Silencer stainless round, 2" x 380mm
€230.91
Silencer, Stainless, Round, 2" x 380 mm., Assy
This silencer has polished stainless steel endcaps and a hairline finish stainless tube for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2" external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
Compatible with TYGA and other systems which use a 2" external diameter tail pipe, this silencer uses a 4" x 380 mm. outside Stainless tube.
* Please note that decibel killer model EXDK-0003 is compatible but not included with this exhaust system. Please add EXDK-0003 to your cart if you wish it to be included in your order.
TYGA no: EXSL-0079
SKU: hon-11010 Categories: ALL products, exhaust system replacement parts, Exhaust systems, Exhausts, Honda, Shop, VFR750F Gen 4, 94-97Set pipe Full race system WSS300 (race), KTM Duke 390
€1,129.89
Set, Pipe, Full Race System, WSS300, (Race) KTM 390 Duke
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390 Duke. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield.
WEIGHTS
EXPS-0142 (the full system) 3.8 kg
Weights Separate parts in the set:
Silencer EXSL-0074 : 1.55 kg
Final section EXPT-0078: 1.3 kg
Header pipe EXPT-0077: 0.6 kg
all other components (manifold clamp, db killer, heat shield hoses etc) 0.35
Carbon stay silencer left, VFR750F gen 4, 94-97
€54.55
Stay, Carbon, Silencer, Left, VFR750F, Gen 4, ’94-’97
Carbon Silencer stay. A light weight, strong and elegant solution to securing the silencer. Used on:
EXPS-0119 Set, Pipe, Full Race System, VFR750F, Gen 4, ’94-‘9, (No Silencer)
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer
TYGA no: TYLY-0235
SKU: hon-11033 Categories: ALL products, exhaust system replacement parts, Exhausts, Honda, Shop, VFR750F Gen 4, 94-97Carbon fairing stay side 87mm (pair), universal
€82.47
Fairing Stay, Side, Pair, Carbon, NSR250, GP-T, Assy.
Designed specifically for the NSR250 GP-T fairing, these side stays fit to the frame in the same position as the steel Honda stays. Made from lightweight carbon fiber with nylon bungs and ‘R’ clips, they are longer than stock and provide the correct position for perfect fitment of the GP-T fairing. This product can also be used with any other race fairings or similar application. See drawing for dimensions. Also see similar product BPSY-0144 Assy.
Dimensions:
BPSY-0143: length from centre of mounting hole to inside face of fairing with nylon bung = 87 mm.
BPSY-0143B: length from centre of mounting hole to inside face of fairing with nylon bung = 77 mm.
Compatible products:
TYGA upper cowlings, BPFU-9033 and BPCU-9033.
TYGA no: BPSY-0144
SKU: hon-10537 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC21, NSR250 MC28, ShopCarbon front fender, Kawasaki Ninja 400 2018-
€230.75
Front Fender (Carbon) Ninja 400 (2018-)
This lightweight carbon front fender replaces the plastic item, reduces unsprung weight and is an easy installation.
TYGA no: BPCF-7040
SKU: kaw-10149 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-Stay, Silencer, KTM RC390 Serpent
€56.39
Stay, Silencer, KTM RC390 Serpent
TYGA no: BPSY-0167
SKU: ktm-10121 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsFuel Tank, Carbon, VFR400 NC30
€1,444.49
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPCG-0005
SKU: hon-11228 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30Carbon airduct (pair), Honda NSR125 JC22
€240.81
Air Ducts, Pair, (Carbon) JC22 NSR125
Real Carbon fibre reproduction of the stock OEM Honda front fender. Finished in high gloss, adds beauty and makes your bike stand out from the crowd.
TYGA no: BPCX-7035
SKU: hon-10481 Categories: ALL products, Carbon, Honda, NSR125 JC22 1994 - 2003, Shop