kit. (Check application before ordering)
Uses M6x1 thread in one end and M6x1 L/H thread in the other, and includes both the nuts. 205 mm. in length.
TYGA no: STAR-0006
SKU: yam-10054 Categories: ALL products, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390, Stock list, all models, Yamaha, YZF-R25/R3Set, Pipe, Twin Exit System, High Level, MSX125 2021-, Stainless Oval/Carbon End Cap
€866.32
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
Front fender (grp) stock shape, Honda RS250R NXA
€80.91
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA bike dust cover Black/red Force V4 Honda wing
€76.13
TYGA Bike Dust Cover, Blue, Rothmans Honda
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
TYGA no: TMER-0170
SKU: hon-11315 Categories: ALL products, Bike covers, By model, Honda, Merchandise, Shop, Universal parts, Various parts, VFR400RR NC30Passenger seat cover red/flad black, Honda MSX125 GROM
€132.00
Passenger Seat Cover, (GRP), MSX125 Grom.
This is the GRP version of our MSX125 passenger seat cowling in red with flat black number board as shown in the photos. Easy installation, with mounting hardware and trim supplied, this stylish cover will clean up the lines of your bike and make your bike stand out from the crowd.
This seat cowling is also available as BPCX-7128 in carbon fibre. See website for more details.
<a href= {{media url= wysiwyg/02-fitting-manual-seat-cover-bpfx-cx-7128-online-72148956.pdf }} target= _self >Click here for PDF</a>
TYGA no: BPFX-7128 R/F
SKU: MSX-10149 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, Shop