Carbon holder brake hose "NSR500V style), NSR250 MC28 – NC30 – NC35
€45.78
Holder, Carbon, Brake Hose, NSR500V Style
This carbon brake holder is a faithful reproduction of HRC part 43150-NX6-000 used on the HRC NSR500V GP bike.
It allows for removal of the stock chain guard by providing a safe way of securing the rear brake line on any Pro Arm model such as the MC28, NC30 and NC35. To install this holder, it is necessary to drill and tap two small mounting holes in the swing arm to secure the holder using the bolts and washers provided with the holder. The holder is also supplied with cable ties and rubber hose suitable for braided brake lines in order to keep the brake line held in position while at the same time looking neat and tidy.
Important: care should be taken during installation to allow adequate clearance of the brake line with the chain and rear wheel when the bike is being ridden allowing for movement due to suspension etc.
TYGA no: BPCC-0051
SKU: hon-11203 Categories: ALL products, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC28, NSR500V NX6, RS250R NF5 / NX5, RVF400RR NC35, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Fairing set race no air duct, Aprilia RS250
€663.95
This kit comprises of the parts shown below which are also available separately.
* A clear screen is provided unless you specify tinted in the comment box at check out
This kit is supplied with all additional fasteners required to mount it to a stock Aprilia RS250 MKII
Fairing set race no air duct, Aprilia RS250
This kit comprises all the parts shown on picture, which are also available separately.
For Aprilia RS250 MK1 owners, you can use this fairing but it’s not a direct fit.
The dash is different, the digital meters (MK2) fits the TYGA frame.
Tank MK1 looks the same but is little different. The seat needs adjustment the tank is a little bigger.
The cooling- and oil tank are in the sub frame (MK1) and on the side of the frame MK2.
The steps left and right of the MK2 have extra brackets, the MK1 don’t have these. You need them to fit the lower TYGA cowling.
TYGA no: BPFS-0101
SKU: apr-10033 Categories: ALL products, Aprilia, Bodywork, Bodywork and carbon, RS250, ShopWheel Bearing Set, Rear MC18/21
€45.83
Replacement Rear wheel bearing. OEM quality assured
3x Bearings included
Also includes sprocket carrier bearing
TYGA no: TYPP-0010
SKU: hon-10834 Categories: ALL products, Honda, NSR250, NSR250 MC18, NSR250 MC21, Various parts, Various partsVHM Cyl. Headset Husqvarna TC125 ’14 –
€271.95 €256.04
VHM Cyl. Headset Husqvarna TC125 ’14 -> (alg-10215) AA33097VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.We are pleased that we can offer VHM products on our website.VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:1x cylinder head1x standard insert (11.60cc)Optional inserts:– blind– 11.20– 11.40– 11.80– 12.00This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.Note: please put in comment box, the year of your bike and what size insert you want (no comment is STD insert).Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AA33097.
SKU: alg-10215 Categories: ALL products, Husqvarna MX, Motocross, Shop, VHM productsLock Washer, Headstock Nut, MC28
€7.18
Lock Washer, Headstock Nut, MC28
TYGA no: 90506-425-830
SKU: hon-11125 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Rod M6 leftd.
€14.78
Replacement rod end joint for your TYGA Step Kit.
M6 LH F. Rod End SILBP6S
TYGA no: STRE-1006
SKU: alg-10039 Categories: ALL products, By model, CNC parts, Kawasaki, Ninja 400R 2018-, ShopFairing stay front, GP-T. Honda NSR250 MC21/MC28
€19.98
Fairing Stay, Front, NSR250, GP-T, Assy.
This stay mounts to the stock Honda meter stay or TYGA meter stays TYLY-0004 and TYLY-0005 and allows for fitment of the upper fairing BPCU-9033 and BPFU-9033. Supplied complete with plastic bung for quick fairing assembly and removal.
Compatible Parts
TYGA upper cowlings, BPFU-9033 and BPCU-9033.
TYGA no: BPSY-0155
SKU: hon-10536 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork and carbon, Bodywork and carbon, NSR250 MC21, NSR250 MC28, ShopExhaust stay hanger (pair), Honda NSR250 MC18 (1988)
€35.22
This pair of stays replaces the stock rear passenger peg hangers and is required to mount the Tyga Exhaust system EXCS-0003 on the 1988 MC18. Not suitable or required for the 1989 version with the flip down passenger pegs.
TYGA no: BPSY-0130
SKU: hon-10415 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, Honda, NSR250 MC18, Shop