Silencer kevlar/carbon SHORTY 60mm 2 stroke
€156.20
This high quality shorty (55mm shorter than our other silencers) lightweight silencer (0.40kg) is made from CNC machined end caps joined by a Carbon/Kevlar fiber tube. It has a built-in sealing ‘O’ ring and is supplied with stainless steel bolts and washers for fitment.
Note this product is intended to be used with our exhaust chambers (EXCS-****) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber.
Compatible Products:
All Tyga Performance Two Stroke chambers sets. Remember to order the correct number of silencers for a complete system!
Other Alternative Products:
EXSL-0065 Shorty Carbon
EXSL-0067 Shorty Aluminium
EXSL-9005 Aluminium
EXSL-0003 Carbon
EXSL-0004 Carbon/Kevlar
TYGA no: EXSL-0066
SKU: alg-10259 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, ShopTurn signal Set black/blue, Honda RC30 style
€192.87
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPLT-0038
SKU: hon-11546 Categories: ALL products, Electrical, Honda, RC36-2 -> RC30 replica products, Shop, StocklistCarbon cover, temp Gauge 64mm, Honda
€25.10
Carbon cover, temp Gauge 64mm, Honda
This cover fits snuggly over the original plastic Honda gauge cover and adds a sporty appearance. It is also ideal for hiding any ugly scratches or dents that may have occurred over the years. Fits in second and can be held in place with a dab of glue or silicone adhesive.
This product is suitable for the following models:
MC18 NSR250
NC30 VFR400R
RC30 VFR750R
Also available as a complete set with speedo,temp gauge and rev counter, see BPCC-0027
This product might also fit other models.
TYGA no: BPCC-0024
SKU: hon-10609 Categories: ALL products, Carbon, CBR400RR NC23, Honda, NSR250 MC18, Shop, Various parts, Various parts, VFR400RR NC30Front fender (GRP), NX6 NSR500V
€102.49
Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame without Steering Damper)
These lightweight carbon covers fit over the frame and they are designed to protect against scratches and damage to the frame in the event of an accident.
Note that some examples of the VJ21 had no steering damper mounting boss. Also some other frames have the steering damper mounting boss in a different position. For those frames, ypou also can ise thsi set this set and cut a hole to suit.
See also Set: BPCC-7021 Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame with Steering Damper)
Top end rebuild set Cylinder B, Honda NSR250 MC21/MC28
€293.88
The picture shows everything you need to do a top end rebuild on your MC21/28. One kit includes all parts for one cylinder (cylinder ‘B’). To overhaul both cylinders please order 2 kits.
Honda OEM:
1x Gasket cylinder 12192-KV3-680
1x Gasket head 12251-KV3-830
1x Piston ring 13010-KV3-305
1x Piston no mark 13102-KV3-830
1x Piston pin 13111-KV3-771
1x RC valve shaft E clip 90601-KV3-000
1x Bearing piston 91102-KV3-771
1x Seal, RC valve shaft 91201-PA9-004
2x Dowel cylinder 94301-10160
2x Piston Circlip 15mm 94601-15000
There are different kits depending on the piston supplied and the pistons are sized to match the cylinder. The cylinders have a letter stamped on them. A cylinder = B piston B cylinder = no mark piston, C cylinder = D piston. The largest cylinder bore is A and the smallest is C. However, note that this is only for when cylinders are new or in good condition, so if the cylinder is worn, the corresponding piston will be a looser so a bigger piston might be advised. If the cross hatch honing of the cylinder is very feint then we suggest using the next size up piston. The differences in sizes are tiny (11 microns between largest and smallest) and for the most part not an issue so it is not a problem if a smaller piston is used in a larger cylinder or the other way round.
Cylinder A = 54.008mm – 54.011mm use Piston B = 53.966mm – 53.969mm
Cylinder B = 54.004mm – 54.008mm use Piston # = 53.962mm – 53.965mm
Cylinder C = 54.000mm – 54.004mm use Piston D = 53.958mm – 53.961mm
Piston to bore clearance = 0.039mm – 0.045mm
TYGA no: NHPS-0001B
SKU: hon-10440 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopCarbon heel guards curved left , universal
€44.37
Right side carbon fibre heel guard. More curved inboard compared to BPCC-9110.
TYGA no: BPCC-9210L
SKU: alg-10275 Categories: ALL products, By model, By product, Carbon, Honda, NSR125 JC22 1994 - 2003, NSR150SP, RS250R NF5 / NX5, Shop, Various partsDecal set, type 3 Pearl valentine red scheme, Honda MSX125 GROM
€46.17
Decal Set, MSX125, Type 3, 2013 Pearl Valentine Red Scheme. This set comprises of a complete set of all the OE Honda decals required for the painted panelson the MSX125. Note it includes the decal ‘MSX125’ not ‘Grom’ as used in some markets.
TYGA no: STIC-0026R
SKU: MSX-10115 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopCarbon fork guard right, Honda Monkey 125 2018-
€84.32
Carbon fork guard right, Honda Monkey 125 2018-
Carbon direct replacement for original part. Lighter and looks way, way cooler!
TYGA no: BPCC-7042R
SKU: msx-10434 Categories: ALL products, Bodywork and carbon, Honda, Monkey 125 2018-, Shop