Water pump shaft/gear, Honda NSR250 MC18/MC21
€255.37
Water Pump Shaft/Gear, MC18, MC21
High quality hard anodized aluminium gear, on precision ground shaft.
Manufactured by T2 Racing in Japan.
Direct replacement for the standard plastic shaft/gear which is prone to cracking and causing catastrophic failure.
The shaft and gear can be disassembled should any parts ever need replacing.
Note that this part is for MC18 and MC21 only. For MC28 please see TPER-5004
TYGA no: TPER-5003
SKU: hon-10622 Categories: ALL products, High performance, High performance, Honda, NSR250, NSR250 MC18, NSR250 MC21, Various parts, Various partsTyga Step Kit Replacement Right Side Hanger, (Adj.) CBR250R/CBR300R Assy.
€65.91
Tyga Step Kit Replacement Right Side Hanger, (Adj.) CBR250R/CBR300R Assy.
Replacement right hanger for your TYGA Step Kit. Complete with mounting bolts. Note this is for the adjustable type. See STAH-0018 for non adjustable fixed type.
Seat Cowling, (Carbon), NC30/NC35 GP-T
€1,139.19
Seat Cowling, (Carbon), NC30/NC35 GP-T
This product is the latest TYGA design for the 400 V4 and is designed to be stylish and lightweight. This product includes ONLY the seat cowling for replacement in the event of an accident or can be used for a project bike of another model. For the MC21, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification. For installation of any other model the customer will need to make the necessary modifications,
BPFS-0148 (GRP, NC30)
BPFS-0149 (GRP, NC35)
BPFS-0150 (Carbon, NC30)
BPFS-0151 (Carbon, NC35)
The advantages of this seat cowling over stock include:
– use with rest of seat cowling kit, much lighter than stock
– new design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9133).
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment
Tyga Performance Compatible Parts for this Product:
This product is compatible with:
BPFX-9034 and BPCX-9134 Undertray, NC30/NC35 GP-T
TYLY-0133 Subframe, NC30/NC35 GP-T
TYLY-0130 Batterybox NC30/35 GP-T
BPFX-9234 Seat Support, NC30/NC35 GP-T
BPSP-0006 Seat Pad, GP-T
BPAC-0001 Rear Brake Reservoir Kit,
BPLT-0009 LED Taillight
BPFX-9133 Registration Plate Holder GP-T
TYGA no: BPCT-9034
SKU: hon-10764 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork and carbon, Bodywork and carbon, RVF400RR NC35, VFR400RR NC30Carbon rear protector, Honda MSX125 MK1 and Mk2
€271.68
Carbon rear protector, Honda MSX125 MK1 and Mk2
Easy to install, prevents road debris and water flicking up on the rear of your bike and looks way cool!
Not cheap plastic, but a beautiful carbon product.
TYGA no: BPCH-7228
SKU: MSX-10388 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Various parts, Various partsSet, pipe full race system round aluminium silencer RH exit, VFR750F gen 4, 94-97
€1,203.58
Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer, VFR750F, Gen 4, ’94-’97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system comes with the 450mm Round Auluminium Silencer but can be used with a number of our 2″ slip on exhaust silencers
See also our other sets with silencer included:
EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand and pillion foot rests however, the centre stand must be removed prior to installation.
TYGA no: EXPS-0132
SKU: hon-11042 Categories: ALL products, Exhaust systems, Exhaust systems, Exhausts, Honda, Shop, VFR750F Gen 4, 94-97Seat set with carbon race, Honda NSR250 MC21
€606.64
This set of bodywork is designed to replace the stock seat cowling with the race version of our GP Race Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC21 but also an MC28 fitted with an MC21 fuel tank. The kit comprises of the parts below which are also available separately.
We make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. . For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessary parts to complete the modification.
BPFS-0003 (street)
BPFS-0004 (race)
uses BPFT-9002 MC21 with carbon front section
BPFS-0059 (street)
BPFS-0060 (race)
uses BPFT-9102 MC21 all GRP construction
BPFS-0004 (street)
BPFS-0005 (race)
uses BPFT-9012 MC28 with carbon front section
BPFS-0045 (street)
BPFS-0046 (race)
uses BPFT-9112 MC28 all GRP construction
The advantages of this seat cowling over stock include:
– Design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment as well as lighter weight.
TYGA no: BPFS-0004
SKU: hon-10224 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, ShopLower cowling GRP RC30 style, Honda VFR400 NC30
€260.33
This is the all GRP seat cowling used in the NC30 RC211V style seat cowling kits, BPFS-0028 and BPFS-0034.
This product is suitable as a replacement seat cowling in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC30.
To be used with:
subframe TYLY-0025
battery box TYLY-0026
taillight BPLT-0013
registration/license plate holder BPCX-9007
TYGA no: BPFL-0121
SKU: hon-11423 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, Shop, VFR400RR NC30Steering stoppers (pair) adjustable, Aprilia RS250
€34.64
CNC machined adjustable steering stoppers. These adjusters have the mounting hole positioned eccentrically to enable the piece to be rotated /- 2.5mm to find the optimum steering travel. Ideal for race bikes to limit the amount of steering available and prevent tank slappers and clearance issues with components.
TYGA no: TYLY-0076
SKU: apr-10059 Categories: ALL products, Aprilia, CNC parts, CNC parts, RS250, Shop