Front Fender red, Honda MSX125 GROM
€88.02
Front Fender, Valentine Red, MSX125 Grom
TYGA no: 61100-K26-900ZB
SKU: MSX-10098 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopTriple Clamp Set, CNC, Silver 3D Top Triple Clamp, Black Lower Clamp, NC35 RVF400
€673.59
CNC machined TYGA triple clamp set for your NSR250 MC28.
These stylish, all aluminium triple clamps are a direct replacement for the MC28 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all necessary bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ key holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3312
SKU: hon-11265 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35, Stock list, all modelsCarbon dynamo cover, Yamaha R6 2006-12
€102.33
Carbon dynamo cover
Let your bike stand our from the crowd.
TYGA no: BPCC-7309
SKU: yam-10019 Categories: ALL products, Carbon, Shop, Yamaha, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12kickstart stopper, Honda NSR250 MC18/MC21/MC28
€25.10
Kickstart stopper. Reduces degree of swing on the kick start to prevent the kick start hitting race fairings. Still allows for full movement, but elliminates the slight upward swing at the end of the stroke.
Easy to install and ideal for race bikes or NSRs fitting with TYGA fairings*
*This part is included as part of the kit with all TYGA fairings which require a kick start stopper so no need to order seperately when ordering our bodywork sets.
TYGA no: BPSY-0034
SKU: hon-10540 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopFuel Tank, GRP, NSR250 MC21, Unpainted
€1,036.32
Fuel Tank, GRP, NSR250 MC21, Unpainted
Top quality reproduction of the steel MC21 fuel tank in GRP. This product is a direct replacement for the stock fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
Note, will only fit MC21 type seat cowlings.
TYGA no: BPFG-0004
SKU: hon-11193 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC21, ShopFitting kit for Under cowl BPFL-7328 and BPCL-7328
€32.07
Fitting Kit for Under Cowl BPFL-7328 and BPCL-7328
Complete replacement fitting kit for TYGA-Performance Under Cowl (Belly exhaust type) for Honda MSX125/GROM
Suitable for BPFL-7328 (all colours) and BPCL-7328
Only sold as complete set.
TYGA no: TYBP-7328
SKU: msx-10463 Categories: ALL products, Honda, Monkey 125 2018-, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, Shop, Various parts, Various partsLower triple clamp CNC Silver, Honda RVF400 -> CBR600 fork
€367.66
Lower Triple Clamp, CNC Silver, CBR600RR forks/NC35 shaft
CNC machined TYGA lower triple clamp for the NC35 RVF400 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your or der that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings. To complete the set we recommend you also order:
Seals: 53214-371-010 & 53214-KA4-701
Bearings: 91015-KT8-005 & 91016-KT8-005
This product is also sold as part of a set TYLY-0742, Triple Clamp Set, CNC Silver, CBR600RR Forks to fit NC35.
O-Ring, Main shaft, MC21/28SP
€2.18
O-Ring, Main shaft, MC21/28SP
TYGA no: 91303-KV3-780
SKU: hon-11076 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28