Lower cowling original, NC30
€165.06
Street one piece lower cowling with open bottom as stock. Direct replacement for OEM Honda lower left, right and inner cowls. Can be used with most of our range of upper cowlings. See below
Compatible Parts:
NC30 and mid cowlings, Tyga upper cowlings: BPFU-0009, BPFU-0010, BPFU-0011, BPFU-0012, BPFU-0014, BPFU-0016, BPFU-0020
TYGA no: BPFL-0003
SKU: hon-10083 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Seat set with carbon street, Honda NSR250 MC28
€647.60
This set of bodywork is designed to replace the stock seat cowling with the street version of our GP Race Seat cowling and includes all parts needed to do the conversion. The kit comprises the parts below which are also available separately.
We make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. . For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessary parts to complete the modification.
BPFS-0003 (street)
BPFS-0004 (race)
uses BPFT-9002 MC21 with carbon front section
BPFS-0059 (street)
BPFS-0060 (race)
uses BPFT-9102 MC21 all GRP construction
BPFS-0004 (street)
BPFS-0005 (race)
uses BPFT-9012 MC28 with carbon front section
BPFS-0045 (street)
BPFS-0046 (race)
uses BPFT-9112 MC28 all GRP construction
The advantages of this seat cowling over stock include:
– Design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment as well as lighter weight.
TYGA no: BPFS-0005Â
SKU: hon-10241 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, By model, Honda, NSR250 MC28, ShopCarbon rear hugger stock shape, Honda Monkey 125 2018-
€162.86
Rear Fender, Carbon, stock shape, Monkey 125 2018-
Carbon direct replacement for original part. Lighter and looks way, way cooler!
IMPORTANT, Rear fender BPCH-7042 is not compatible with the Honda number
plate holder (part number 80100-KOF-T00 ) due to the weight of the Honda
part. We recommend when installing BPCH-7042 that TYGA registration holder
BPCK-7142 is installed instead
TYGA no: BPCH-7042
SKU: msx-10427 Categories: ALL products, Bodywork and carbon, Honda, Monkey 125 2018-, ShopTop End Rebuild Kit MC18, Cyl. B, Assy.
€293.88
Below is everything you need to do a top end rebuild on your MC18. Suitable for cylinder ‘B’. One kit includes all parts for one cylinder. To overhaul both cylinders please order 2 kits.
There are different kits depending on the piston supplied and the pistons are sized to match the cylinder. The cylinders have a letter stamped on them. A cylinder = B piston B cylinder = no mark piston, C cylinder = D piston. The largest cylinder bore is A and the smallest is C. However, note that this is only for when cylinders are new or in good condition, so if the cylinder is worn, the corresponding piston will be a looser so a bigger piston might be advised. If the cross hatch honing of the cylinder is very feint then we suggest using the next size up piston. The differences in sizes are tiny (11 microns between largest and smallest) and for the most part not an issue so it is not a problem if a smaller piston is used in a larger cylinder or the other way round.
Cylinder A = 54.008mm – 54.011mm use Piston B = 53.966mm – 53.969mm
Cylinder B = 54.004mm – 54.008mm use Piston # = 53.962mm – 53.965mm
Cylinder C = 54.000mm – 54.004mm use Piston D = 53.958mm – 53.961mm
Piston to bore clearance = 0.039mm – 0.045mm
TYGA no: NHPS-0002B
SKU: hon-10837 Categories: ALL products, High performance, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC18Exhaust Chamber, Right, GP Type, Stainless Steel, RGV250, VJ22
€281.46
Bare replacement right side chamber for chamber set EXCS-0010R
Seat cowling duo stock shape painted RR, Honda RVF400 NC35
€447.62
Seat Cowling (GRP), NC35, Dual, Stock Shape (Painted RR)
Stock shape seat cowling with taillight holes and mounts. Direct replacement for stock NC35 seat cowling in the exact same shape but without the nasty joins. This seat cowling uses OEM seat pad and taillight.
Compatible Parts:
All Tyga Performance and Honda OEM panels. Retains use of Honda OEM taillight and seat pad
Painted in classic RR scheme (1994-1995). This panel is finished to match the stock paintwork
TYGA no: BPFT-9204 RR
SKU: hon-10649 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35key holder CNC silver, Suzuki RGV 250
€121.39
Ignition Switch Holder, CNC Silver, Suzuki RGV250 VJ22
This is a removable ignition switch/lock holder for our Suzuki RGV250 VJ22 top triple clamp. Can be ordered as part of a triple clamp set or by itself or to fit to our TYGA triple clamps TYLY-1046.
TYGA no: TYLY-0146
SKU: suz-10059 Categories: ALL products, CNC parts, CNC parts, RGV250 VJ22, Shop, SuzukiCarbon hugger, Ducati Desmosedici RR
€303.12
This rear hugger protects the rear shock and underside of your Desmo from road dirt as well as give it that finishing touch. Made from 3 layers of pure carbon and finished in highly polished UV resistant clearcoat, it is very easy to install. Weight approx. 0.3 kg.