Battery box GP-T, Honda VFR400/RVF400
€53.68
Battery Box, NC30/35 GP-T, Assy.
Precision laser cut and hand welded, this aluminium battery box is part of our GP-T seat cowl kit. Strap and fastening screws provided
Compatible Parts:
Only to be used with NC30 RC211V seat cowl BPFT-9034 and BPCT-9034, subframe TYLY-0133 used in our seat cowling sets, BPFS-0148, BPFS-0149, BPFS-0150 and BPFS-0151
TYGA no: TYLY-0130
SKU: hon-10595 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork and carbon, RVF400RR NC35, VFR400RR NC30Cowling, Upper, Green, Ninja 250R 2008 -12
€169.81
Cowling, Upper, Green, Ninja 250R 2008 -12
TYGA no: 55028-0153-777
SKU: kaw-10195 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopSeat Pad, NSR250V
€67.02
Kit, Seat Set, GRP, (Street), MC21, MC28, NSR250V
Modelled closely from the seat cowling taken off an actual NSR500V HRC factory machine, this seat cowling kit has been designed to faithfully reproduce the appearance and silhouette of the NSR500V but in proportion to the NSR250. This seat cowling set can be installed with both the MC28 and the MC21, (though to fit it on a MC21 you will need an MC28 fuel tank or TYGA Fuel tank BPCG-0001 or BPFG-0001). The set consists of the parts shown below and has a taillight for street use and special mounting hardware and seat pad provided.
We have designed the seat cowling so that for fuel tank removal, there is no need to remove the seat cowling, making for quick and easy jet changes and maintenance etc. Note, you do not need to change the subframe for either the MC21 or MC28 models to install this seat cowling which bolts to the stock subframe holes at the rear and special front lower subframe mounting positions with all hardware provided. The seat cowling has threaded holes in the underside to attach exhaust stays TYLY-0243L and TYLY-0243R for use with NSR250V exhaust system EXCS-0047
We recommend installing this seat cowling set with fairing set BPFS-0195 on the NSR250 to complete the NSR250V bodywork style. For a complete transformation of the whole bike, we also recommend exhaust system EXCS-0047 and EXSL-0083 or EXSL-0084.
TYGA no: BPSP-0008
SKU: hon-11062 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Shaft Holder, 11~16mm
€35.02
This handy tool can be used to hold shafts, bolts or any round object securely.
Just select the correct hole size and clamp it all up in the vice
Manufactured from 6061 aluminum for strength and durability, it will clamp most metallic components without damage
Shaft sizes: 11mm, 12mm, 13mm, 14mm, 15mm & 16mm.
I’ve been using this tool for so long, for so many applications that it seemed only fair to share it!
Racing stepkit black/RED adjustable, Honda Monkey 2018
€477.27 €395.87
Racing Rear Set Kit, Adjustable, Black, Monkey 125
With all major components designed specifically for the Monkey 125 in mind, this rear set kit is the best on the market. Designed in-house by TYGA Performance using the latest CAD/CAM software, these tough CNC machine-made step kits are made from top quality, aircraft grade aluminium and utilise TYGA’s unique and elegant system to provide ten different foot peg positions. The kit features levers moving on ball bearings to give precise and smooth movement. In addition to the technical specifications, emphasis has also been given to make the steps as uncluttered as possible with the rear master cylinder hidden from view and no unsightly unused holes on view etc. The kit comes complete, ready to bolt on with stainless steel fasteners, new OEM Honda axle bolt and carbon heel guards. With individualism in mind, there is a choice of ten colour combinations available and all components are available as replacement or separate items.
Notes:
No real brake light provision. If required, we recommend installation of inline pressure switch.
Fitting this rear set requires replacing the axle bolt with a slightly longer one, a new orginal OEM honda axle bolt is included
This rear set cannot be used in a reverse (GP) shift pattern
TYGA no: STAA-1027RED
SKU: msx-10417 Categories: ALL products, CNC parts, Honda, Monkey 125 2018-, ShopSeal, Clutch Pusher, MC28 SE/SP
€4.54
Seal, Clutch Pusher, MC28 SE/SP
TYGA no: 91302-KV3-781
SKU: hon-11104 Categories: ALL products, High performance, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Subframe, aluminium TYGA GP seat, RGV250 VJ22
€239.94
CNC machined TYGA triple clamp set for your RGV250 VJ22.
These stylish, all aluminium triple clamps are a direct replacement for the OEM VJ22 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered without seals and bearings, but include an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy. Weights 1800 gram.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
Update your RGV250 with these light, strong and cool triple clamp set.
TYGA no: TYLY-1028
SKU: suz-10211 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, CNC parts, RGV250 VJ22, Shop, Suzuki, Various partsTyre warmers (set) Moto3 / GP125
€302.62 €275.95
Tyre Warmers, Moto3/GP125
All new TYGA Tyre warmers are specifically designed to meet the needs of every racer and track day rider.
Fully adjustable, digital temperature control allows you to set your tyre temperatures to suit every situation with just a press of a button. The remote control box allows for quick and easy monitoring of temperatures.
Tyre warmers are an essential tool for any track excursion. For the racer it allows for lightening first lap action to get the jump on your competitor, and for the track day specialist there’s no more wasted laps trying to get heat into your tyres.
Another great feature is that you can refit the warmers between session and just set at a lower temperature to stop your tyres heat cycling . This gives you more tyre grip for longer, so your tyre won’t go off half way through the day.
These warmers are designed for GP125, Moto3 motorcycles, running the usual 100~110-17” front tyre, and 110~125-17” rear tyre.
TYGA tyre warmers are designed to run on 220V, and use a C type plug. Power rating is 550W rear and 450W front.
TYGA no: TWDS-0009
SKU: alg-10199 Categories: ALL products, Aprilia, Cagiva, Duke 125/200 2012- 16, KTM, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, RC 125/200, RS125, RSV125, Shop, Tyre warmers, Various parts, Various parts, Yamaha, YZF-R125 2009-